A high-resolution TEM-AEM, pH titration, and modeling study of Zn coprecipitation with ferrihydrite

Experiments of Zn²⁺ and Fe³⁺ coprecipitation as a function of pH were conducted in the laboratory at ambient temperature and pressure. X-ray diffraction patterns of the coprecipitates show two broad peaks at 0.149 and 0.258 nm, which is consistent with published patterns for pure 2-line ferrihydrite. Zn²⁺ uptake occurred at pH ≥5 while Fe³⁺ precipitation occurred between pH 3 and 4, although both Zn²⁺ and Fe³⁺ were present in the same solution during the entire range of pH titration. High-resolution transmission electron microscopy shows that the coprecipitates are 2 to 6 nm sized single crystalline particles but aggregated to 50 to 400 nm sized clusters. Analytical electron microscopy indicated that the 5% atomic Zn with respect to Fe was homogeneously distributed. No segregated phases were found in the clusters or at single crystal edges, which is consistent with published extended X-ray absorption fine structure (EXAFS) results at similar Zn/(Zn + Fe) ratios. Hence, occlusion and surface precipitation may be excluded as possible coprecipitation mechanisms. The bulk solution Zn²⁺ sorption edge was fitted to both solid solution and generalized diffuse layer surface complexation models. However, a solid solution model is inconsistent with published EXAFS results that show tetrahedral polydentate Zn²⁺ complexes sharing apices with Fe³⁺octahedra.     

Characteristic analysis—1981: Final program and a possible discovery

The latest or n ewest version of the char acteristic an alysis (NCHARAN)computer program offers the exploration geologist a wide variety of options for integrating regionalized multivariate data. The options include the selection of regional cells for characterizing deposit models, the selection of variables that constitute the models, and the choice of logical combinations of variables that best represent these models. Moreover, the program provides for the display of results which, in turn, makes possible review, reselection, and refinement of a model. Most important, the performance of the above-mentioned steps in an interactive computing mode can result in a timely and meaningful interpretation of the data available to the exploration geologist. The most recent application of characteristic analysis has resulted in the possible discovery of economic sulfide mineralization in the Grong area in central Norway. Exploration data for 27 geophysical, geological, and geochemical variables were used to construct a mineralized and a lithogeochemical model for an area that contained a known massive sulfide deposit. The models were applied to exploration data collected from the Gjersvik area in the Grong mining district and resulted in the identification of two localities of possible mineralization. Detailed field examination revealed the presence of a sulfide vein system and a partially inverted stratigraphic sequence indicating the possible presence of a massive sulfide deposit at depth.     

Geochemistry and petrogenesis of the Proterozoic dykes in Tamil nadu, southern India: another example of the Archaean lithospheric mantle source

Approximately 1650-Ma-old NW/SE and NE/SW-trending dolerite dykes in the Tiruvannamalai (TNM) area and approximately 1800-Ma-old NW/SE-trending dolerite dykes in the Dharmapuri (DP) area constitute major Proterozoic dyke swarms in the high-grade granulite region of Tamil nadu, southern India. The NW- and NE-trending TNM dykes are compositionally very similar and can be regarded as having been formed during a single magmatic episode. The DP dykes may relate to an earlier similar magmatic episode. The dolerites are Fe-rich tholeiites and most of the elemental variations can be explained in terms of fractional crystallisation. Clinopyroxene and olivine are the inferred ferromagnesian fractionation phases followed by plagioclase during the late fractionation stages. All the studied dykes have, similar to many continental flood basalts (CFB), large-ion lithophile element (LILE) and light rare-earth element (LREE) enrichment and Nb and Ta depletion. The incompatible element abundance patterns are comparable to the patterns of many other Proterozoic dykes in India and Antarctica, to the late Archaean (～2.72 Ga) Dominion volcanics in South Africa and to the early Proterozoic (～2.0 Ga) Scourie dykes of Scotland. The geochemical characteristics of the TNM and DP dykes cannot be explained by crustal contamination alone. Instead, they are consistent with derivation from an enriched lithospheric mantle source which appears to have been developed much earlier than the dyke intrusions during a major crustal building event in the Archaean. The dyke magmas may have been formed by dehydration melting induced by decompression and lithospheric attenuation or plume impingement at the base of the lithosphere. These magmas, compared with CFB, appear to be the minor partial melts from plume heads of smaller diameter and of shallow origin (650 km). Therefore, the Proterozoic thermal events could induce crustal attenuation and dyke intrusions in contrast to the extensive CFB volcanism and continental rifting generally associated with the Phanerozoic plumes of larger head diameter (>1000 km) and of deeper origin (at crust mantle boundary).     

