A 15-month study of zooplankton ingestion by farmed mussels (Mytilus edulis) in Bantry Bay, Southwest Ireland

There is a growing body of evidence to suggest that bivalve molluscs routinely ingest zooplankton. To elucidate further these observations, a 15-month study of zooplankton ingestion by farmed mussels was conducted using mussel long-lines in Bantry Bay, Ireland. Stomach content analysis of the mussels showed that there was evidence of zooplankton ingestion throughout the sampling period, but that highest mean numbers of zooplankters were ingested by mussels in the spring and summer months. Various zooplankton species were present in mussel stomachs. Harpacticoid copepods were found more often in stomach contents than calanoid copepods, probably due to their proximity to the bivalves' inhalent siphons. Barnacle cyprids featured in large numbers in stomach contents, but only for a period of 3 months which broadly corresponded with their pelagic phase. Sizes of ingested zooplankton ranged from 126 μm to 6 mm, but more of the smaller zooplankters (e.g. crustacean nauplii) were ingested. When lengths of ingested copepods were compared with those found in plankton net samples, it was found that the net-sampled copepods were significantly larger than those found in mussel stomachs, suggesting that mussels select for smaller categories within the zooplankton available to them. Soft bodied zooplankton was rarely found in mussel stomachs but their absence may be due to rapid digestion or they may have been destroyed in the preservation process. Ingestion of zooplankton by bivalves is discussed in the context of the impacts mussel farms have on resident zooplankton populations.     

A note on ocean surface drift with application to surface velocities measured with HF Radar

The ocean drift current consists of a (local) pure drift current generated by the interaction of wind and waves at the sea surface, to which the surface geostrophic current is added vectorially. We present (a) a similarity solution for the wave boundary layer (which has been validated through the prediction of the 10-m drag law), from which the component of pure drift current along the direction of the wind (and hence the speed factor) can be evaluated from the 10-m wind speed and the peak wave period, and (b) a similarity solution for the Ekman layers of the two fluids, which shows that under steady-state neutral conditions the pure drift current lies along the direction of the geostrophic wind, and has a magnitude 0.034 that of the geostrophic wind speed. The co-existence of these two similarity solutions indicates that the frictional properties of the coupled air-sea system are easily evaluated functions of the 10-m wind speed and the peak wave period, and also leads to a simple expression for the angle of deflection of the pure drift current to the 10 m wind. The analysis provides a dynamical model for global ocean drift on monthly and annual time scales for which the steady-state neutral model is a good approximation. In particular, the theoretical results appear to be able to successfully predict the mean surface drift measured by HF Radar, which at present is the best technique for studying the near surface velocity profile.     

Appraisal of storm beach buffer width for cyclonic waves

The loss of beach sand from berm and dune due to high waves and surge is a universal phenomenon associated with sporadic storm activities. To protect the development in a coastal hazard zone, hard structures or coastal setback have been established in many countries around the world. In this paper, the requirement of a storm beach buffer, being a lesser extent landward comparing with the coastal setback to ensure the safety of infrastructures, is numerically assessed using the SBEACH model for three categories of wave conditions in terms of storm return period, median sand grain size, berm width, and design water level. Two of the key outputs from the numerical calculations, berm retreat and bar formation offshore, are then analysed, as well as beach profile change. After having performed a series of numerical studies on selected large wave tank (LWT) test results with monochromatic waves using SBEACH, we may conclude that: (1) Berm erosion increases and submerged bar develops further offshore as the storm return period increases for beach with a specific sand grain size, or as the sand grain reduces on a beach under the action of identical wave condition; (2) Higher storm waves yield a large bar to form quicker and subsequently cause wave breaking on the bar crest, which can reduce the wave energy and limit the extent of the eroding berm; (3) A larger buffer width is required for a beach comprising small sand grain, in order to effectively absorb storm wave energy; and (4) Empirical relationships can be tentatively proposed to estimate the storm beach buffer width, from the input of wave conditions and sediment grain size. These results would benefit a beach nourishment project for shore protection or design of a recreational beach.     

