Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

2种亚洲龙鱼的D-Loop序列结构分析

采用PCR技术对2种亚洲龙鱼的mtDNAD_Loop全序列进行扩增和测序,序列结构分析和序列同源性比对结果表明,2种亚洲龙鱼的mtDNAD_Loop在靠近5’端有3个终止相关序列TAS(Ⅰ、Ⅱ、Ⅲ),靠近D_Loop的3’端有4个保守区域CSB1、CSB2、CSB3、CSB-D。在终止相关序列和保守区域之间是连续重复区域。经DNASP4.0软件分析,全序列中检测出多态位点数(S)为26,其中有17个转换,核苷酸多样性(Pi)为0.013,平均核苷酸差异数(K)为17.333。     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

The influence of a non‐associated flow rule on the calculation of the factor of safety of soil slopes

This paper presents a method that incorporates a non‐associated flow rule into the limit analysis to investigate the influence of the dilatancy angle on the factor of safety for the slope stability analysis. The proposed method retain's the advantage of the upper bound method, which is simple and has no stress involvement in the calculation of the energy dissipation and the factor of safety. Copyright © 2001 John Wiley & Sons, Ltd.     

浅析宁波盆地膏盐地层的时代──兼对“宁波盆地北部的长河群”之时代质疑

宁波盆地地下揭示的一套包含暗色膏硝质泥岩、泥质白云岩在内的紫红、灰紫色泥岩、棕褐色砂砾岩、细砂岩和玻屑凝灰岩的地层，均称方岩组，内含膏盐并具油色显示。对其时代有早、晚白垩世和早第三纪之认识，笔者从70～90年代地质工作中所获化石分析认为，虽然宁波盆地这一层位含化石不丰，但从分布及数量上比较，相对占优势的应该是孢粉和植物化石，其时代意见也较为一致，指示为早白垩世。     

Abundance and isotopic composition of noble gases in metal and graphite of the Bohumilitz IAB iron meteorite

Abstract— Abundances and isotopic compositions of noble gases in metal and graphite of the Bohumilitz IAB iron meteorite were measured. The abundance ratios of spallogenic components in metal reveal a ³He deficiency which is due to the diffusive loss of parent isotopes, that is, tritium (Tilles, 1963; Schultz, 1967). The diffusive loss likely has been induced by thermal heating by the Sun during cosmic‐ray exposure (～160 Ma; Lavielle et al, 1999). Thermal process such as impact‐induced partial loss may have affected the isotopic composition of spallogenic Ne. The ¹²⁹Xe/¹³¹Xe ratio of cosmogenic components in the metal indicates an enhanced production of epi‐thermal neutrons. The abundance ratios of spallogenic components in the graphite reveal that it contained small amounts of metal and silicates. The isotopic composition of heavy noble gases in graphite itself was obtained from graphite treated with HF/HCl. The isotopic composition of the etched graphite shows that it contains two types of primordial Xe (i.e., Q‐Xe and El Taco Xe). The isotopic heterogeneity preserved in the Bohumilitz graphite indicates that the Bohumilitz graphite did not experience any high‐temperature event and, consequently, must have been emplaced into the metal at subsolidus temperatures. This situation is incompatible with an igneous model as well as the impact melting models for the IAB‐IIICD iron meteorites as proposed by Choi et al. (1995) and Wasson et al (1980).     

Radar observations of Itokawa in 2004 and improved shape estimation

Abstract— We present June 2004 radar images of asteroid 25143 Itokawa (1998 SF36) that improve upon the longitude‐latitude coverage of images obtained in 2001 by Ostro et al. (2004) and use the 2001–2004 data to refine that paper's constraints on Itokawa's shape. The 2004 images, the first of the asteroid's southern side, look distinctly different from the 2001 images, revealing leading edges that are much more curved and rugged than the nearly convex leading edges seen at northern latitudes in 2001. Itokawa is shaped like a slightly asymmetrical, bent, lumpy ellipsoid with dimensions along the principal axes within 10% of 594 times 320 times 288 m. To illustrate the uncertainty space associated with shape reconstruction from images with suboptimal orientational coverage, we present two alternative three‐dimensional models of the object.     

Determination of physical parameters of NGC 2023 using the hyperfine NH3 spectrum

An improved approach is given for deriving the physical parameters of a molecular cloud by its NH₃ rotation-inversion hyperfine spectra. The optical depth τ₀(1, 1) of NH₃ (1,1) is obtained by considering the blending effect of the magnetic hyperfine spectral lines, the (1-1) excitation temperature T_ex (1, 1) is calculated by a two level model, the effect of different collision rate and the thermalization of the (1, 1) inversion lines are discussed, the rotation temperature T_R ( 2, 1) between the NH₃ levels (2, 2) and (1, 1) and the column density N( 1, 1) of the NH₃ (1, 1) inversion level are derived, the results of the total column density from different assumptions for the abundance ratio of ortho-NH₃ and para-NH₃ are also discussed.

This approach is used for the molecular cloud NGC 2023 by using the relevant observed data and its optical depth and other physical parameters are obtained.     

Some Problems with Slow Rotation of CP Stars

Some difficulties in explaining the slow rotation of CP stars are discussed. The most likely hypotheses are (1) a loss of angular momentum involving a magnetic field during “pre-main sequence” evolution and (2) the slow rotation existed from the very start of the creation of these stars. The braking hypothesis is supported by only one property of CP stars— the lower the mass of the star is, the greater the difference between its average rotation velocity vsini and that of normal stars. On the other hand, there is another property— the lower the rotation speeds of CP stars are, the greater their fraction among normal stars. The latter property supports the hypothesis that the lower the initial rotation speed of a star is when it is created, the greater the probability will become chemically peculiar. This property is inherent in chemically peculiar stars both with and without a magnetic field. It is proposed that the cause of the slow rotation of CP stars must be sought in the very earliest phases of their formation, as should the cause of the separation into chemically peculiar magnetic, chemically peculiar nonmagnetic, and normal stars.__________Translated from Astrofizika, Vol. 48, No. 2, pp. 229–245 (May 2005).     

Depositional and post‐depositional history of warm stage deposits at Knocknacran,Co. Monaghan,Ireland: implications for preservation of Irish last interglacial deposits

Organic‐rich deposits, uncovered during overburden removal from mantled gypsum karst at Knocknacran opencast gypsum mine, Co. Monaghan, are the best candidate to date for a last interglacial record in Ireland. The two till and organic‐rich deposits (preserved at different quarry elevations) were emplaced on to a Tertiary dolerite surface during high‐energy flood events and subsequently folded and faulted by movement towards sinkholes in underlying gypsum. Uranium–thorium disequilibrium dating suggests that the organic‐rich deposits in the upper section were hydrologically isolated at ca. 41 ka and those in the lower section at ca. 86 ka. Interpretation of the pollen content, although tentative because of the depositional and post‐depositional history of the material, suggests that the organic material originated in a warm stage possibly warmer than the post‐Eemian interstadials. The unusual setting of preservation may indicate that in situ, last interglacial deposits have generally been removed by erosion in Ireland. Copyright © 2004 John Wiley & Sons, Ltd.