Substructural first‐ and second‐order model identification for structural damage assessment

This paper presents two methods to perform system identification at the substructural level, taking advantage of reduction in the number of unknowns and degrees of freedom (DOFs) involved, for damage assessment of fairly large structures. The first method is based on first‐order state space formulation of the substructure where the eigensystem realization algorithm (ERA) and the observer/Kalman filter identification (OKID) are used. Identification at the global level is then performed to obtain the second‐order model parameters. In the second method, identification is performed at the substructural level in both the first‐ and second‐order model identification. Both methods are illustrated using numerical simulation studies where results indicate their significantly better performance than identification using the global structure, in terms of efficiency and accuracy. A 12‐DOF system and a fairly large structural system with 50 DOFs are used where the effects of noisy data are considered. In addition to numerical simulation studies, laboratory experiments involving an eight‐storey frame model are carried out to illustrate the performance of the proposed method. The identification results presented in terms of the stiffness integrity index show that the proposed methodology is able to locate and quantify damage fairly accurately. Copyright © 2005 John Wiley & Sons, Ltd.     

The short term climatic sensitivity of carbonate and silicate weathering fluxes: Insight from seasonal variations in river chemistry

Large seasonal variations in the dissolved load of the headwater tributaries of the Marsyandi river (Nepal Himalaya) for major cations and ⁸⁷Sr/⁸⁶Sr ratios are interpreted to result from a greater dissolution of carbonate relative to silicate at high runoff. There is up to a 0.003 decrease in strontium isotope ratios and a factor of 3 reduction in the Si(OH)₄/Ca ratio during the monsoon. These variations, in small rivers sampling uniform lithologies, result from a different response of carbonate and silicate mineral dissolution to climatic forcing. Similar trends are observed in compiled literature data, from both Indian and Nepalese Himalayan rivers. Carbonate weathering is more sensitive to monsoonal runoff because of its faster dissolution kinetics. Silicate weathering increases relative to carbonate during the dry season, and may be more predominant in groundwater with longer water-rock interaction times. Despite this kinetic effect, silicate weathering fluxes are dominated by the monsoon flux, when between 50% and 70% of total annual silicate weathering flux occurs.     

Contamination of polychlorinated biphenyls (PCBs) in sediments from Kyeonggi Bay and nearby areas, Korea

To elucidate the characteristic distribution and contamination of polychlorinated biphenyls (PCBs) in sediments, 63 sediments and five benthic organisms from Kyeonggi Bay, Namyang Bay and Lake Shihwa, West coast of Korea, were analysed. Characterization of PCBs distribution in sediments was conducted by correlation between PCBs concentrations and environmental parameters, comparison of contamination level and composition of PCBs homologs between Kanechlor mixture (KC-mix) and sediments. The residues of PCBs in sediments were correlated with total organic carbon (TOC) and particulate organic carbon (POC) contents, not with mud contents and grain size distributions. Elevated concentrations of T-PCBs were found in sediments from Incheon North Harbor (INH) in Kyeonggi Bay. T-PCBs concentrations were decreased with distance increase from inner site of INH. The residues of T-PCBs in sediments from Namyang Bay were either non-detectable or near to detection limit. The contamination by PCBs in sediments from Lake Shihwa was also low. The PCBs congener profiles in INH were similar to those of KC-mix, while those in less contaminated sites showed relatively high percentage of lower chlorinated biphenyls. Sites K18 (580 ng/g or 48 ug/g-OC dry wt) and K19 (330 ng/g or 38 ug/g-OC dry wt) within INH exceeded the sediment quality criteria (SQC) (16 micrograms/g-OC as a KC-mix) derived from equilibrium partitioning (EqP) approach.     

