Subsidence and thermal history of an inverted Late Jurassic‐Early Cretaceous extensional basin (Cameros,North‐central Spain) affected by very low‐ to low‐grade metamorphism

The Cameros Basin (North Spain) is a Late Jurassic‐Early Cretaceous extensional basin, which was inverted during the Cenozoic. It underwent a remarkable thermal evolution, as indicated by the record of anomalous high temperatures in its deposits. In this study, the subsidence and thermal history of the basin is reconstructed, using subsidence analysis and 2D thermal modelling. Tectonic subsidence curves provide evidence of the occurrence of two rapid subsidence phases during the syn‐extensional stage. In the first phase (Tithonian‐Early Berriasian), the largest accommodation space was formed in the central sector of the basin, whereas in the second (Early Barremian‐Early Albian), it was formed in the northern sector. These rapid subsidence phases could correspond to relevant tectonic events affecting the Iberian Plate at that time. By distinguishing between the initial and thermal subsidence and defining their relative magnitudes, Royden's (1986) method was used to estimate the heat flow at the end of the extensional stage. A maximum heat flow of 60–65 mW/m² is estimated, implying only a minor thermal disturbance associated with extension. In contrast with these data, very high vitrinite reflectance, anomalously distributed in some case with respect to the typical depth‐vitrinite reflectance relation, was measured in the central‐northern sector of the basin. Burial and thermal data are used to construct a 2D thermal basin model, to elucidate the role of the processes involved in sediment heating. Calibration of the thermal model with the vitrinite reflectance (%Ro) and fluid inclusion (FI) data indicates that in the central and northern sectors of the basin, an extra heat source, other than a typical rift, is required to explain the observed thermal anomalies. The distribution of the %Ro and FI values in these sectors suggests that the high temperatures and their distribution are related to the circulation of hot fluids. Hot fluids were attributed to the hydrothermal metamorphic events affecting the area during the early post‐extensional and inversion stages of the basin.     

Effect of asymmetrical street canyons on pedestrian thermal comfort in warm-humid climate of Cuba

Walkability and livability in cities can be enhanced by creating comfortable environments in the streets. The profile of an urban street canyon has a substantial impact on outdoor thermal conditions at pedestrian level. This paper deals with the effect of asymmetrical street canyon profiles, common in the historical centre of Camagüey, Cuba, on outdoor thermal comfort. Temporal-spatial analyses are conducted using the Heliodon2 and the RayMan model, which enable the generation of accurate predictions about solar radiation and thermal conditions of urban spaces, respectively. On these models, urban settings are represented by asymmetrical street canyons with five different height-to-width ratios and four street axis orientations (N-S, NE-SW, E-W, SE-NW). Results are evaluated for daytime hours across the street canyon, by means of the physiologically equivalent temperature (PET index) which allows the evaluation of the bioclimatic conditions of outdoor environments. Our findings revealed that high profiles (façades) located on the east-facing side of N-S streets, on the southeast-facing side of NE-SW streets, on the south-facing side of E-W street, and on the southwest-facing side of SE-NW streets, are recommended to reduce the total number of hours under thermal stress. E-W street canyons are the most thermally stressed ones, with extreme PET values around 36 °C. Deviating from this orientation ameliorates the heat stress with reductions of up to 4 h in summer. For all analysed E-W orientations, only about one fifth of the street can be comfortable, especially for high aspect ratios (H/W > 3). Optimal subzones in the street are next to the north side of the E-W street, northwest side of the NE-SW street, and southwest side of the SE-NW street. Besides, when the highest profile is located on the east side of N-S streets, then the subzone next to the east-facing façade is recommendable for pedestrians. The proposed urban guidelines enable urban planners to create and renovate urban spaces which are more efficient in diminishing pedestrian thermal stress.     

Changes in heat wave characteristics over Extremadura (SW Spain)

Theoretical and Applied Climatology - Heat wave (HW) events are becoming more frequent, and they have important consequences because of the negative effects they can have not only on the human...     

Evaluation of methods of spatial interpolation for monthly rainfall data over the state of Rio de Janeiro,Brazil

Five deterministic methods of spatial interpolation of monthly rainfall were compared over the state of Rio de Janeiro, southeast Brazil. The methods were the inverse distance weight (IDW), nearest neighbor (NRN), triangulation with linear interpolation (TLI), natural neighbor (NN), and spline tension (SPT). A set of 110 weather stations was used to test the methods. The selection of stations had two criteria: time series longer than 20 years and period of data from 1960 to 2009. The methods were evaluated using cross-validation, linear regression between values observed and interpolated, root mean square error (RMSE), coefficient of determination (r ²), coefficient of variation (CV, %), and the Willmott index of agreement (d). The results from different methods are influenced by the meteorological systems and their seasonality, as well as by the interaction with the topography. The methods presented higher precision (r ²) and accuracy (d, RMSE) during the summer and transition to autumn, in comparison with the winter or spring months. The SPT had the highest precision and accuracy in relation to other methods, in addition to having a good representation of the spatial patterns expected for rainfall over the complex terrain of the state and its high spatial variability.     

