底质不连续面类型、成因及遗迹学特征

底质不连续面是沉积作用中断时所形成的一种地层界面。根据底质的粘结程度可将底质不连续面划分为两大类：固底不连续面和硬底不连续面。固底不连续面中的简单停积面依靠沉积序列的变化来识别，界面上、下的生物地层带是连续的；而复成停积面上、下的生物地层带不连续。在硬底不连续面中，硬底的上、下地层属于同一个沉积体系，而继承性岩底的上、下地层则属于不同的沉积体系，其间发生过重大的沉积间断。根据底质控制的Glossifungites遗迹相和Trypanites遗迹相可以有效地识别各类不连续面并解释其成因。三种类型的不连续面具有层序地层学意义：①侵蚀性不连续面，包括低水位侵蚀面（LSE）和海进侵蚀面（TSE）；②无沉积间断面；③沉积性不连续面（凝缩段）。     

Numerical simulations of deformation and movement of blocks within North China in response to 1976 Tangshan earthquake

Using methods of discontinuous deformation analysis and finite element (DDA+FEM), this paper simulates dynamic processes of the Tangshan earthquake of 1976, which occurred in the northern North China where its internal blocks apparently interacted. Studies focus upon both the movement and deformation of the blocks, in particular, the Ordos block, and variations of stress states on the boundary faults. The Tangshan earthquake was composed of three events: slipping motions of NNE-striking major fault, NE-striking fault near the northeastern end of the NNE-striking fault, and NW-striking fault on the southeastern side of the NNE-striking fault. Compared with previous studies, our model yields a result that is more agreeable with the configuration of aftershock distributions. A number of data are presented, such as the principle stress field during the earthquake, contours of the maximum shear stress, the strike-slip deformation between blocks near the earthquake focus, time-dependent variations of slips of earthquake-triggered faulting, the maximum slip distance, and stress drops. These results are in accord with the earthquake source mechanism, basic parameters from earthquake wave study, macro-isoseismic line, observed horizontal displacement vectors, etc. The Tangshan earthquake exerted different influences on the adjacent blocks and boundary faults between them, thus resulting in differential movement and deformation. The Ordos block seems to have experienced the small-scale counterclockwise rotation and deformation, but its northeast part, bounded on the east by the Taihangshan and on the north by the Yanshan and Yinshan belts, underwent relatively stronger deformation. The Tangshan earthquake also changed the stress state of boundary faults of the North China, leading to an increase in shear stress and a decrease in normal stress in the NW-trending Zhangjiakou-Penglai fault through Tangshan City and the northern border faults of the Ordos block, and therefore raises the potential risk of earthquake occurrence. This result is supported by the facts that a series of Ms ≥ 6 earthquakes took place at the northern margin of the Ordos block after the Tangshan earthquake.     

鄱阳湖组(第四系)的修订及特征

根据对鄱阳湖地区 Zk0 1钻孔柱状剖面的研究 ,对鄱阳湖组的定义进行修订、补充 ,认为鄱阳湖组为一套以青灰色淤泥质粘土、黄褐色粘土、粉质粉土为主夹少量粉砂或细砂的湖泊—河口三角洲相沉积。年代地层为第四系全新统 ,底界年龄约 6 2 10± 12 5 a B.P.,开阔湖泊沉积始于 32 4 0± 180 a B.P.,且由北向南时代渐新 ,具有明显的穿时性     

Croatia — a coastal and maritime country

Croatia, through its geographic position, is a Mediterranean/Adriatic and Central European/Danube state. As an Adriatic coastal state, it has a long maritime tradition, which is apparent in its well-developed shipping (2.4 million GT), the high-quality ship-building industry (among the top six in the world) and through its numerous sea ports, of which many were established in ancient times. The leading national port is Rijeka, which is at the same time an important transit port for Austria, Hungary, Slovakia and the Czech Republic.The exceptionally indented Croatian Adriatic coast with its attractive archipelagos and favorable climatic and oceanographic conditions in the coastal sea offers very advantageous conditions for comprehensive tourist utilization. This is particularly true of nautical tourism, which is complimented by a larger number of constructed and well-equipped yachting ports/marinas on the coast and islands.     

Influence of the Load Wavelength on the Permeability of a Viscosity Interface in the Mantle

Assuming a radially stratified Newtonian mantle in a steady-state approximation, we demonstrate that the permeability of a viscosity interface at 660-km depth strongly depends on the wavelength of buoyancy forces driving the flow. The flow induced by long-wavelength loads penetrates through the boundary freely even if the viscosity increases by two orders. In contrast, the boundary is practically impermeable for short-wavelength loads located in the upper mantle. Thus, a stepwise increase of viscosity is a significant obstacle for small descending features in the upper mantle, but huge upper mantle downwellings, or upwellings formed in the-lower mantle can overcome it easily. This indicates that certain care is necessary in interpreting the seismic structure of the mantle by means of flow models. The global tomographic image includes only the first few degrees of the harmonic series and, consequently, its interpretation in terms of a present-day flow field results in a predominantly whole-mantle circulation even for extreme viscosity contrasts.     