Composition and Useful Properties of Tailings of Marine Manganese Nodules and Crusts

ABSTRACT

Marine manganese nodules and crusts, when processed, yield tailings which may be utilized for environmental and economic benefit. The key to the reasonable and effective utilization of these tailings lies in making a systematic appraisal of their composition and properties. This article gives an introduction to the investigation of manganese tailings properties. The tailings have a high iron and/or manganese content, high surface area, high porosity, and fine grain size. Some tailings have a high rare earth element content which is valuable. They may also have high SO₃, arsenic, and uranium contents which are harmful. Depending on the process used to produce the tailings, there will likely be some differences in chemical composition, mineral assemblages, surface area and adsorption capability, pore diameter and volume, density and pH. In assigning potentially beneficial applications for these tailings, these differences should be taken into account to optimize utilization.     

Land‐use impacts and water quality targets in the intensive dairying catchment of the Toenepi Stream,New Zealand

Water quality monitoring in Toenepi Stream, New Zealand, started in 1995 in a study of dairy farming influences on lowland stream quality and has continued since then with brief interruptions. Surveys have provided information about changes in farm and soil management practices as they relate to environmental sustainability. Although average water quality in Toenepi Stream has changed little during 1995–2004, there have been some notable improvements. Water clarity measured by black disc has improved from 0.6m to 1.5m, and median ammonia‐N and nitrate‐N concentrations have declined by 70% and 57%, respectively. The frequency and magnitude of extreme concentrations have declined—most notably for nitrogen (N) forms, which also had decreased mean values. Specific yields for suspended solids (SS) and phosphorus (P) forms in 2002–04 were 47–67% of 1995–97 values, mainly because of lower water yields. Reduced specific yields for N forms in 2002–04 (34–37% of 1995–97 yields) were also attributable to lower mean concentrations in stream water. Faecal bacteria concentrations have not abated and are on average 2–3 times recommended guideline values for contact recreation. Fewer dairy farms and an increased proportion irrigating dairyshed effluent to land, rather than discharging it to the stream via two‐pond systems, were likely causes of improvement in water quality. Water quality targets were developed for Toenepi Stream to achieve contact recreation criteria for the Piako River (downstream) and for intrinsic habitat values for Toenepi Stream. A range of mitigation measures has been formulated to meet these targets, but substantial uptake of sustainable farming practices is needed to improve water quality in Toenepi Stream.     

Assessing the Measurement Consistency Between the Jason-2/AMR and SARAL/AltiKa/DFMR Microwave Radiometers Using Simultaneous Nadir Observations

SARAL/AltiKa has a Dual Frequency Microwave Radiometer (DFMR), and Jason-2 has an Advanced Microwave Radiometer (AMR). Both microwave radiometer sensors include a 23.8 GHz primary water sensing channel. The measurement consistencies between DFMR and AMR are important for establishing a consistent altimetry data set between SARAL/AltiKa and Jason-2 in order to accurately assess sea level rise in a long-term time series. This study investigates the measurement consistency in the 23.8 GHz channel between DFMR and AMR at the Simultaneous Nadir Overpasses (SNO's) between the two satellites and also at coldest ocean brightness temperature locations. Preliminary results show that while both instruments show no significant trends over the one year since the launch of SARAL, a consistent relative bias of 2.88 K (DFMR higher than AMR) with a standard deviation of 0.98 K is observed. The relative bias at the lowest brightness temperature from the SNO method (-3.82 K) is consistent with that calculated from coldest ocean method (-3.74 K). The relative bias exhibits strong latitude (and scene temperature) dependency, changing from -3.82 K at high latitudes to -0.92 K near the equator. There also exists an asymmetry between the northern and southern hemisphere. The relative bias increases toward the lower end of brightness temperature.     

Reconstructing historic Glacial Lake Outburst Floods through numerical modelling and geomorphological assessment: Extreme events in the Himalaya