Estimation of Surface-Layer Scaling Parameters in the Unstable Boundary Layer: Implications for Orographic Flow Speed-Up

A method is proposed for estimating the surface-layer depth \((z_s)\) and the friction velocity \((u_*)\) as a function of stability (here quantified by the Obukhov length, L) over the complete range of unstable flow regimes. This method extends that developed previously for stable conditions by Argaín et al. (Boundary-Layer Meteorol 130:15–28, 2009), but uses a qualitatively different approach. The method is specifically used to calculate the fractional speed-up \((\varDelta S)\) in flow over a ridge, although it is suitable for more general boundary-layer applications. The behaviour of \(z_s \left( L\right) \) and \(u_*\left( L\right) \) as a function of L is indirectly assessed via calculation of \(\varDelta S\left( L\right) \) using the linear model of Hunt et al. (Q J R Meteorol Soc 29:16–26, 1988) and its comparison with the field measurements reported in Coppin et al. (Boundary-Layer Meteorol 69:173–199, 1994) and with numerical simulations carried out using a non-linear numerical model, FLEX. The behaviour of \(\varDelta S\) estimated from the linear model is clearly improved when \(u_*\) is calculated using the method proposed here, confirming the importance of accounting for the dependences of \(z_s\left( L \right) \) and \(u_*\left( L \right) \) on L to better represent processes in the unstable boundary layer.     

The impacts of a plume-rise scheme on earth system modeling: climatological effects of biomass aerosols on the surface temperature and energy budget of South America

Theoretical and Applied Climatology - Seasonal forest fires in the Amazon are the largest source of pollutants in South America. The impacts of aerosols due to biomass burning on the temperature...     

The influence of elevation on soil properties and forest litter in the Siliceous Moncayo Massif,SW Europe

Understanding the effects of elevation and related factors (climate, vegetation) on the physical and chemical soil properties can help to predict changes in response to future climate or afforestation forcings. This work aims to contribute to the knowledge of soil evolution and the classification of forest soils in relation to elevation in the montane stage, with special attention to podzolization and humus forms. The northern flank of the Moncayo Massif (Iberian Range, SW Europe) provides a unique opportunity to study a forest soils catena within a consistent quartzitic parent material over a relatively steep elevation gradient. With increasing elevation, pH, base saturation, exchangeable potassium, and fine silt-sized particles decrease significantly, while organic matter, the C/N ratio, soil aggregate stability, water repellency and coarse sand-sized particles increase significantly. The soil profiles shared a set of properties in all horizons: loamy-skeletal particle-size, extreme acidity (pH-H₂O<5.6) and low base saturation (<50%). The most prevalent soil forming processes in the catena include topsoil organic matter accumulation and even podzolization, which increases with elevation. From the upper to lower landscape positions of wooded montane stage of the Moncayo Massif, mull-moder-mor humus and an Umbrisol-Cambisol-Podzol soil unit sequences were found.     

A Probabilistic Approach for Identifying Independent Remote Compressions in an Intraplate Region: The Iberian Chain (Spain)

The discrimination between distinct remote compressions and multiple local stress deviations within a single compressive stress field has been carried out in the central-eastern Iberian Chain, by using structural criteria, computing palaeostress directions, identifying and ‘filtering’ stress deviations, and analysing time relationships. A probabilistic analysis based on a systematic comparison of real and expected frequencies of coexistence of two compressions is applied by means of the χ ² Test. This allows us to identify those tectonic compressions that behave as independent events from the probabilistic point of view. The results suggest that among five initially defined compression directions only three can be considered as representative of distinct (although partially superposed) externally applied intraplate stress fields: Iberian s.l. (NE-SW), Betic s.l. (NW-SE), and Pyrenean (N-S to NNE-SSW).     

Palaeokarst and rauhwacke development,mountain uplift and subaerial sliding of tectonic sheets (northern Sierra de los Filabres,Betic Cordilleras,Spain)

The rauhwackes near Serón in the northern Sierra de los Filabres (S Spain), previously considered as true tectonic breccias, are reinterpreted on the basis of sedimentological, geomorphological and geometrical evidence as subaerial or nearly subaerial sedimentary deposits. Channel fills, parallel lamination, cross-lamination, graded bedding, sedimentary clastic dykes and other sedimentary structures and features occur in the rauhwacke body. These sedimentary rocks correspond to continental deposits of alluvial and karstic origin deposited over a karstified erosional surface of Nevado–Filabride marbles. Although no fossils have been found in the rauhwackes, a Tortonian age for these rocks is suggested on the basis of structural arguments and lithostratigraphic data from the nearby Almanzora basin. The rauhwackes were buried by slabs of Alpujarride rocks that gravitationally slid over them during the uplifting of the Sierra de los Filabres.     

Numerical modeling of storm surges in the coast of Mozambique: the cases of tropical cyclones Bonita (1996) and Lisette (1997)

The coast of Mozambique is often affected by storms, particularly tropical cyclones during summer or sometimes midlatitude systems in the southern part. Storm surges combined with high freshwater discharge can drive huge coastal floods, affecting both urban and rural areas. To improve the knowledge about the impact of storm surges in the coast of Mozambique, this study presents the first attempt to model this phenomenon through the implementation of the Princeton Ocean Model (POM) in the Southwestern Indian Ocean domain (SWIO; 2–32°S, 28–85°E) using a regular grid with 1/6° of spatial resolution and 36 sigma levels. The simulation was performed for the period 1979–2010, and the most interesting events of surges were related to tropical cyclones Bonita (1996) and Lisette (1997) that occurred in the Mozambique Channel. The results showed that the model represented well the amplitude and phase of principal lunar and solar tidal constituents, as well as it captured the spatial pattern and magnitudes of SST with slight positive bias in summer and negative bias in winter months. In terms of SSH, the model underestimated the presence of mesoscale eddies, mainly in the Mozambique Channel. Our results also showed that the atmospheric sea level pressure had a significant contribution to storm heights during the landfall of the tropical cyclones Bonita (1996) and Lisette (1997) in the coast of Mozambique contributing with about 20 and 16% of the total surge height for each case, respectively, surpassing the contribution of the tide-surge nonlinear interactions by a factor of 2.