Remote sensing detection of atmospheric pollutants by differential absorption LIDAR 510M/SODAR PA2 mobile system

Summary Air pollution problem in the Czech Republic is very complex due to large number of factors as turbulent dispersion and chemical reactions concurring in the status of the PBL. For this 3D distribution of pollutants is a key information that cannot be given by conventional monitoring stations. Combined use of DIAL lidar and sodar can give access to such information. Case studies of air pollutants transport are presented using 3D concentration fields of NO₂ and ozone measured by lidar and meteorological conditions monitored by Doppler Sodar.     

Land subsidence and caprock dolines caused by subsurface gypsum dissolution and the effect of subsidence on the fluvial system in the Upper Tigris Basin (between Bismil–Batman, Turkey)

Karstification-based land subsidence was found in the Upper Tigris Basin with dimensions not seen anywhere else in Turkey. The area of land subsidence, where there are secondary and tertiary subsidence developments, reaches 140 km². Subsidence depth ranges between 40 and 70 m. The subsidence was formed as a result of subsurface gypsum dissolution in Lower Miocene formation. Although there are limestones together with gypsum and Eocene limestone below them in the area, a subsidence with such a large area is indicative of karstification in the gypsum. The stratigraphical cross-sections taken from the wells and the water analyses also verify this fact. The Lower Miocene gypsum, which shows confined aquifer features, was completely dissolved by the aggressive waters injected from the top and discharged through by Zellek Fault. This resulted in the development of subsidence and formation of caprock dolines on loosely textured Upper Miocene–Pliocene cover formations. The Tigris River runs through the subsidence area between Batman and Bismil. There are four terrace levels as T1 (40 m), T2 (30 m), T3 (10 m) and T4 (4–5 m) in the Tigris River valley. It was also found that there were some movements of the levels of the terraces in the valley by subsidence. The subsidence developed gradually throughout the Quaternary; however no terrace was formed purely because of subsidence.     

The Late Cretaceous Klepa basalts in Macedonia (FYROM)—Constraints on the final stage of Tethys closure in the Balkans

The waning stage(s) of the Tethyan ocean(s) in the Balkans are not well understood. Controversy centres on the origin and life‐span of the Cretaceous Sava Zone, which is allegedly a remnant of the last oceanic domain in the Balkan Peninsula, defining the youngest suture between Eurasia‐ and Adria‐derived plates. In order to investigate to what extent Late‐Cretaceous volcanism within the Sava Zone is consistent with this model we present new age data together with trace‐element and Sr–Nd–Pb isotope data for the Klepa basaltic lavas from the central Balkan Peninsula. Our new geochemical data show marked differences between the Cretaceous Klepa basalts (Sava Zone) and the rocks of other volcanic sequences from the Jurassic ophiolites of the Balkans. The Klepa basalts mostly have Sr–Nd–Pb isotopic and trace‐element signatures that resemble enriched within‐plate basalts substantially different from Jurassic ophiolite basalts with MORB, BAB and IAV affinities. Trace‐element modelling of the Klepa rocks indicates 2%–20% polybaric melting of a relatively homogeneously metasomatised mantle source that ranges in composition from garnet lherzolite to ilmenite+apatite bearing spinel–amphibole lherzolite. Thus, the residual mineralogy is characteristic of a continental rather than oceanic lithospheric mantle source, suggesting an intracontinental within‐plate origin for the Klepa basalts. Two alternative geodynamic models are internally consistent with our new findings: (1) if the Sava Zone represents remnants of the youngest Neotethyan Ocean, magmatism along this zone would be situated within the forearc region and triggered by ridge subduction; (2) if the Sava Zone delimits a diffuse tectonic boundary between Adria and Europe which had already collided in the Late Jurassic, the Klepa basalts together with a number of other magmatic centres represent volcanism related to transtensional tectonics.     

Modeling Urban Land Use Changes Using Support Vector Machines

Support Vector Machines (SVM) is a machine learning (ML) algorithm commonly applied to the classification of remotely sensing data and more recently for modeling land use changes. However, in most geospatial applications the current literature does not elaborate on specifications of the SVM method with respect to data sampling, attribute selection and optimal parameters choices. Therefore the main objective of this study is to present and investigate the SVM technique for modeling urban land use change. The SVM model building procedure is presented together with the detailed evaluation of the output results with respect to the choice of datasets, attributes and the change of SVM parameters. Geospatial datasets containing nine land use classes and spatial attributes for the Municipality of Zemun, Republic of Serbia were used for years 2001, 2003, 2007 and 2011. The Correlation‐based Feature Subset method, kappa coefficient, Area Under Receiver Operating Characteristic Curve (AUC) and kappa simulation were used to perform the model evaluation and compare the model outputs with the real land use datasets. The obtained results indicate that the SVM‐based models perform better when implementing balanced data sampling, reduced data sets to informative subsets of attributes and properly identify the optimal learning parameters.