Recession of high‐mountain glaciers in response to climatic change frequently results in the development of moraine‐dammed glacial lakes. Moraine dam failure is often accompanied by the release of large volumes of water and sediment, termed a Glacial Lake Outburst Flood (GLOF). Chukhung Glacier is a small (~3 km²) receding valley glacier in Mt. Everest (Sagarmatha) National Park, Nepal. Unlike many Himalayan glaciers, which possess a thick mantle of supraglacial debris, its surface is relatively clean. The glacier terminus has receded 1.3 km from its maximum Holocene position, and in doing so provided the space for an ice‐contact moraine‐dammed lake to develop. The lake had a maximum volume of 5.5 × 10⁵ m³ and drained as a result of breaching of the terminal moraine. An estimated 1.3 × 10⁵ m³ of material was removed from the terminal moraine during breach development. Numerical dam‐breach modelling, implemented within a Generalised Likelihood Uncertainty Estimation (GLUE) framework, was used to investigate a range of moraine‐dam failure scenarios. Reconstructed outflow peak discharges, including failure via overtopping and piping mechanisms, are in the range 146–2200 m³ s^‐1. Results from two‐dimensional hydrodynamic GLOF modelling indicate that maximum local flow depths may have exceeded 9 m, with maximum flow velocities exceeding 20 m s^‐1 within 700 m of the breach. The floodwaters mobilised a significant amount of material, sourced mostly from the expanding breach, forming a 300 m long and 100 m wide debris fan originating at the breach exit. moraine‐dam. These results also suggest that inundation of the entire floodplain may have been achieved within ten minutes of initial breach development, suggesting that debris fan development was rapid. We discuss the key glaciological and geomorphological factors that have determined the evolution of a hazardous moraine‐dammed lake complex and the subsequent generation of a GLOF and its geomorphological impact. © 2014 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

The Development of Laser Ablation ICP-MS and Calibration Strategies: Examples from the Analysis of Trace Elements in Volcanic Glass Shards and Sulfide Minerals

This contribution presents a review of the recent developments in laser ablation inductively coupled plasma-mass spectrometry. We describe the important developments which have occurred in the laser systems used, leading to a spatial resolution of around 20 (im, and give an overview of the major instrument developments which have affected the geological applications of laser ablation ICP-MS. We describe the calibration of laser ablation for the analysis of trace elements in two different matrices: volcanic glass shards and sulfide minerals. We show how single glass shards can be analysed using the National Institute of Standards and Technology (NIST) glass certified reference materials for calibration and demonstrate the effect of using single spot analyses compared to rastering of the calibration sample. We show the importance of inter-shard variation and demonstrate that averaged single shard analyses produce data which compare well with bulk analyses. The calibration of the laser system for sulfide mineral analysis is discussed and two different strategies are proposed, one using spiked pressed powder pellets of sulfides and the other metal reference materials. We present conclusions and recommendations for the calibration of laser ablation ICP-MS instruments.     

Laboratory and case studies of thermal cycling and stored strain on the stability of selected marbles

Studies of marble panels from the exterior of two buildings document the processes leading to bowing of the material. Bowing of panels is most extensive in those areas that are exposed to direct or reflected thermal energy. The thermal anisotropic behavior of calcite results in grain-boundary separation, grain sliding and microfracturing. The resulting loss of strength is one factor leading to bowing. The development of bows further reduces the panel strength as the outer portions elongate by inelastic deformation mechanisms. Laboratory experiments cycling marble samples for over 200 cycles at three temperatures up to 107°C above room conditions show similar strength losses as the natural situation. The second factor contributing to the bowing process is the release of residual elastic strain. The strain is in part stored in the marble from its geologic history, but may also be accumulated during thermal cycling due to the properties of calcite. Marble panels have been found to bow when stored outside, but not attached to any framework, indicating that the release of residual strain is a critical factor in producing the bows.     

Experimental studies of oxygen isotope fractionation in the carbonic acid system at 15°, 25°, and 40°C

In light of recent studies that show oxygen isotope fractionation in carbonate minerals to be a function of HCO₃⁻ and CO₃²⁻ concentrations, the oxygen isotope fractionation and exchange between water and components of the carbonic acid system (HCO₃⁻, CO₃²⁻, and CO_2(aq)) were investigated at 15°, 25°, and 40°C. To investigate oxygen isotope exchange between HCO₃⁻, CO₃²⁻, and H₂O, NaHCO₃ solutions were prepared and the pH was adjusted over a range of 2 to 12 by the addition of small amounts of HCl or NaOH. After thermal, chemical, and isotopic equilibrium was attained, BaCl₂ was added to the NaHCO₃ solutions. This resulted in immediate BaCO₃ precipitation; thus, recording the isotopic composition of the dissolved inorganic carbon (DIC). Data from experiments at 15°, 25°, and 40°C (1 atm) show that the oxygen isotope fractionation between HCO₃⁻ and H₂O as a function of temperature is governed by the equation: