Evaluating functional connectivity in a small agricultural catchment under contrasting flood events by using UAV

Concentrated erosion, a major feature of land degradation, represents a serious problem for soil and water resources management and a threat to ecosystems. Understanding the internal mechanisms (de-)coupling sediment pathways can improve the management and resilience of catchments. In this study, concentrated erosion and deposition forms were mapped accurately through field and aerial unmanned aerial vehicle (UAV) campaigns, in order to assess the evolution of connectivity pathways over a series of three contrasted and consecutive flood events occurring between October 2016 and January 2017 (return period ranging from 0.5 to 25 years) in a small Mediterranean agricultural catchment (Can Revull, Mallorca, Spain; 1.4 km²). In addition, a morphometric index of connectivity (IC) was used to identify the potential trajectories of different concentrated erosion forms and deposition areas. IC predictions were calibrated by identifying the optimal critical thresholds, i.e. those most consistent with field observations after each of the events studied. The results found that the index performed well in predicting the occurrence and the length/area of the different type of landforms, giving kappa (κ) coefficients of variation ranging between 0.21 and 0.92 and linear correlations R² between 0.33 and 0.72. The type of landform affected the correspondence of IC predictions and field observations, with lower thresholds the greater the magnitude of their associated geomorphic processes. Rainfall magnitude proved to be a very important factor controlling the development of erosion and deposition landforms, with large differences in length/area between the contrasted events. The evolution of the observed trajectories revealed feedback dynamics between the structural and functional connectivity of the catchment, in which morphological changes determined the spatial distribution of the processes’ activity in the successive events and vice versa. © 2020 John Wiley & Sons, Ltd.     

The contrasted evolution of high and low flows and precipitation indices in the Duero basin (Spain)

Abstract

Trends in high and low flows are valuable indicators of hydrological change because they highlight changes in various parts of the frequency distribution of streamflow series. This enables improved assessment of water availability in regions with high seasonal and inter-annual variability. There has been a substantial reduction in water resources in the Duero basin (Iberian Peninsula, Spain) and other areas of the Mediterranean region during the last 50 years, and this is likely to continue because of climate change. In this study, we investigated the evolution and trends in high and low flows in the Spanish part of the Duero basin, and in equivalent or closely-related precipitation indices for the period 1961–2005. The results showed a general trend of decrease in the frequency and magnitude of high flows throughout most of the basin. Moreover, the number of days with low flows significantly increased over this period. No clear relationship was evident between the evolution of high/low flows and changes in the distribution frequencies of the precipitation series. In contrast to what was expected, the number of days with heavy precipitation and the mean annual precipitation did not show significant trends across the basin, and the number of days without rainfall decreased slightly. The divergence between precipitation and runoff evolution was more accentuated in spring and summer. In the absence of trends in precipitation, it is possible that reforestation processes in the region, and increasing temperatures in recent decades, could be related to the decreasing frequency of high flows and the increasing frequency of low flows.

Editor Z.W. Kundzewicz; Associate editor S. Grimaldi

Citation Morán-Tejeda, E., López-Moreno, J.I., Vicente-Serrano, S.M., Lorenzo-Lacruz, J. and Ceballos-Barbancho, A., 2012. The contrasted evolution of high and low flows and precipitation indices in the Duero basin (Spain). Hydrological Sciences Journal, 57 (4), 591–611.     

Streamflow elasticity,in a context of climate change,in arid Andean watersheds of north-central Chile

ABSTRACT

Based on a future temperature increase of 0.5°C and precipitation decrease of 25%, the climate elasticity of streamflow to precipitation and temperature changes in 12 Andean watersheds of the Coquimbo Region, north-central Chile, was assessed. Also, the possible relationships between this elasticity and specific physiographic characteristics of the watersheds (area, average elevation, slope distribution, terrain roughness, slope orientation, vegetation cover) were studied. Climate elasticity of streamflow ranged between 0 and 2.8. Watersheds presenting higher elevations, with a fairly well-balanced distribution of slope exposure tend to exhibit lower elasticity, which could be explained by the contribution of snowfall to the hydrological regime, more significant in those watersheds. Results should be considered when downscaling climate model projections at the basin scale in mountain settings. Finally, uncertainties in the approach, given by factors such as streamflow seasonality, data availability and representativeness and watershed characteristics, and therefore the scope of the results, are discussed.     

Aftershock seismic assessment taking into account postmainshock residual drifts

This paper introduces and evaluates a methodology for the aftershock seismic assessment of buildings taking explicitly into account residual drift demands after the mainshock (i.e., postmainshock residual interstory drifts, RIDR_o). The methodology is applied to a testbed four‐story steel moment‐resisting building designed with modern seismic design provisions when subjected to a set of near‐fault mainshock–aftershock seismic sequences that induce five levels of RIDR_o. Once the postmainshock residual drift is induced to the building model, a postmainshock incremental dynamic analysis is performed under each aftershock to obtain its collapse capacity and its capacity associated to demolition (i.e., the capacity to reach or exceed a 2% residual drift). The effect of additional sources of stiffness and strength (i.e., interior gravity frames and slab contribution) and the polarity of the aftershocks are examined in this study. Results of this investigation show that the collapse potential under aftershocks strongly depends on the modeling approach (i.e., the aftershock collapse potential is modified when additional sources of lateral stiffness and strength are included in the analytical model). Furthermore, it is demonstrated that the aftershock capacity associated to demolition (i.e., the aftershock collapse capacity associated to a residual interstory drift that leads to an imminent demolition) is lower than that of the aftershock collapse capacity, which mean that this parameter should be a better measure of the building residual capacity against aftershocks. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparative seismic performance of steel frames retrofitted with buckling-restrained braces through the application of Force-Based and Displacement-Based approaches

This paper presents an analytical study aimed at evaluating the feasibility of using buckling-restrained braces as a retrofit scheme for existing multi-bay multi-story steel buildings. For that purpose, the seismic response of four two-dimensional frame models representative of typical steel buildings designed in a region of high seismicity was analyzed prior to and after including buckling-restrained braces as a retrofit strategy. The braces were designed following Force-Based and Displacement-Based approaches. The structural performance of the different versions of the frames was evaluated by subjecting each one to a set of twenty ground motions representative of the design earthquake with 10% exceedance probability in fifty years. It was observed that buckling-restrained braces allow for an efficient reduction in the peak drift demands in the retrofitted frames. However, since the beneficial effect of the braces cannot be fully controlled under a Force-Based design approach, it was concluded that a Displacement-Based design approach is the best option to achieve optimum structural performance.     

An audio-magnetotelluric investigation in Terceira Island (Azores)

Ten audio-magnetotelluric soundings have been carried out along a profile crossing the Serra do Cume caldera in the eastern part of the Terceira Island (Azores). The main objectives of this investigation were to detect geoelectrical features related with tectonic structures and to characterize regional hydrological and hydrothermal aspects mainly those related to geothermal fluid dynamics.Three-dimensional numerical investigation showed that the data acquired at periods shorter than 1 s are not significantly affected by ocean effect. The data was analysed using the Smith's decomposition method in order to investigate possible distortions caused by superficial structures and to estimate a global regional strike. The results suggest that in general the soundings were not distorted. A regional N55°W strike was chosen for the two-dimensional data inversion.The low-resistivity zones (10–30 ohm-m) displayed in the central part of the 2-D geoelectrical model have been interpreted as caused by hydrothermal circulation. The low-resistivity anomalies at the ends of the profile might be attributed to alteration zones with interaction of seawater intrusion. High-resistivity (> 300 ohm-m) values have been related with less permeable zones in the SW of Cinco Picos and Guilherme Moniz caldera walls.     

