An experiment on reservoir representation schemes to improve hydrologic prediction: coupling the national water model with the HEC-ResSim

ABSTRACT

This study experiments with reservoir representation schemes to improve the ability to model active water management in the National Water Model (NWM). For this purpose, we developed an integrated water management model, NWM-ResSim, by coupling the NWM with HEC-ResSim, and two reservoir representation schemes are tested: simulation of reservoir operations and retrieval of scheduled operations. The experiments focus on a pilot reservoir domain in the Russian River basin – Lake Mendocino, California – and its contributing watershed. The evaluation results suggest that the NWM-ResSim improves the simulation performance of reservoir outflow from this managed reservoir over the NWM default level pool routing scheme. The degree of this improvement depends on the suitability of the operation guidance; the reservoir operations simulation scheme could have acceptable errors for the purposes of water resources management, but not for flood operations. Results of the retrieval scheme of scheduled operations demonstrated better performance for sub-daily flood operations.     

Low-latitude control of interhemispheric sea-surface temperature contrast in the tropical Atlantic over the past 21 kyears: the possible role of SE trade winds

To stimulate a discussion on the role of tropical atmospheric circulation versus thermohaline circulation changes for tropical Atlantic sea-surface temperature (SST) variations, we present a record of the SST contrast (SST) between the tropical northwest and southeast Atlantic from the Last Glacial Maximum to the Late Holocene. The SST was calculated from two alkenone-derived SST records; one from the Caribbean Sea and the other from the Angola Basin. Changes in the cross-equatorial SST were then compared with an abundance record of Florisphaera profunda from the equatorial Atlantic, which is indicative of SE trade-wind induced variations in thermocline depth in the equatorial divergence zone. This comparison implies that the Last Glacial Maximum, the Younger Dryas, and the Mid to Late Holocene were periods of strong SE trade winds, which led to an intense upwelling-related cooling in the southeast Atlantic and concurrently enhanced advection of warm tropical South Atlantic waters into the western tropical Atlantic. Accordingly, a coupled ocean-atmospheric process has probably created a dipole-like SST distribution pattern in the tropical Atlantic during these three distinct climatic periods. In contrast, Heinrich Event 1, the Bølling-Allerød, and the Early Holocene were intervals of weakened SE trade winds, causing a warming in the southeast Atlantic. However, synchronous warming in both regions during Heinrich Event 1 can be partially attributed to a weakening of thermohaline overturning which caused a reduced northward heat transport from the low-latitude to the high-latitude North Atlantic.     

The Kyonggi Shear Zone of the Central Korean Peninsula: Late Orogenic Imprint of the North and South China Collision

The crustal-scale Kyonggi shear zone of central Korea has been identified as a major boundary between the Precambrian Kyonggi massif in the south and the Imjingang belt in the north. The latter is an eastward extension of the Qinling-Dabie-Sulu collisional belt of China. Field observations and microstructural analysis indicate that the extensional shear zone evolved from a deep crustal ductile regime to a shallow crustal brittle regime, associated with a rapid uplift of the Kyonggi massif following the Late Permian-Early Triassic collision between the Sino-Korean and Yangtze cratons. A Rb-Sr muscovite age (226+/-1.2 Ma) of the mylonite suggests that the extensional ductile shearing occurred during the Late Triassic.     