Correlation between petrography,NAA, and ICP analyses: Application to early bronze Egyptian pottery from Canaan

Under favorable circumstances petrographic studies supported by chemical analysis using inductively coupled plasma (ICP) suffice to establish the provenience of pottery. A case in point is Egyptian-style pottery of Early Bronze Age found in Canaan. The pottery was divided into three groups according to four criteria determined by thin section analysis supplemented by X-ray diffraction: sorting and volume of silt-sized quartz, heavy minerals, the amount of carbonates in the matrix, and the firing temperature. Chemical analyses confirmed the classification. The source materials inferred for the three groups are Nile muds, Egyptian marly sediments, and local loess. Although the chemical analyses obtained by ICP and neutron activation analysis (NAA) were compatible, the existing database for NAA cannot be used indiscriminately. However, for provenience studies based on mineralogical and petrographic data, knowledge of the geology of the potential source areas can replace an extensive database.     

Geochemical and mineralogical evidence for Sahara and Sahel dust additions to Quaternary soils on Lanzarote,eastern Canary Islands,Spain

Africa is the most important source of dust in the world today, and dust storms are frequent on the nearby Canary Islands. Previous workers have inferred that the Sahara is the most important source of dust to Canary Islands soils, with little contribution from the Sahel region. Soils overlying a late Quaternary basalt flow on Lanzarote, Canary Islands, contain, in addition to volcanic minerals, quartz and mica, exotic to the island’s bedrock. Kaolinite in the soils also likely has an exotic origin. Trace‐element geochemistry shows that the soils are derived from varying proportions of locally derived basalt and African dust. Major‐element geochemistry, clay mineralogy and interpretation of satellite imagery suggest that dust additions to the Canary Islands come not only from the Sahara Desert, but also from the Sahel region.     

A coupling of mixed and discontinuous Galerkin finite-element methods for poroelasticity

In this paper, we formulate a finite-element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. We approximate the flow variables by a mixed finite-element space and the displacement by a family of discontinuous Galerkin methods. Theoretical convergence error estimates are derived and, in particular, are shown to be independent of the constrained specific storage coefficient, c _o . This suggests that our proposed algorithm is a potentially effective way to combat locking, or the nonphysical pressure oscillations, which sometimes arise in numerical algorithms for poroelasticity.     

Origin and evolution of the Steamboat Springs siliceous sinter deposit, Nevada, U.S.A.

Siliceous hot spring deposits from Steamboat Springs, Nevada, U.S.A., record a complex interplay of multiple, changing, primary environmental conditions, fluid overprinting and diagenesis. Consequently these deposits reflect dynamic geologic and geothermal processes. Two surface sinters were examined—the high terrace, and the distal apron-slope, as well as 13.11 m (43 ft) of core material from drill hole SNLG 87-29. The high terrace sinter consists of vitreous and massive-mottled silica horizons, while the distal deposit and core comprise dominantly porous, indurated fragmental sinters. Collectively, the three sinter deposits archive a complete sequence of silica phase diagenetic minerals from opal-A to quartz. X-ray powder diffraction analyses and infrared spectroscopy of the sinters indicate that the distal apron-slope consists of opal-A and opal-A/CT mineralogy; the core yielded opal-A/CT and opal-CT with minor opal-A; and the high terrace constitutes opal-C, moganite, and quartz. Mineralogical maturation of the deposit produced alternating nano–micro–nano-sized silica particle changes. Based on filament diameters of microbial fossils preserved within the sinter, discharging thermal outflows fluctuated between low-temperatures (< 35 °C, coarse filaments) and mid-temperatures ( 35–60 °C, fine filaments). Despite transformation to quartz, primary coarse and fine filaments were preserved in the high terrace sinter. AMS ¹⁴C dating of pollen from three horizons within core SNLG 87-29, from depths of 8.13 to 8.21 m (26′8″ to 26′11″), 10.13 to 10.21 m (33′3″ to 33′6″), and 14.81 to 14.88 m (48′7″ to 48′10″), yielded dates of 8684 ± 64 years, 11,493 ± 70 years and 6283 ±60 years, respectively. In the upper section of the core, the stratigraphically out-of-sequence age likely reflects physical mixing of younger sinter with quartzose sinter fragments derived from the high terrace. Within single horizons, mineralogical and morphological components of the sinter matrix were spatially patchy. Overall, the deposit was modified by sub-surface flow of alkali-chloride thermal fluids depositing a second generation of silica, and periodically, by acidic steam condensate formed during periods when the water table was low. Local faulting produced considerable fracturing of the sinter. Hence, the Steamboat Springs sinter experienced a complex history of primary and secondary hydrothermal, geologic and diagenetic events, and their inter-relationships and effects are locked within the physical, chemical and biological signatures of the deposit.     

