Assessing the impact of large-scale dewatering on fault-controlled aquifer systems: a case study in the Acque Albule basin (Tivoli, central Italy)

The development of large-scale bedrock quarry operations often requires high-volume and long-term groundwater extraction to maintain a sustainable working environment. These dewatering activities often influence groundwater levels and flow patterns regionally. In the present study, the influence of the dewatering of the travertine quarry operations near the city of Tivoli, Italy, are quantitatively investigated through an integrated analysis of field data and numerical modeling. Lowering of regional groundwater levels in the vicinity of the quarry has led to destructive land subsidence and alterations to the flow system sustaining a hot-spring area. The study employs a finite element numerical model (FEFLOW) to evaluate and quantify the impact of the extensive dewatering on fault-controlled regional groundwater flow in the Acque Albule basin. By incorporating the physical field data and historical hydrologic information, the numerical model was calibrated against three groundwater scenarios, reproducing the effects of different exploitation activities, coupled with natural changes over the course of the quarry operation. The results indicate that groundwater withdrawals by the mining industry and by “Terme di Roma” spa resulted in the cessation of flow from the primary thermal spring and a drop in the phreatic level in the area consequently affected by land subsidence.     

Broad Timescale Forcing and Geomorphic Mediation of Tidal Marsh Flow and Temperature Dynamics

Tidal marsh functions are driven by interactions between tides, landscape morphology, and emergent vegetation. Less often considered are the diurnal pattern of tide extremes and seasonal variation of solar insolation in the mix of tidal marsh driver interactions. This work demonstrates how high-frequency hydroperiod and water temperature variability emerges from disparate timescale interactions between tidal marsh morphology, tidal harmonics, and meteorology in the San Francisco Estuary. We compare the tidal and residual flow and temperature response of neighboring tidal sloughs, one possessing natural tidal marsh morphology, and one that is modified for water control. We show that the natural tidal marsh is tuned to lunar phase and produces tidal and fortnight water temperature variability through interacting tide, meteorology, and geomorphic linkages. In contrast, temperature variability is dampened in the modified slough where overbank marsh plain connection is severed by levees. Despite geomorphic differences, a key finding is that both sloughs are heat sinks in summer by latent heat flux-driven residual upstream water advection and sensible and long-wave heat transfer. The precession of a 335-year tidal harmonic assures that these dynamics will shift in the future. Water temperature regulation appears to be a key function of natural tidal sloughs that depends critically on geomorphic mediation. We investigate approaches to untangling the relative influence of sun versus tide on residual water and temperature transport as a function of system morphology. The findings of this study likely have ecological consequences and suggest physical process metrics for tidal marsh restoration performance.     

U‐Pb Detrital Zircon Analysis – Results of an Inter‐laboratory Comparison

Inter‐laboratory comparison of laser ablation ICP‐MS and SIMS U‐Pb dating of synthetic detrital zircon samples provides an insight into the state‐of‐the art of sedimentary provenance studies. Here, we report results obtained from ten laboratories that routinely perform this type of work. The achieved level of bias was mostly within ± 2% relative to the ID‐TIMS U‐Pb ages of zircons in the detrital sample, and the variation is likely to be attributed to variable Pb/U elemental fractionation due to zircon matrix differences between the samples and the reference materials used for standardisation. It has been determined that ~ 5% age difference between adjacent age peaks is currently at the limit of what can be routinely resolved by the in situ dating of detrital zircon samples. Precision of individual zircon age determination mostly reflects the data reduction and procedures of measurement uncertainty propagation, and it is largely independent of the instrumentation, analytical technique and reference samples used for standardisation. All laboratories showed a bias towards selection of larger zircon grains for analysis. The experiment confirms the previously published estimates of the minimum number of grains that have to be analysed in order to detect minor zircon age populations in detrital samples.     

