Sediment contamination in floodplains and alluvial terraces as an historical record of gold exploitation in the Carmo River basin,Southeast Quadrilátero Ferrífero,Minas Gerais,Brazil

This paper describes the geochemistry of sediment samples placed in floodplains and alluvial terraces downstream from gold mines in the Carmo River basin, Quadrilátero Ferrífero, Minas Gerais, Brazil. The geochemistry signature Na₂O, K₂O, SiO₂, CaO, MgO, Al₂O₃, Fe₂O₃, TiO₂, P₂O₅, Mn, As, Cu, Zn, Ba, Ni, Cr, S, Co were analyzed in different facies from stratigraphic profiles. As, Cu, Zn, and Mn anomalies are mainly associated with the clayed facies deposited in floodplains and oxbow lakes, and with coarse‐sediment facies deposited in the channel. The facies were accumulated by the gold exploitation activity in the region. The contamination of As, Cu, and Zn was controlled by minerals such as iron oxides and hydroxides (hematite, magnetite, and mainly goethite), manganese oxides, and sulfide‐rich minerals. The As‐bearing sediments of the region characterize one of the most As contaminated area of Brazil. Their main source is associated with gold exploration in the last three centuries.     

Dynamics of lava flow fronts, Arenal Volcano, Costa Rica

Arenal Volcano has effused basaltic andesite lava flows nearly continuously since September, 1968. The two different kinds of material in flows, lava and lava debris, have different rheologic properties and dynamic behavior. Flow morphology depends on the relationship between the amount and distribution of the lava and the debris, and to a lesser extent the ground morphology.Two main units characterize the flows: the channel zone and the frontal zone. The channel zone consists of two different units, the levées and the channel proper. A velocity profile in the channel shows a maximum value at the plug where the rate of shear is zero, and a velocity gradient increasing outward until, at the levées, the velocity becomes zero. Cooling produces a marked temperature gradient in the flow, leading to the formation of debris by brittle fracture when a critical value of shear rate to viscosity is reached. When the lava supply ceases, much of this debris and part of the lava is left behind after the flow nucleus drains out, forming a collapsed channel.Processes at the frontal zone include levée formation, debris formation, the change in shape of the front, and the choice of the flow path. These processes are controlled primarily by the rheological properties of the lava.Frontal zone dynamics can be understood by fixing the flow front as the point of reference. The lava flows through the channel into the front where it flows out into the levées, thereby increasing the length of the channel and permitting the front to advance. The front shows a relationship of critical height to the yield strength (τ₀) surface tension, and slope; its continued movement is activated by the pressure of the advancing lava in the channel behind. For an ideal flow (isothermal, homogeneous, and isotropic) the ratio of the section of channel proper to the section of levées is calculated and the distance the front will have moved at any time t_x can be determined once the amount of lava available to the front is known. Assuming that the velocity function of the front {G(t)} during the collapsing stage is proportional to the entrance pressure of the lava at the channel-front boundary, an exponential decrease of velocity through time is predicted, which shows good agreement with actual frontal velocity measurements taken on two flows. Local variations in slope have a secondary effect on frontal velocities.Under conditions of constant volume the frontal zone can be considered as a machine that consumes energy brought in by the lava to perform work (front advancement). While the front will use its potential energy to run the process, the velocity at which it occurs is controlled by the activation energy that enters the system as the kinetic energy of the lava flowing into the front. A relation for the energy contribution due to frontal acceleration is also derived. Finally the entrance pressure, that permits the front to deform, is calculated. Its small value confirms that the lava behaves very much like a Bingham plastic.     

Inversion of free oscillation data for an elliptical rotating earth in source moment tensor studies

It is shown, through numerical experiments, that the effect of ignoring ellipticity and rotation of the earth when inverting free oscillation data in moment tensor studies, is to introduce spurious spectral components in the solution. For numerical simulation of the data conditions of the 1970 deep Colombian event the spurious part has isotropic and deviatoric components, besides a distortion in the phase spectra which may lead to artificial precursive source in the solution. The magnitude of the artificial isotropic component is of the order of 10% of the real source moment tensor, depending on the data set used in the inversion. Measuring the excitation of each mode at each station using the technique of integrating over the spectral peaks does not cancel completely the effect of multiplet splitting, in particular that splitting due to rotation of the earth. The effect of lateral heterogeneities was simulated by introducing arbitrary splitting parameters which produced scattering in the eigenperiods compatible with those observed. For that splitting the inversion rendered additional isotropic components.We conclude that the observed implosive precursor the the 1970 Colombian event could have been artificially introduced by ignoring rotation, ellipticity and lateral heterogeneities of the earth.A procedure to invert free oscillation data for an elliptical rotating earth is proposed. It could be applied to a laterally inhomogeneous earth if the excitation for that model could be computed. Its application to real data for the deep Colombian event indicates that we will need to improve our knowledge on the effect of rotation, ellipticity, lateral heterogeneities and anelasticity on free oscillation and their excitation in order to solve accurately for the six components of the moment tensor independently.     

