Evaluation of Bioavailability and Partitioning of Aluminum in Sediment Samples of Different Ecosystems by Modified Sequential Extraction Methods

Sequential extraction procedures are widely used to characterize the different operational fractions with different potential toxicity of metals in environmental solid samples. The present work describes the application of different analytical approaches for sequential extraction of aluminum to evaluate its mobility, availability, and persistent chemical forms in sediment samples of different fresh water ecosystems (lake, canal, and river). The conventional BCR three‐stage sequential extraction procedure (C‐BCR) was modified at each stage, by applying ultrasonic device (U‐BCR), in order to shorten the required shaking time of 16 h for each three steps (excluding the hydrogen peroxide digestion in step 3, which was not performed with ultrasonic bath), could be completed in 40, 50, and 45 min, respectively. The aluminum in all extracts were determination by atomic absorption spectrometry using nitrous oxide – acetylene flame. The accuracy of results obtained from C‐BCR and proposed U‐BCR was verified with literature reported values of certified sediment sample (BCR 701). The overall recoveries of aluminum obtained by proposed U‐BCR were found in the range of 96.7–113% of those values obtained with C‐BCR for all fractions. Use of ultrasonic device, provided a large saving in extraction time relative to conventional shaking. It was observed that major part of Al in real sediment samples (80–83% of total Al) were bound to residual fraction. The acid soluble fraction of aluminum extracted by 0.11 mol/L CH₃COOH has good correlation with aluminum content in corresponding water samples of each ecosystem.     

The effective number of cycles of earthquake ground motion

The seismic response of any system that accumulates damage under cyclic loading is dependent not only on the maximum amplitude of the motion but also its duration. This is explicitly recognized in methods for estimating the liquefaction potential of soil deposits. Many researchers have proposed that the effective number of cycles of the ground motion is a more robust indicator of the destructive capacity of the shaking than the duration. However, as is the case with strong‐motion duration, there is no universally accepted approach to determining the effective number of cycles of motion, and the different methods that have been proposed can give widely varying results for a particular accelerogram. Definitions of the effective number of cycles of motion are reviewed, classified and compared. Measurements are found to differ particularly for accelerograms with broad‐banded frequency content, which contain a significant number of non‐zero crossing peaks. The key seismological parameters influencing the number of cycles of motion and associated equations for predicting this quantity for future earthquakes are identified. Correlations between cycle counts and different duration measures are explored and found to be rather poor in the absence of additional parameters. Copyright © 2004 John Wiley & Sons, Ltd.     

Photoadaptation of carboxylating enzymes and photosynthesis during a spring bloom

Properties of the light saturation curve of photosynthesis and ribulose-1,5-bisphosphate carboxylase (RuBPC) activity are shown to change qualitatively in a natural population of marine phytoplankton during a spring bloom. Evidence is presented to show that these changes constitute photoadapative responses to increasing irradiance. As irradiance increased during the bloom, both the level of light-saturated photosynthesis (P_m) and the initial slope of the light saturation curve (α = photosynthetic efficiency) increased whether those parameters were normalized to chlorophyll a concentration (P_m^b, α^b) or to cell numbers (P_m^c, α^c). The magnitudes of these changes were such that I_k (= P_m/α, the photoadaptation parameter) did not change, but I_m, the light intensity at which photosynthesis becomes saturated, increased. RuBPC activity, both chlorophyll a (RuBPC^b) and cell number normalized (RuBPC^c), also increased during the bloom. We suggest that these adaptations were achieved by simultaneously increasing the number of photosynthetic units, proportionately decreasing the photosynthetic unit size, and increasing both the concentrations of the enzymes of the dark reactions and possibly also of photosynthetic electron transport components.We also observed diminished levels of photoinhibition in the high light adapted cells late in the bloom and have suggested that this was a consequence of the same suite of physiological changes.In situ carbon fixation per cell increased during the bloom whereas no change occurred in this parameter when normalized to chlorophyll a concentration. Although these photoadaptive responses thus permitted carbon to be fixed in situ more rapidly per cell, at a constant efficiency with respect to investment of energy in the photosynthetic apparatus, they did not result in a change in growth rate. Based on consideratios of the role of time scale in physiological adaptation, however, it is suggested that the observed alterations in photosynthesis with increasing irradiance might permit a cell to more rapidly fill an energy quota for division, possibly an advantage in a mixing environment in which energy is patchily distributed, both spatially and temporalyy.Phosphoenolpyruvate carboxylase activity when normalized to chlorophyll a (PEPC^b) did not change during the bloom while chlorophyll a normalized dark carbon fixation decreased sharply and was quantitatively small compared to PEPC^b. On this basis and considering that RuBPC^b increased during the bloom, it is suggested that, although PEPC may be involved in dark carbon fixation, its most important quantitative role is probably an indirect one in light dependent photosynthesis.We have also considered the relevance of laboratory results on photoadaptation to interpretations of field studies and have suggested that batch culture studies must be treated with caution but that turbidistat and semi-continuous methods provide reasonable simulations of natural conditions.     