AVIATR—Aerial Vehicle for In-situ and Airborne Titan Reconnaissance

We describe a mission concept for a stand-alone Titan airplane mission: Aerial Vehicle for In-situ and Airborne Titan Reconnaissance (AVIATR). With independent delivery and direct-to-Earth communications, AVIATR could contribute to Titan science either alone or as part of a sustained Titan Exploration Program. As a focused mission, AVIATR as we have envisioned it would concentrate on the science that an airplane can do best: exploration of Titan??s global diversity. We focus on surface geology/hydrology and lower-atmospheric structure and dynamics. With a carefully chosen set of seven instruments??2 near-IR cameras, 1 near-IR spectrometer, a RADAR altimeter, an atmospheric structure suite, a haze sensor, and a raindrop detector??AVIATR could accomplish a significant subset of the scientific objectives of the aerial element of flagship studies. The AVIATR spacecraft stack is composed of a Space Vehicle (SV) for cruise, an Entry Vehicle (EV) for entry and descent, and the Air Vehicle (AV) to fly in Titan??s atmosphere. Using an Earth-Jupiter gravity assist trajectory delivers the spacecraft to Titan in 7.5 years, after which the AVIATR AV would operate for a 1-Earth-year nominal mission. We propose a novel ??gravity battery?? climb-then-glide strategy to store energy for optimal use during telecommunications sessions. We would optimize our science by using the flexibility of the airplane platform, generating context data and stereo pairs by flying and banking the AV instead of using gimbaled cameras. AVIATR would climb up to 14?km altitude and descend down to 3.5?km altitude once per Earth day, allowing for repeated atmospheric structure and wind measurements all over the globe. An initial Team-X run at JPL priced the AVIATR mission at FY10 $715M based on the rules stipulated in the recent Discovery announcement of opportunity. Hence we find that a standalone Titan airplane mission can achieve important science building on Cassini??s discoveries and can likely do so within a New Frontiers budget.     

A noble gas and cosmogenic radionuclide analysis of two ordinary chondrites from Almahata Sitta

Abstract– We present the results of a noble gas (He, Ne, Ar) and cosmogenic radionuclide (¹⁰Be, ²⁶Al, ³⁶Cl) analysis of two chondritic fragments (#A100, L4 and #25, H5) found in the Almahata Sitta strewn field in Sudan. We confirm their earlier attribution to the same fall as the ureilites dominating the strewn field, based on the following findings: (1) both chondrite samples indicate a preatmospheric radius of approximately 300 g cm^?2, consistent with the preatmospheric size of asteroid 2008 TC₃ that produced the Almahata Sitta strewn field; (2) both have, within error, a ²¹Ne/²⁶Al‐based cosmic ray exposure age of approximately 20 Ma, identical to the reported ages of Almahata Sitta ureilites; (3) both exhibit hints of ureilitic Ar in the trapped component. We discuss a possible earlier irradiation phase for the two fragments of approximately 10–20 Ma, visible only in cosmogenic ³⁸Ar. We also discuss the approximately 3.8 Ga (⁴He) and approximately 4.6 Ga (⁴⁰Ar) gas retention ages, measured in both chondritic fragments. These imply that the two chondrite fragments were incorporated into the ureilite host early in solar system evolution, and that the parent asteroid from which 2008 TC₃ is derived has not experienced a large break‐up event in the last 3.8 Ga.     

The 2011 eruption of Nabro volcano,Eritrea: perspectives on magmatic processes from melt inclusions

The 2011 eruption of Nabro volcano, Eritrea, produced one of the largest volcanic sulphur inputs to the atmosphere since the 1991 eruption of Mt. Pinatubo, yet has received comparatively little scientific attention. Nabro forms part of an off-axis alignment, broadly perpendicular to the Afar Rift, and has a history of large-magnitude explosive silicic eruptions, as well as smaller more mafic ones. Here, we present and analyse extensive petrological data obtained from samples of trachybasaltic tephra erupted during the 2011 eruption to assess the pre-eruptive magma storage system and explain the large sulphur emission. We show that the eruption involved two texturally distinct batches of magma, one of which was more primitive and richer in sulphur than the other, which was higher in water (up to 2.5 wt%). Modelling of the degassing and crystallisation histories demonstrates that the more primitive magma rose rapidly from depth and experienced degassing crystallisation, while the other experienced isobaric cooling in the crust at around 5 km depth. Interaction between the two batches occurred shortly before the eruption. The eruption itself was likely triggered by recharge-induced destabilisation of vertically extensive mush zone under the volcano. This could potentially account for the large volume of sulphur released. Some of the melt inclusions are volatile undersaturated, and suggest that the original water content of the magma was around 1.3 wt%, which is relatively high for an intraplate setting, but consistent with seismic studies of the Afar plume. This eruption was smaller than some geological eruptions at Nabro, but provides important insights into the plumbing systems and dynamics of off-axis volcanoes in Afar.     