Sediment contamination in floodplains and alluvial terraces as an historical record of gold exploitation in the Carmo River basin,Southeast Quadrilátero Ferrífero,Minas Gerais,Brazil

This paper describes the geochemistry of sediment samples placed in floodplains and alluvial terraces downstream from gold mines in the Carmo River basin, Quadrilátero Ferrífero, Minas Gerais, Brazil. The geochemistry signature Na₂O, K₂O, SiO₂, CaO, MgO, Al₂O₃, Fe₂O₃, TiO₂, P₂O₅, Mn, As, Cu, Zn, Ba, Ni, Cr, S, Co were analyzed in different facies from stratigraphic profiles. As, Cu, Zn, and Mn anomalies are mainly associated with the clayed facies deposited in floodplains and oxbow lakes, and with coarse‐sediment facies deposited in the channel. The facies were accumulated by the gold exploitation activity in the region. The contamination of As, Cu, and Zn was controlled by minerals such as iron oxides and hydroxides (hematite, magnetite, and mainly goethite), manganese oxides, and sulfide‐rich minerals. The As‐bearing sediments of the region characterize one of the most As contaminated area of Brazil. Their main source is associated with gold exploration in the last three centuries.     

Crustal and upper mantle structures of the brazilian coast

The Rayleigh wave phase and group velocities in the period range of 24–39 sec, obtained from two earthquakes which occurred in northeastern brazil and which were recorded by the Brazilian seismological station RDJ (Rio de Janeiro), have been used to study crustal and upper mantle structures of the Brazilian coastal region. Three crustal and upper mantle models have been tried out to explain crustal and upper mantle structures of the region. The upper crust has not been resolved, due basically to the narrow period range of the phase and group velocities data. The phase velocity inversions have exhibited good resolutions for both lower crust and upper mantle, with shear wave velocities characteristic of these regions. The group velocity data inversions for these models have showed good results only for the lower crust. The shear wave velocities of the lower crust (3.86 and 3.89 km/sec), obtained with phase velocity inversions, are similar to that (=3.89 km/sec) found byHwang (1985) to the eastern South American region, while group velocity inversions have presented shear velocity (=3.75 km/sec) similar to that (=3.78 km/sec) found byLazcano (1972) to the Brazilian shield. It was not possible to define sharply the crust-mantle transition, but an analysis of the phase and group velocity inversions results has indicated that the total thickness of the crust should be between 30 and 39 km. The crustal and upper mantle model, obtained with phase velocity inversion, can be used as a preliminary model for the Brazilian coast.     

Inversion of free oscillation data for an elliptical rotating earth in source moment tensor studies

It is shown, through numerical experiments, that the effect of ignoring ellipticity and rotation of the earth when inverting free oscillation data in moment tensor studies, is to introduce spurious spectral components in the solution. For numerical simulation of the data conditions of the 1970 deep Colombian event the spurious part has isotropic and deviatoric components, besides a distortion in the phase spectra which may lead to artificial precursive source in the solution. The magnitude of the artificial isotropic component is of the order of 10% of the real source moment tensor, depending on the data set used in the inversion. Measuring the excitation of each mode at each station using the technique of integrating over the spectral peaks does not cancel completely the effect of multiplet splitting, in particular that splitting due to rotation of the earth. The effect of lateral heterogeneities was simulated by introducing arbitrary splitting parameters which produced scattering in the eigenperiods compatible with those observed. For that splitting the inversion rendered additional isotropic components.We conclude that the observed implosive precursor the the 1970 Colombian event could have been artificially introduced by ignoring rotation, ellipticity and lateral heterogeneities of the earth.A procedure to invert free oscillation data for an elliptical rotating earth is proposed. It could be applied to a laterally inhomogeneous earth if the excitation for that model could be computed. Its application to real data for the deep Colombian event indicates that we will need to improve our knowledge on the effect of rotation, ellipticity, lateral heterogeneities and anelasticity on free oscillation and their excitation in order to solve accurately for the six components of the moment tensor independently.