Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

印度板块和亚洲大陆在何时何地碰撞

印度板块和亚洲大陆的初始碰撞时间是所有相关的喜马拉雅-西藏造山体系演化模式的主控条件,并严重影响到对众多与青藏高原隆升和东亚大陆挤出相关的地质过程速率的解释,以及对新生代全球气候变化的理解。尽管印度板块和亚洲大陆汇聚的速率在55Ma突然减缓被广泛地认为是初始碰撞的标志,但这次碰撞所造成的主要构造效应直到20多个百万年以后才显现出来。对印度板块和亚洲大陆相对位置的重新估算,表明它们在55Ma时并没有达到可以彼此发生碰撞的距离。基于来自西藏新的野外证据和对已有数据的重新评估,认为初始碰撞发生在始新世—渐新世之交（约34Ma）,并对55Ma时发生的地质事件提出了另一种解释     

The dynamics and thermodynamics of large ash flows

 Ash flow deposits, containing up to 1000 km³ of material, have been produced by some of the largest volcanic eruptions known. Ash flows propagate several tens of kilometres from their source vents, produce extensive blankets of ash and are able to surmount topographic barriers hundreds of metres high. We present and test a new model of the motion of such flows as they propagate over a near horizontal surface from a collapsing fountain above a volcanic vent. The model predicts that for a given eruption rate, either a slow (10–100 m/s) and deep (1000–3000 m) subcritical flow or a fast (100–200 m/s) and shallow (500–1000 m) supercritical flow may develop. Subcritical ash flows propagate with a nearly constant volume flux, whereas supercritical flows entrain air and become progressively more voluminous. The run-out distance of such ash flows is controlled largely by the mass of air mixed into the collapsing fountain, the degree of fragmentation and the associated rate of loss of material into an underlying concentrated depositional system, and the mass eruption rate. However, in supercritical flows, the continued entrainment of air exerts a further important control on the flow evolution. Model predictions show that the run-out distance decreases with the mass of air entrained into the flow. Also, the mass of ash which may ascend from the flow into a buoyant coignimbrite cloud increases as more air is entrained into the flow. As a result, supercritical ash flows typically have shorter runout distances and more ash is elutriated into the associated coignimbrite eruption columns. We also show that one-dimensional, channellized ash flows typically propagate further than their radially spreading counterparts. As a Plinian eruption proceeds, the erupted mass flux often increases, leading to column collapse and the formation of pumiceous ash flows. Near the critical conditions for eruption column collapse, the flows are shed from high fountains which entrain large quantities of air per unit mass. Our model suggests that this will lead to relatively short ash flows with much of the erupted material being elutriated into the coignimbrite column. However, if the mass flux subseqently increases, then less air per unit mass is entrained into the collapsing fountain, and progressively larger flows, which propagate further from the vent, will develop. Our model is consistent with observations of a number of pyroclastic flow deposits, including the 1912 eruption of Katmai and the 1991 eruption of Pinatubo. The model suggests that many extensive flow sheets were emplaced from eruptions with mass fluxes of 10⁹–10¹⁰ kg/s over periods of 10³–10⁵ s, and that some indicators of flow "mobility" may need to be reinterpreted. Furthermore, in accordance with observations, the model predicts that the coignimbrite eruption columns produced from such ash flows rose between 20 and 40 km. Received: 25 August 1995 / Accepted: 3 April 1996     

Plasmasphere convection patterns observed simultaneously from two ground stations

Whistler data recorded during a 14 h period on 10–11 July 1973 at Siple (L = 4.17) and Sanae (L = 3.98) have been used to compare the apparent plasma convection patterns observed from these Antarctic stations. Two distinct bulges in the plasmasphere are seen at both stations, each bulge corresponding to an apparent outflowed followed by in flow of plasma. These structures do not coincide in U.T. or M.L.T. The first bulge is seen at Siple almost 1 h earlier in M.L.T. than at Sanae and the second bulge almost 3 h earlier. This is interpreted in terms of a fairly rapid westward and inward movement of the plasmasphere structure.     

Hyper Redundancy for Accuracy Enhancement in Automated Close Range Photogrammetry

A generic network design in close range photogrammetry is one where optimal multi-ray intersection geometry is obtained with as few camera stations as practicable. Hyper redundancy is a concept whereby, once the generic network is in place, many additional images are recorded, with the beneficial impact upon object point precision being equivalent to the presence of multiple exposures at each camera position within the generic network. The effective number of images per station within a hyper redundant network might well be in the range of 10 to 20 or more. As is apparent when it is considered that a hyper redundant network may comprise hundreds of images, the concept is only applicable in practice to fully automatic vision metrology systems, where it proves to be a very effective means of enhancing measurement accuracy at the cost of minimal additional work in the image recording phase. This paper briefly reviews the network design and accuracy aspects of hyper redundancy and illustrates the technique by way of the photogrammetric measurement of surface deformation of a radio telescope of 26 m diameter. This project required an object point measurement accuracy of σ  = 0·065 mm, or 1/400 000 of the diameter of the reflector.     

Particle recycling in volcanic plumes

We have developed a new theoretical model of an eruption column that accounts for the re-entrainment of particles as they fall out of the laterally spreading umbrella cloud. The model illustrates how the mass flux of particles in the plume may increase with height in the plume, by a factor as large as 2.5 because of this recycling. Three important consequences are that (1) the critical velocity required to generate a buoyant eruption column for a given mass flux increases, (2) the total height of rise of the column may decrease, and (3) we infer that in relatively wind-free environments, for eruption columns near the conditions for collapse, the recycling of particles may lead to an unsteady oscillating motion of the plume, which, in time, may lead to the formation of interleaved fall and flow deposits.     

Life After Death

Predictions of the death of impoverished and actively marginalized racial and ethnic communities are premature. Many core African American societies have been devastated by the state, capital, and cultural policies of the last two decades. Simultaneously, geography and the other social sciences have been mobilized in order to prevent a fuller understanding of these communities and of the need for social equity. The further development of several approaches is required to open geography and the other disciplines up for community‐building, rather than community destruction. The incorporation of research in the following areas holds out the promise of revitalizing both: human rights; the ethnic movements underlying restructuring; the social construction of regions; the reproduction of social power; building ethnic alliance; and indigenous knowledge systems.