Metal speciation in rivers affected by enhanced soil erosion and acidity

Dissolved (<1 kDa), colloidal (1 kDa–0.45 μm) and particulate (>0.45 μm) size fractions of 30 elements were determined for four rivers (Sirppujoki, Laajoki, Mynäjoki and Paimionjoki), including 12 low-order inflow streams, largely affected by soil erosion and acidity in SW Finland. In addition, geochemical modelling was used to predict the formation of free ions and complexes in these rivers. Total metal concentrations were relatively high but most of the elements occurred mainly in a colloidal or particulate form and even elements expected to be very soluble occurred to a large extent in colloidal form. According to geochemical modelling these patterns could be explained by in-stream metal complexation/adsorption only to a limited extent. Instead there were strong indications that the high metal concentrations and dominant solid fractions were largely caused by erosion of metal bearing phyllosilicates. A strong influence of acid sulphate (AS) soils, known to exist in the catchment, could be clearly distinguished in Sirppujoki river as it had very high concentrations of dissolved metals, while in the two nearby rivers (Laajoki and Mynäjoki) the influence of AS soils was largely masked by eroded phyllosilicates. In Paimionjoki river the colloidal and particulate fractions dominated very strongly, indicating that total metal concentrations are almost solely controlled by erosion of phyllosilicates. Consequently, rivers draining clay plains sensitive to erosion, like those in SW Finland, have generally high “background” metal concentrations due to erosion of relatively non-toxic colloidal/particulate phyllosilicates. Thus, relying on only semi-dissolved (<0.45 μm) concentrations obtained in routine monitoring and/or speciation modelling can lead to a great overestimation of the water toxicity in this environment.     

Oxygen fugacity control in piston-cylinder experiments: a re-evaluation

Jakobsson (Contrib Miner Petrol 164(3):397–407, 2012) investigated a double capsule assembly for use in piston-cylinder experiments that would allow hydrous, high-temperature, and high-pressure experiments to be conducted under controlled oxygen fugacity conditions. Using a platinum outer capsule containing a metal oxide oxygen buffer (Ni–NiO or Co–CoO) and H₂O, with an inner gold–palladium capsule containing hydrous melt, this study was able to compare the oxygen fugacity imposed by the outer capsule oxygen buffer with an oxygen fugacity estimated by the AuPdFe ternary system calibrated by Barr and Grove (Contrib Miner Petrol 160(5):631–643, 2010). H₂O loss or gain, as well as iron loss to the capsule walls and carbon contamination, is often observed in piston-cylinder experiments and often go unexplained. Only a few have attempted to actually quantify various aspects of these changes (Brooker et al. in Am Miner 83(9–10):985–994, 1998; Truckenbrodt and Johannes in Am Miner 84:1333–1335, 1999). It was one of the goals of Jakobsson (Contrib Miner Petrol 164(3):397–407, 2012) to address these issues by using and testing the AuPdFe solution model of Barr and Grove (Contrib Miner Petrol 160(5):631–643, 2010), as well as to constrain the oxygen fugacity of the inner capsule. The oxygen fugacities of the analyzed melts were assumed to be equal to those of the solid Ni–NiO and Co–CoO buffers, which is incorrect since the melts are all undersaturated in H₂O and the oxygen fugacities should therefore be lower than that of the buffer by 2 log $a_{{{\text{H}}_{ 2} {\text{O}}}}$ .     

The Late Pleistocene Afton Lodge Clay Formation,Ayrshire, Scotland: evidence for Early to Middle Devensian climatic changes and Late Devensian onshore ice flow and rafting from the Firth of Clyde

An investigation into the late Pleistocene sediments exposed at Afton Lodge has helped to clarify the glacial history of western central Scotland. The sequence includes several allochthonous bodies of ‘shelly clay’ (Afton Lodge Clay Formation) associated with Late Devensian (Weichselian) age diamict. The shelly clay contains abundant marine macro- and microfauna, as well as palynomorphs consistent with its deposition within a shallow marine to estuarine environment. Faunal changes within the main body of marine clay record at least one, millennial-scale cycle of Arctic-Boreal, to Boreal, and back to Arctic-Boreal climatic conditions. A radiocarbon date of over 41 ka ¹⁴C BP obtained from the foraminifera indicates that the marine clays are older than the surrounding till. Afton Lodge is thus one of a suite of ‘high-level’ shelly clay occurrences around the Scottish coasts that are now considered to be glacially transported. Together with closely associated ‘shelly tills’, the rafts were emplaced during an early phase of the last glaciation by ice flowing from the western Grampian Highlands of Scotland through the topographically-confined Firth of Clyde basin. The blocks of marine sediment were detached subglacially, unfrozen, and carried at least 10 km by ice that splayed out onshore against reversed slopes favouring raft emplacement and the creation of closely associated ribbed moraine. Transport of the rafts was facilitated by water-lubricated décollement surfaces and their accretion was accompanied by dewatering. The shelly tills were formed mainly by the attenuation and crushing of rafts of shelly clay during their transport within the subglacial deforming bed.