On the structure of Saturn's rings and the ‘real’ rotational period for the planet

An analysis of the Lowell Observatory photographic plates of Saturn gave the following results: (1) ring A and B show peculiar brightness distributions around the planet, from which we conclude that both are composed of particles in synchronous rotation. (2) The leading side of the particles in ring A is brighter than the trailing side by about 4%, which may indicate an interaction between such particles and the interplanetary medium. (3) Scans of the rings across the major axis show a small (～0.3″) region of enhanced brightness, from which we derive a value ofT _s =10^h13 _. ^m 8±5 _. ^m 4 for the actual planetary rotational period of Saturn. (4) In order to explain the synchronous rotation, the particles in ring A have to be at least 42 m in diameter.     

Tectonically driven fluid flow and associated low-grade metamorphism during the Alpine compression in the eastern Iberian Chain (Spain)

Fluid inclusions and clay mineralogy of the Permo-Triassic rocks from the Espina and Espadà Ranges (SE Iberian Chain, Spain) have been investigated to establish their relationship with hydrothermal fluid circulation during the Alpine Orogeny. Primary fluid inclusions in quartz-filled tension gashes in Permo-Triassic sandstones reveal maximum temperatures around 230 °C and very constant salinities of 8.5% wt. eq. NaCl. Secondary fluid inclusions found in quartz from the Santonian Ba–Cu–Hg deposits show similar compositional and thermodynamic characteristics, denoting an Alpine recrystallization. Clay mineral composition of Permo-Triassic mudrocks is characterized by pyrophyillite, indicating low-grade metamorphic conditions. Field observations and experimental data suggest that the crystallization of quartz in tension gashes, the formation of secondary fluid inclusions and the development of the metamorphism are contemporaneous and related to fluid circulation during the Alpine compression. Fluid flow took place along the Hercynian fault system that was reactivated during the Mesozoic rift stage and inverted during the Alpine deformation.     

Fe and Mn in calcites cementing red beds: A record of oxidation–reduction conditions: Examples from the Catalan Coastal Ranges (NE Spain)

Fe and Mn occur in calcite cements depending on the oxidizing–reducing conditions of cementing waters, which may change according to depositional and diagenetic environments. In red beds, Mn and Fe are available from the ferruginous matrix. Thus, it is possible to know the oxidizing–reducing conditions of fluids that precipitated calcite as a function of Mn and Fe content in calcite cement. A detailed petrological (with special attention to cathodoluminescence) and geochemical analysis of these cements is a useful tool to constrain the diagenetic evolution of red beds and the history of the basin where they deposited.     

HP–LT Variscan metamorphism in the Cubito-Moura schists (Ossa-Morena Zone, southern Iberia)

Multi-equilibrium thermobarometry shows that low-grade metapelites (Cubito-Moura schists) from the Ossa–Morena Zone underwent HP–LT metamorphism from 340–370 °C at 1.0–0.9 GPa to 400–450 °C at 0.8–0.7 GPa. These HP–LT equilibriums were reached by parageneses including white K mica, chlorite and chloritoid, which define the earliest schistosity (S₁) in these rocks. The main foliation in the schists is a crenulation cleavage (S₂), which developed during decompression from 0.8–0.7 to 0.4–0.3 GPa at increasing temperatures from 400–450 °C to 440–465 °C. Fe³⁺ in chlorite decreased greatly during prograde metamorphism from molar fractions of 0.4 determined in syn-S₁ chlorites down to 0.1 in syn-S₂ chlorites. These new data add to previous findings of eclogites in the Moura schists indicating that a pile of allochtonous rocks situated next to the Beja-Acebuches oceanic amphibolites underwent HP–LT metamorphism during the Variscan orogeny. To cite this article: G. Booth-Rea et al., C. R. Geoscience 338 (2006).     

Évolution de l'onde semi-diurne M2 de la marée à Brest de 1846 à 2005

The work of searching, recovering and quality control of ancient sea-level measurements at Brest is presented. This work enables us to complete a study carried out by Cartwright in 1972, which showed a decrease in the tidal M2 semi-diurnal amplitude of 1% per century. After including these ancient data, as well as the last four decades of observations in the analysis, our results show an increase of the amplitude of M2 after 1960 and a decrease before 1880, suggesting a long-period oscillation rather than a steady secular trend. To cite this article: N. Pouvreau et al., C. R. Geoscience 338 (2006).     