An audio-magnetotelluric investigation in Terceira Island (Azores)

Ten audio-magnetotelluric soundings have been carried out along a profile crossing the Serra do Cume caldera in the eastern part of the Terceira Island (Azores). The main objectives of this investigation were to detect geoelectrical features related with tectonic structures and to characterize regional hydrological and hydrothermal aspects mainly those related to geothermal fluid dynamics.Three-dimensional numerical investigation showed that the data acquired at periods shorter than 1 s are not significantly affected by ocean effect. The data was analysed using the Smith's decomposition method in order to investigate possible distortions caused by superficial structures and to estimate a global regional strike. The results suggest that in general the soundings were not distorted. A regional N55°W strike was chosen for the two-dimensional data inversion.The low-resistivity zones (10–30 ohm-m) displayed in the central part of the 2-D geoelectrical model have been interpreted as caused by hydrothermal circulation. The low-resistivity anomalies at the ends of the profile might be attributed to alteration zones with interaction of seawater intrusion. High-resistivity (> 300 ohm-m) values have been related with less permeable zones in the SW of Cinco Picos and Guilherme Moniz caldera walls.     

Crustal and upper mantle structures of the brazilian coast

The Rayleigh wave phase and group velocities in the period range of 24–39 sec, obtained from two earthquakes which occurred in northeastern brazil and which were recorded by the Brazilian seismological station RDJ (Rio de Janeiro), have been used to study crustal and upper mantle structures of the Brazilian coastal region. Three crustal and upper mantle models have been tried out to explain crustal and upper mantle structures of the region. The upper crust has not been resolved, due basically to the narrow period range of the phase and group velocities data. The phase velocity inversions have exhibited good resolutions for both lower crust and upper mantle, with shear wave velocities characteristic of these regions. The group velocity data inversions for these models have showed good results only for the lower crust. The shear wave velocities of the lower crust (3.86 and 3.89 km/sec), obtained with phase velocity inversions, are similar to that (=3.89 km/sec) found byHwang (1985) to the eastern South American region, while group velocity inversions have presented shear velocity (=3.75 km/sec) similar to that (=3.78 km/sec) found byLazcano (1972) to the Brazilian shield. It was not possible to define sharply the crust-mantle transition, but an analysis of the phase and group velocity inversions results has indicated that the total thickness of the crust should be between 30 and 39 km. The crustal and upper mantle model, obtained with phase velocity inversion, can be used as a preliminary model for the Brazilian coast.     

Short‐ and long‐term evapotranspiration rates at ecological restoration sites along a large river receiving rare flow events

Many large rivers around the world no longer flow to their deltas, due to ever greater water withdrawals and diversions for human needs. However, the importance of riparian ecosystems is drawing increasing recognition, leading to the allocation of environmental flows to restore river processes. Accurate estimates of riparian plant evapotranspiration (ET) are needed to understand how the riverine system responds to these rare events and achieve the goals of environmental flows. In 2014, historic environmental flows were released into the Lower Colorado River at Morelos Dam (Mexico); this once perennial but now dry reach is the final stretch to the mighty Colorado River Delta. One of the primary goals was to supply native vegetation restoration sites along the reach with water to help seedlings establish and boost groundwater levels to foster the planted saplings. Patterns in ET before, during, and after the flows are useful for evaluating whether this goal was met and understanding the role that ET plays in this now ephemeral river system. Here, diurnal fluctuations in groundwater levels and Moderate Resolution Imaging Spectroradiometer (MODIS) data were used to compare estimates of ET specifically at 3 native vegetation restoration sites during 2014 planned flow events, and MODIS data were used to evaluate long‐term (2002–2016) ET responses to restoration efforts at these sites. Overall, ET was generally 0–10 mm d^?1 across sites, and although daily ET values from groundwater data were highly variable, weekly averaged estimates were highly correlated with MODIS‐derived estimates at most sites. The influence of the 2014 flow events was not immediately apparent in the results, although the process of clearing vegetation and planting native vegetation at the restoration sites was clearly visible in the results.     

Contamination of port zone sediments by metals from Large Marine Ecosystems of Brazil

Sediment contamination by metals poses risks to coastal ecosystems and is considered to be problematic to dredging operations. In Brazil, there are differences in sedimentology along the Large Marine Ecosystems in relation to the metal distributions. We aimed to assess the extent of Al, Fe, Hg, Cd, Cr, Cu, Ni, Pb and Zn contamination in sediments from port zones in northeast (Mucuripe and Pecém) and southeast (Santos) Brazil through geochemical analyses and sediment quality ratings. The metal concentrations found in these port zones were higher than those observed in the continental shelf or the background values in both regions. In the northeast, metals were associated with carbonate, while in Santos, they were associated with mud. Geochemical analyses showed enrichments in Hg, Cd, Cu, Ni and Zn, and a simple application of international sediment quality guidelines failed to predict their impacts, whereas the use of site-specific values that were derived by geochemical and ecotoxicological approaches seemed to be more appropriate in the management of the dredged sediments.     