Basement-controlled faulting of Paleozoic strata in southern Ontario, Canada: new evidence from geophysical lineament mapping

Basement fault reactivation is now recognized as an important control on sedimentation and fault propagation in intracratonic basins. In southern Ontario, the basement consists of complexly structured mid-Proterozoic (ca. 1.2 Ga) crystalline rocks and metasedimentary rocks that are overlain by up to 1500 m of Paleozoic sedimentary strata. Reactivation of basement structures is suspected to control the location of Paleozoic fault and fracture systems, but evaluation has been hindered by a limited understanding of the regional structural characteristics of the buried basement. New aeromagnetic- and gravimetric-lineament mapping presented in this paper better resolves the location of basement discontinuities and provides further evidence for basement controls on the distribution of Paleozoic fault and fracture systems. Lineament mapping was facilitated by reprocessing and digital image enhancement (micro-levelling, regional residual separation, derivative filtering) of existing regional gravity and aeromagnetic datasets. Reprocessed images identify new details of the structural fabric of the basement below southern Ontario and delineate several previously unrecognized aeromagnetic and gravity lineaments and linear zones. Linear zones parallel the projected trends of mid-Proterozoic terrane boundaries identified by field mapping on the exposed shield to the north of the study area, and are interpreted as zones of shearing and basement faulting. Mapped aeromagnetic and gravity lineaments show similar trends to Paleozoic faults and fracture networks and broad zones of seismicity in southern Ontario. These new data support an ‘inheritance model’ for Paleozoic faulting, involving repeated reactivation and upward propagation of basement faults and fractures into overlying cover strata.     

A coupling of mixed and continuous Galerkin finite element methods for poroelasticity I: the continuous in time case

In this paper, we formulate a finite element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. Here, we approximate the pressure by a mixed finite element method and the displacements by a Galerkin method. Theoretical convergence error estimates are derived in a continuous in-time setting for a strictly positive constrained specific storage coefficient. Of particular interest is the case when the lowest-order Raviart–Thomas approximating space or cell-centered finite differences are used in the mixed formulation, and continuous piecewise linear approximations are used for displacements. This approach appears to be the one most frequently applied to existing reservoir engineering simulators.     

Landscape and prehistoric chronology of West-Central Jordan

Remnant lake and stream terraces of the Wadi el Hasa (west-central Jordan) are associated with in situ prehistoric sites spanning > 100,000 years. Eighteen radiocarbon dates from cultural and geological deposits on the terraces facilitate the first comprehensive prehistoric landscape chronology for the southern Levant east of the Jordan Rift. In the eastern Hasa basin, the uppermost of three cut and fill surfaces (>20 m) is linked to massive fossil spring deposits and an early Middle Paleolithic occupation (100,000–70,000 B. P.), suggestive of considerably wetter climates. A later Middle Paleolithic occupation may be synchronous with the emergence of Pleistocene Lake Hasa (ca. 70,000 B. P.). Peak lake levels were attained 40,000 years ago. Dates proliferate after 25,000 B. P. and register recession of Lake Hasa (ca. 20,000 B. P.), an intervening erosional phase, and the initiation of complex humid-desiccation cycles for the terminal Pleistocene—Holocene (17,000–9,000 B. P.). The contemporary Wadi el Hasa channel began aggrading its floodplain after 8000 B. P. and was incised to its present depths 1000–500 years ago. The prehistoric landscape history of the Hasa drainage is broadly synchronous with sequences in the Rift Valley and Negev desert and offers baseline chronologies for the Late Quaternary of eastern Jordan and the Arabian peninsula. © 1994 John Wiley & Sons, Inc.