Study of geothermal water intrusion due to groundwater exploitation in the Puebla Valley aquifer system, Mexico

Significant intrusion of geothermal water into fresh groundwater takes place in the Puebla Valley aquifer system, Mexico. The decline in the potentiometric surface due to the overexploitation of the groundwater induces this intrusion. This hydrological system comprises three aquifers located in Plio-Quaternary volcanic sediments and Mesozoic calcareous rocks. The hydraulic balance of the aquifer shows that the annual output exceeds the natural inputs by 12 million m³. Between 1973 and 2002, a drop in the potentiometric surface, with an 80 m cone of depression, was identified in a 5-km-wide area located southwest of the city of Puebla. Chemical analyses performed on water samples since 1990 have shown an increase in total dissolved solids (TDS) of more than 500 mg/L, coinciding with the region showing a cone of depression in the potentiometric surface. A three-dimensional flow and transport model, based on the hydrogeological and geophysical studies, was computed by using the MODFLOW and MT3D software. This model reproduces the evolution of the aquifer system during the last 30 years and predicts for 2010 an additional drawdown in the potentiometric surface of 15 m, and an increase in the geothermal water intrusion.     

A Practical Procedure for the Measurement of Fragmentation by Blasting by Image Analysis

Summary. The operation of a digital image analysis system in a limestone quarry is described. The calibration of the system, required in order to obtain moderately reliable fragmentation values, is done from muckpile sieving data by tuning the image analysis software settings so that the fragmentation curve obtained matches as close as possible the sieving. The sieving data have also been used to extend the fragment size distribution curves measured to sizes below the system’s optical resolution and to process the results in terms of fragmented rock, discounting the material coming from a loose overburden (natural fines) that is cast together with the fragmented rock. Automatic and manual operation modes of the image analysis are compared. The total fragmentation of a blast is obtained from the analysis of twenty photographs; a criterion for the elimination of outlier photographs has been adopted using a robust statistic. The limitations of the measurement system due to sampling, image processing and fines corrections are discussed and the errors estimated whenever possible. An analysis of consistency of the results based on the known amount of natural fines is made. Blasts with large differences in the amount of fines require a differentiated treatment, as the fine sizes tend to be the more underestimated in the image analysis as they become more abundant; this has been accomplished by means of a variable fines adjustment factor. Despite of the unavoidable errors and the large dispersion always associated with large-scale rock blasting data, the system is sensitive to relative changes in fragmentation.     

Reconstructing hydrological variability from testate amoebae analysis in Carpathian peatlands

Peatlands offer the potential for high resolution records of water balance over Holocene timescales, yet this potential is under-exploited in many areas of the world. Within Europe, peatlands are mostly confined to areas north of 55° N, but several areas of southern and eastern Europe contain small peatlands which may be suitable for palaeoclimatic reconstruction. In this paper we test the potential of peatlands in the Carpathian region for deriving quantified estimates of water table changes using testate amoebae analysis. A training set for palaeohydrological reconstruction from testate amoebae assemblages was obtained by collecting surface samples from 13 peatlands, including 9 from Hungary and 4 from Transylvania (Romania). Using a simple measure of mean annual water tables estimated from staining of PVC tape, we found that some peatlands were heavily influenced by runoff and groundwater, and were therefore not suitable as modern analogues of ombrotrophic climatically sensitive sites. The relationship between the testate amoebae assemblages in the modern samples and the environmental variables was explored using CCA. The CCA biplot showed that the most important variables are depth to water table and moisture content, confirming that hydrology is a key control on taxon distribution. pH was a secondary gradient. A transfer function for % moisture and depth to water table was established and applied to fossil assemblages from a sequence from Fenyves-tető, Transylvania, Romania. The reconstructed water table shows a number of variations which have parallels with other palaeoclimatic records from Europe and the North Atlantic prominent phases of higher water tables are associated with the periods 8000–8300 cal BP, 3000–2500 cal BP and after 600 cal BP. We suggest that these were periods of particular intensification of westerly airflow which affected eastern Europe as well as western and central Europe.     

Interpretation of subhorizontal crustal reflections by metamorphic and rheologic effects in the eastern part of the Pannonian Basin

The geologic origin of subhorizontal reflections, often observed in crustal seismic sections, was investigated by establishing metamorphic facies and strength of rocks in depth, and correlating these properties to seismic reflection sections from eastern Hungary. Estimation of the depths of metamorphic mineral stability zones utilized the principles developed by Fyfe et al. and known geothermal data of the area. The strength versus depth profile was derived by relating local seismic P -wave interval velocities to Meissner et al. 's activation energy. The results show that the series of subhorizontal reflections, observed in the Pannonian Basin, are a consequence of combined metamorphic and rheologic changes in depths. The synthesis of the integrated data set suggests that the retrograde alteration of the pre-Tertiary basement above the percolation threshold was made possible by the softening effect of shear zones and their water-conducting capacity. The subhorizontal reflections of highest energy, of the consolidated crust below the percolation threshold, originate in the depths of greenschist, amphibolite and granulite metamorphic mineral facies, which were formed in geothermal and pressure conditions similar to those existing today. These results imply the overprint of earlier (Variscan) metamorphic sequences of the crust by more recent retrograde metamorphic processes.