Geodetic constraints on active tectonics of the Western Mediterranean: Implications for the kinematics and dynamics of the Nubia-Eurasia plate boundary zone

We present GPS observations in Morocco and adjacent areas of Spain from 15 continuous (CGPS) and 31 survey-mode (SGPS) sites extending from the stable part of the Nubian plate to central Spain. We determine a robust velocity field for the W Mediterranean that we use to constrain models for the Iberia-Nubia plate boundary. South of the High Atlas Mountain system, GPS motions are consistent with Nubia plate motions from prior geodetic studies. We constrain shortening in the Atlas system to <1.5 mm/yr, 95% confidence level. North of the Atlas Mountains, the GPS velocities indicate Nubia motion with respect to Eurasia, but also a component of motion normal to the direction of Nubia-Eurasia motion, consisting of southward translation of the Rif Mountains in N Morocco at rates exceeding 5 mm/yr. This southward motion appears to be directly related to Miocene opening of the Alboran Sea. The Betic Mountain system north of the Alboran Sea is characterized by WNW motion with respect to Eurasia at ～1–2 mm/yr, paralleling Nubia-Eurasia relative motion. In addition, sites located in the Betics north of the southerly moving Rif Mountains also indicate a component of southerly motion with respect to Eurasia. We interpret this as indicating that deformation associated with Nubia-Eurasia plate motion extends into the southern Betics, but also that the Betic system may be affected by the same processes that are causing southward motion of the Rif Mountains south of the Alboran Sea. Kinematic modeling indicates that plate boundary geometries that include a boundary through the Straits of Gibraltar are most compatible with the component of motion in the direction of relative plate motion, but that two additional blocks (Alboran-Rif block, Betic Mountain block), independent of both Nubia and Eurasia are needed to account for the motions of the Rif and Betic Mountains normal to the direction of relative plate motion. We speculate that the southward motions of the Alboran-Rif and Betic blocks may be related to mantle flow, possibly induced by southward rollback of the subducted Nubian plate beneath the Alboran Sea and Rif Mountains.     

Modeling the low-latitude ionospheric electron density and plasma turbulence in the November 2004 storm period

The storm period of 8–12 November 2004 offers an opportunity for insight into the phenomena of low-latitude ionospheric structure during geomagnetically disturbed times because of the strength of the disturbances, the timing of the storms, and the instrumentation that was operating during the interval. We will take advantage of these factors to model the ambient ionosphere and the plasma turbulence responsible for radio scintillation within it, using the AFRL low-latitude ambient/turbulent ionospheric model and the storm-time model features described in the companion paper [Retterer, J.M., Kelley, M.C., 2009. Solar-wind drivers for low-latitude ionospheric models during geomagnetic storms. J. Atmos. Solar-Terr. Phys., this issue]. The model plasma densities show very good agreement with the densities measured by the Jicamarca ISR as well as with the total electron content (TEC) measured by the Boston College South American chain of GPS receivers. The detection by the radar of coherent returns from plasma turbulence match well the times of predicted ionospheric instability. The predicted geographic extent of the occurrence of equatorial plasma bubbles was matched by DMSP satellite observations and our forecasts of scintillation strength were validated with measurements of S4 at Ancon and Antofagasta by stations of the AFRL SCINDA network.     

The contrasted evolution of high and low flows and precipitation indices in the Duero basin (Spain)

Abstract

Trends in high and low flows are valuable indicators of hydrological change because they highlight changes in various parts of the frequency distribution of streamflow series. This enables improved assessment of water availability in regions with high seasonal and inter-annual variability. There has been a substantial reduction in water resources in the Duero basin (Iberian Peninsula, Spain) and other areas of the Mediterranean region during the last 50 years, and this is likely to continue because of climate change. In this study, we investigated the evolution and trends in high and low flows in the Spanish part of the Duero basin, and in equivalent or closely-related precipitation indices for the period 1961–2005. The results showed a general trend of decrease in the frequency and magnitude of high flows throughout most of the basin. Moreover, the number of days with low flows significantly increased over this period. No clear relationship was evident between the evolution of high/low flows and changes in the distribution frequencies of the precipitation series. In contrast to what was expected, the number of days with heavy precipitation and the mean annual precipitation did not show significant trends across the basin, and the number of days without rainfall decreased slightly. The divergence between precipitation and runoff evolution was more accentuated in spring and summer. In the absence of trends in precipitation, it is possible that reforestation processes in the region, and increasing temperatures in recent decades, could be related to the decreasing frequency of high flows and the increasing frequency of low flows.

Editor Z.W. Kundzewicz; Associate editor S. Grimaldi

Citation Morán-Tejeda, E., López-Moreno, J.I., Vicente-Serrano, S.M., Lorenzo-Lacruz, J. and Ceballos-Barbancho, A., 2012. The contrasted evolution of high and low flows and precipitation indices in the Duero basin (Spain). Hydrological Sciences Journal, 57 (4), 591–611.