Assessment of drought vulnerability based on the soil moisture PDF

This paper studies the statistics of the soil moisture condition and its monthly variation for the purpose of evaluating drought vulnerability. A zero-dimensional soil moisture dynamics model with the rainfall forcing by the rectangular pulses Poisson process model are used to simulate the soil moisture time series for three sites in Korea: Seoul, Daegu, and Jeonju. These sites are located in the central, south-eastern, and south-western parts of the Korean Peninsular, respectively. The model parameters are estimated on a monthly basis using hourly rainfall data and monthly potential evaporation rates obtained by the Penmann method. The resulting soil moisture simulations are summarized on a monthly basis. In brief, the conclusions of our study are as follows. (1) Strong seasonality is observed in the simulations of soil moisture. The soil moisture mean is less than 0.5 during the dry spring season (March, April, and June), but other months exceed the 0.5 value. (2) The spring season is characterized by a low mean value, a high standard deviation and a positive skewness of the soil moisture content. On the other hand, the wet season is characterized by a high mean value, low standard deviation, and negative skewness of the soil moisture content. Thus, in the spring season, much drier soil moisture conditions are apparent due to the higher variability and positive skewness of the soil moisture probability density function (PDF), which also indicates more vulnerability to severe drought occurrence. (3) Seoul, Daegue, and Jeonju show very similar overall trends of soil moisture variation; however, Daegue shows the least soil moisture contents all through the year, which implies that the south-eastern part of the Korean Peninsula is most vulnerable to drought. On the other hand, the central part and the south-western part of the Korean peninsula are found to be less vulnerable to the risk of drought. The conclusions of the study are in agreement with the climatology of the Korean Peninsula.     

Temporal variability in summertime bottom hypoxia in shallow areas of Mobile Bay,Alabama

This paper addresses temporal variability in bottom hypoxia in broad shallow areas of Mobile Bay, Alabama. Time-series data collected in the summer of 2004 from one station (mean depth of 4 m) exhibit bottom dissolved oxygen (DO) variations associated with various time scales of hours to days. Despite a large velocity shear, stratification was strong enough to suppress vertical mixing most of the time. Bottom DO was closely related to the vertical salinity gradient (ΔS). Hypoxia seldom occurred when ΔS (over 2.5 m) was <2 psu and occurred almost all the time when ΔS was >8 psu in the absence of extreme events like hurricanes. Oxygen balance between vertical mixing and total oxygen demand was considered for bottom water from which oxygen demand and diffusive oxygen flux were estimated. The estimated decay rates at 20°C ranging between 0.175–0.322 d⁻¹ and the corresponding oxygen consumption as large as 7.4 g O₂ m⁻² d⁻¹ fall at the upper limit of previously reported ranges. The diffusive oxygen flux and the corresponding vertical diffusivity estimated for well mixed conditions range between 8.6–9.5 g O₂ m⁻² d⁻¹ and 2.6–2.9 m² d⁻¹, respectively. Mobile Bay hypoxia is likely to be associated with a large oxygen demand, supported by both water column and sediment oxygen demands, so that oxygen supply from surface water during destratification events would be quickly exhausted to return to hypoxic conditions within a few hours to days after destratification events are terminated.     

Numerical simulation of ground anchors

A procedure of finite-element modeling and beam-column modeling of ground anchors was proposed in this study to investigate the load transfer mechanism in ground anchors. The procedure included the modeling of soil, grout, and strand tendon and the interface modeling of soil–grout and grout–strand in ground anchors. A series of finite element analyses and beam-column analyses were performed using the proposed models on ground anchors. The numerical predictions were compared with observed measurements in a field load test. The results indicated that the numerical simulation of load transfer mechanism on ground anchors can provide reasonable predictions.     

A novel approach to estimate iron distribution within different pore domains of structured media

The Fe content of soils and aquifer solids is usually quantified using different extraction solutions performed with homogenized samples in a well-mixed batch experiment. For structured media where preferential flow prevails over the matrix flow, however, the Fe content determined from homogenized samples may not well represent the Fe available for biogeochemical reactions. In this study ammonium oxalate extraction was performed on a core of intact saprolite where physical structure was preserved. An unsaturated flow setup was modified with the intent of allowing the extraction under two pore tensions, 15 and 0 cm of water, although a malfunctioning vacuum regulator made this more difficult than anticipated. Approximately 85% of the oxalate-extractable Fe was contained within the finer pore domain (matrix potential larger than 15 cm). Less than 15.5% of the extracted Fe mass (an upper bound) was present in domains of pore tension less than15 cm. To the extent that Fe(III) oxides play an important role in contaminant biogeochemistry and solute transport, their distribution in structured subsurface media is critical to the understanding of these processes.     