Winners and Losers in Marine Conservation: Fishers' Displacement and Livelihood Benefits from Marine Reserves

Marine reserves can create both benefits and costs to fishers. This article explores the perceptions of fishers in Kenya and Seychelles about displacement, spillover, and overall impacts of local marine reserves on their livelihoods. We test whether these perceptions are different among fishers from different geographic and socioeconomic conditions. Sixty-six percent of fishers had been displaced from marine reserves or coastal development and 90% believed they had caught fishes that spilled over from marine reserves. Poorer fishers in Kenya were both displaced from, and also felt like they benefited from, marine reserves. This highlights how people's experiences with marine reserves, both positive and negative, are affected by a range of social considerations that may not be incorporated in typical evaluations of ecological and economic marine reserve success.     

The Flatness of U.S. States

Does perception match reality when people judge the flatness of large areas, such as U.S. states? The authors conducted a geomorphometric analysis of the contiguous United States, employing publicly available geographic software, Shuttle Radar Topography Mission (SRTM) elevation data, and a new algorithm for measuring flatness. Each 90‐meter cell was categorized as not flat, flat, flatter, or flattest, and each state was measured in terms of percentage flat, flatter, and flattest as well as absolute area in each category. Ultimately, forty‐eight states plus the District of Columbia were mapped and ranked according to these values. Keywords: flatness, U.S. states, slope, Kansas, Florida.     

Observations of Surface Energy Fluxes and Boundary-Layer Structure Over Heron Reef, Great Barrier Reef, Australia

Over warm, shallow coral reefs the surface radiation and energy fluxes differ from those of the open ocean and result in modification to the marine atmospheric boundary layer via the development of convective internal boundary layers. The complex interrelationships between the surface energy balance and boundary-layer characteristics influence local weather (wind, temperature, humidity) and hydrodynamics (water temperature and currents), as well as larger scale processes, including cloud field properties and precipitation. The nature of these inter-relationships has not been accurately described for coral reef environments. This study presents the first measurements of the surface energy balance, radiation budget and boundary layer thermodynamics made over a coral reef using an eddy-covariance system and radiosonde aerological profiling of the lower atmosphere. Results show that changes in surface properties and the associated energetics across the ocean-reef boundary resulted in modification to the marine atmospheric boundary layer during the Austral winter and summer. Internal convective boundary layers developed within the marine atmospheric boundary layer over the reef and were found to be deeper in the summer, yet more unstable during the winter when cold and drier flow from the mainland enhances heat and moisture fluxes to the atmosphere. A mixed layer was identified in the marine atmospheric boundary layer varying from 375 to 1,200 m above the surface, and was deeper during the summer, particularly under stable anticyclonic conditions. Significant cloud cover and at times rain resulted in the development of a stable stratified atmosphere over the reef. Our findings show that, for Heron Reef, a lagoonal platform reef, there was a horizontal discontinuity in surface energy fluxes across the ocean-reef boundary, which modified the marine atmospheric boundary layer.     

Early Mesoproterozoic evolution of midcontinental Laurentia: Defining the geon 14 Baraboo orogeny

New geochronologic data from midcontinental Laurentia demonstrate that emplacement of the 1476-1470 Ma Wolf River granitic batholith was not an isolated igneous event,but was accompanied by regional metamorphism,deformation,and sedimentation.Evidence for such metamorphism and deformation is best seen in siliciclastic sedimentary rocks of the Baraboo Interval,which were deposited closely following the1.65-1.63 Ga Mazatzal orogeny.In Baraboo Interval strata,muscovite parallel to slatey cleavage,in hydrothermal veins,in quartzite breccia,and in metamorphosed paleosol yielded ~(40)Ar/~(39)Ar plateau age s of 1493-1465 Ma.In addition,U-Th-total Pb dating of neoblastic overgrowths on detrital monazite gave an age of 1488±20 Ma,and recrystallized hematite in folded metapelite gave a mean U/Th-He age of 1411± 39 Ma.Post-Baraboo,arkosic polymictic conglomerate,which contains detrital zircon with a minimum peak age of 1493 Ma,was intruded by a 1470 Ma granite porphyry at the northeastern margin of the Wolf River batholith.This episode of magmatism,regional deformation and metamorphism,and sedimentation,which is designated herein as the Baraboo orogeny,provides a midcontinental link between the Picuris orogeny to the southwe st and the Pinware orogeny to the northeast,completing the extent of early Mesoproterozoic(Calymmian) orogenesis for 5000 km along the southern margin of Laurentia.This transcontinental orogen is unique among Precambrian orogenies for its great width(～1600 km),the predominance of ferroan granites derived from partial melting of lower continental crust,and the prevalence of re gional high T-P metamorphism related to advective heating by granitic magmas emplaced in the middle to upper crust.     