Luminescence from glacimarine sediment-trap samples at the Antarctic Peninsula

Radiocarbon (¹⁴C) dating yields variable and high reservoir and core-top ages for glacimarine sediments around Antarctica. To test the suitability of luminescence as an alternate dating method we investigated the effectiveness of clock zeroing (by daylight) within fine-silt-size siliciclastic sediments from year-long vertical-array sediment traps in Andvord Bay and Brialmont Cove at the Antarctic Peninsula. Both long-bleach and short-bleach multi-aliquot IR-PSL (infrared photon stimulated luminescence) and single-aliquot, post-IR blue-PSL dating tests were conducted. As well, dual-bandwidth-bleaching thermoluminescence (TL) tests were performed on samples from Brialmont Cove. These TL bleaching tests indicate that silt from the middle and bottom traps at this site has had little or no exposure to daylight, but that silt from the top trap has had some exposure. All 24 samples (representing different seasons and different trap depths) exhibit anomalously old apparent ages (12 ka–60 ka) across annual seasons and depths of deposition when either long-bleach multi-aliquot or late-background-subtraction single-aliquot PSL procedures were employed. Thus regional bottom silts would be unsuited for dating by these two luminescence dating approaches. However, a short-bleach multi-aliquot IR-PSL procedure yields the expected zero ages for several samples, a promising result that requires further exploration.     

Prominence Characteristics in 16th Activity Cycle

Digitization of the daily prominence sketches based on data from the global observational network of visual solar spectroscopes was performed for 1922–1934. More than 55000 prominences were distinguished. The results of analysis of distributions by area, height, and prominence location are presented. In addition, the prominence characteristics were compared to those obtained from more recent observations at the Kislovodsk Mountain Astronomical Station of Pulkovo Observatory. The distributions of prominence areas and heights are close to lognormal. The maximal height distribution corresponds to ~25–40 arcsecs. A second maximum also exists for prominence heights of ~70–90 arcsecs.     

Pollution monitoring with meiofauna,using the ratio of nematodes to copepods

The ratio of nematodes to copepods was calculated for meiofauna samples from 17 beaches and additional values for intertidal and sublittoral sites were obtained from the literature. Intertidal ratios increased with decreasing particle size, but ratios from polluted sites were always extremely high. Sublittoral ratios increased with depth. It is suggested that this ratio has potential for monitoring organic pollution of sandy beaches.     

Finite element analysis of reinforced embankment foundation

A finite element analysis of a reinforced embankment-foundation system has been conducted using a coupled formulation and elastoplasticity theory. Such important factors as type of reinforcement, the type of clay, depth of foundation and drainage condition affecting the system have been systematically investigated using appropriate constitutive models to depict various components of the system and material parameters of two typical soft clay deposits found in India. The displacements, reinforcement force and maximum heights of the embankments are among the aspects presented and discussed. It is shown that the effectiveness of the reinforcement is dependent on its stiffness and the shear strength of the clay deposit. The foundation depth has significant effect on the nature and magnitude of displacement, the reinforcement force and the height of embankment. Drainage conditions are shown to markedly influence the effectiveness of reinforcement. Copyright © 1999 John Wiley & Sons, Ltd.     