Migration and dispersion of trace elements in the rock–soil–plant system in areas underlain by black shales and slates of the Okchon Zone, Korea

The Okchon black shale in Korea provides a typical example of natural geological materials enriched with potentially toxic elements. The Chung-Joo, Duk-Pyung, Geum-Kwan, I-Won, Bo-Eun and Chu-Bu areas are underlain by these black shales and slates of the Guryongsan Formation or the Changri Formation, which are parts of the Okchon Group in the central part of the southern Korean Peninsula. In order to investigate the enrichment levels and dispersion patterns of potentially toxic elements in the rock–soil–plant system, environmental geochemical surveys were undertaken in the above six study areas in the Okchon Zone. After appropriate preparation, rock and soil samples were analyzed for potentially toxic elements by instrumental neutron activation analysis (INAA) and inductively coupled plasma atomic emission spectrometry (ICP-AES), and plant samples by atomic absorption spectrometry (AAS). In particular, Ba, Cd, Mo, V and U in Okchon black shales are highly enriched, and their mean concentrations are significantly higher than those in black slates. These elements are geochemically associated, and might be enriched simultaneously. The highest mean concentrations of 42.0 μg g⁻¹ As, 2100 μg g⁻¹ Ba, 10.9 μg g⁻¹ Cd, 213 μg g⁻¹ Mo, 83 μg g⁻¹ U, 938 μg g⁻¹ V and 394 μg g⁻¹ Zn are found in black shales from the Duk-Pyung area. Mean concentrations of As, Mo and U in soils overlying black shales occurring in the Duk-Pyung area (30 μg g⁻¹ As, 24 μg g⁻¹ Mo and 50 μg g⁻¹ U) and Chu-Bu area (39 μg g⁻¹ As, 15 μg g⁻¹ Mo and 27 μg g⁻¹ U) are higher than the permissible level. Enrichment index values of the six study areas decrease in the order of Duk-Pyung > Chu-Bu > Bo-Eun > Chung-Joo > Geum-Kwan = I-Won areas. Relationships between trace element concentrations in soils and plants are significantly correlated, and the biological absorption coefficients (BAC) in plants are in the order of Cd > Zn = Cu > Pb, which suggests that Cd is more bioavailable to plants than the other elements. Cadmium concentrations in plant species decrease in the order of chinese cabbage > red pepper > soybean = sesame > rice stalk > corn > rice grain. From the result of sequential extraction analysis of soils, relatively high proportions of Cu, Pb and Zn are present as residual fractions, and that of Cd as non-residual fractions. Cadmium occurs predominantly as exchangeable/water-acid soluble phase in soils, and this is in agreement with the findings of high Cd concentrations in plants.     

Quantitative Assessment of Extrinsic Damage in Rock Materials

Summary   Comminution (crushing and grinding) of rock materials is energy-intensive and expensive. Much effort has been directed to improve the efficiency of conventional milling practice, but relatively little attention has been given to the potential benefits of blast-induced (extrinsic) damage on comminution processes. The objective of this research is to investigate the effect of shock-induced “crack-like” damage on rock properties for three petrologically distinct rock materials under laboratory conditions. In order to evaluate the effect of shock-induced damage, a quantitative measure of rock damage is needed. Shock loading of rock material was accomplished with an explosively driven split Hopkinson pressure bar. Laboratory measurements show that the average uniaxial compressive strengths for damaged specimens are slightly lower than those for intact specimens. Based on damage mechanics, the scalar damage variable () was experimentally determined as the relative reduction in ultrasonic wave velocity of damaged versus intact rock. increases as the shock energy dissipated in rock material increases. A crack density was determined by confocal image analysis. Measurements following shock loading indicate that ultrasonic wave velocity in rock partially recovers with time. Ultrasonic wave velocity and confocal image analysis may be useful in quantitatively assessing the internal crack-like damage in rock materials.