Electron-microprobe dating of monazites from Western Carpathian basement granitoids: plutonic evidence for an important Permian rifting event subsequent to Variscan crustal anatexis

Accessory monazites from 35 granitoid samples from the Western Carpathian basement have been analysed with the electron microprobe in an attempt to broadly constrain their formation ages, on the basis of their Th, U and Pb contents. The sample set includes representative granite types from the Tatric, Veporic and Gemeric tectonic units. In most cases Lower Carboniferous (Variscan) ages have been obtained. However, a much younger mid-Permian age has been recorded for the specialised S-type granites of the Gemeric Unit, and several small A- and S-type granite bodies in the Veporic Unit and the southern Tatric Unit. This distinct Permian plutonic activity in the southern part of the Western Carpathians is an important, although previously little considered geological feature. It appears to be not related to the Variscan orogeny and is interpreted here to reflect the onset of the Alpine orogenic cycle, with magma generation in response to continental rifting. The voluminous Carboniferous granitoid bodies in the Tatric and Veporic units comprise S- and I-type variants which document crustal anatexis accompanying the collapse of a compressional Variscan orogen sector. The Variscan magmas were most likely produced through the remelting of a subducted Precambrian volcanic arc-type crust which included both igneous and sedimentary reworked volcanic-arc material. Although the 2C errors of the applied dating method are quite large and typically ᆞ-20 Ma for single samples, it would appear from the data that the Variscan S-type granitoids (333-367 Ma) are systematically older than the Variscan I-type granitoids (308-345 Ma). This feature is interpreted in terms of a prograde temperature evolution in the deeper parts of the post-collisional Variscan crust. In accordance with recently published zircon ages, this study shows that the Western Carpathian basement must be viewed as a distinct "eastern" tectonomagmatic province in the Variscan collision zone, where the post-collisional crustal melting processes occurred ~20 Ma earlier than in the central sector (South Bohemian Batholith, Hohe Tauern Batholith).     

FloPy Workflows for Creating Structured and Unstructured MODFLOW Models

FloPy is a Python package for creating, running, and post-processing MODFLOW-based groundwater flow and transport models. FloPy functionality has expanded to support the latest version of MODFLOW (MODFLOW 6) including support for unstructured grids. FloPy can simplify the process required to download MODFLOW-based and other executables for Linux, MacOS, and Windows operating systems. Expanded FloPy capabilities include (1) full support for structured and unstructured spatial discretizations; (2) geoprocessing of spatial features and raster data to develop model input for supported discretization types; (3) the addition of functionality to provide direct access to simulated output data; (4) extension of plotting capabilities to unstructured MODFLOW 6 discretization types; and (5) the ability to export model data to shapefiles, NetCDF, and VTK formats for processing, analysis, and visualization by other software products. Examples of using expanded FloPy capabilities are presented for a hypothetical watershed. An unstructured groundwater flow and transport model, with several advanced stress packages, is presented to demonstrate how FloPy can be used to develop complicated unstructured model datasets from original source data (shapefiles and rasters), post-process model results, and plot simulated results.     

Lake ice simulation using a 3D unstructured grid model

Ocean Dynamics - We develop a single-class ice and snow model embedded inside a 3D hydrodynamic model on unstructured grids and apply it to lake studies using highly variable mesh resolution. The...