3D alluvial aquifer reconstruction in polluted areas by means of GPR (Sabiñánigo,N Spain)

Assumptions of simple geometries for alluvial deposits (related to main rivers) can preclude determination of complexities that are revealed as fundamental controls in underground flow. Although subhorizontal contacts between alluvial and substratum materials are expected, previous sedimentary or erosional processes can result in irregular geometries, only accessible through detailed analysis. The studied case presents the 3D reconstruction of a Quaternary terrace in the proximities of Sabiñánigo (Southern Pyrenees, Northeastern Spain), lying on homogeneous Eocene marls. The studied area is located in an industrialized area supporting strongly pollutant chemical industry (chlorinated pesticides) for the past 50 years. The objective of the study was to constrain the groundwater pathway along the area to subsequently analyze leakage of chemicals to the water table. In order to reveal preferred flow paths, a detailed characterization of the internal structure of the alluvial deposits (0.5–13 m thick) and their relations with the Tertiary substratum was carried out by means of ground penetrating radar (GPR, 50 and 100 MHz antennas). The obtained models permit identifying several topographic highs in the alluvial/substratum contact, determining preferred pathways in water flow, favoring particular conditions associated with low levels of the water table. The presented results support the interest of application of GPR surveys in order to characterize the groundwater pathways in expected homogeneous areas and their importance in order to establish the contaminant surveillance network.     

Superdeep diamonds from the Juina area, Mato Grosso State, Brazil

Alluvial diamonds from the Juina area in Mato Grosso, Brazil, have been characterized in terms of their morphology, syngenetic mineral inclusions, carbon isotopes and nitrogen contents. Morphologically, they are similar to other Brazilian diamonds, showing a strong predominance of rounded dodecahedral crystals. However, other characteristics of the Juina diamonds make them unique. The inclusion parageneses of Juina diamonds are dominated by ultra-high-pressure ("superdeep") phases that differ both from "traditional" syngenetic minerals associated with diamonds and, in detail, from most other superdeep assemblages. Ferropericlase is the dominant inclusion in the Juina diamonds. It coexists with ilmenite, Cr-Ti spinel, a phase with the major-element composition of olivine, and SiO₂. CaSi-perovskite inclusions coexist with titanite (sphene), "olivine" and native Ni. MgSi-perovskite coexists with TAPP (tetragonal almandine-pyrope phase). Majoritic garnet occurs in one diamond, associated with CaTi-perovskite, Mn-ilmenite and an unidentified Si-Mg phase. Neither Cr-pyrope nor Mg-chromite was found as inclusions. The spinel inclusions are low in Cr and Mg, and high in Ti (Cr₂O₃<36.5 wt%, and TiO₂>10 wt%). Most ilmenite inclusions have low MgO contents, and some have very high (up to 11.5 wt%) MnO contents. The rare "olivine" inclusions coexisting with ferropericlase have low Mg# (87-89), and higher Ca, Cr and Zn contents than typical diamond-inclusion olivines. They are interpreted as inverted from spinel-structured (Mg, Fe)₂Si₂O₄. This suite of inclusions is consistent with derivation of most of the diamonds from depths near 670 km, and adds ilmenite and relatively low-Cr, high-Ti spinel to the known phases of the superdeep paragenesis. Diamonds from the Juina area are characterized by a narrow range of carbon isotopic composition ('¹³C=-7.8 to -2.5‰), except for the one majorite-bearing diamond ('¹³C=-11.4‰). There are high proportions of nitrogen-free and low-nitrogen diamonds, and the aggregated B center is predominant in nitrogen-containing diamonds. These observations have practical consequences for diamond exploration: Low-Mg olivine, low-Mg and high-Mn ilmenite, and low-Cr spinel should be included in the list of diamond indicator minerals, and the role of high-Cr, low-Ti spinel as the only spinel associated with diamond, and hence as a criterion of diamond grade in kimberlites, should be reconsidered.     

Tectonic Position of the South Anyui Suture

Geotectonics - The South Anyui Fold System was formed at the end of the Early Cretaceous at the site of a closed oceanic basin as a result of the collision of the Chukotka microcontinent with the...