CO2 cycling in the coastal ocean. I – A numerical analysis of the southeastern Bering Sea with applications to the Chukchi Sea and the northern Gulf of Mexico

A quasi-two dimensional model of the carbon and nitrogen cycling above the 70m isobath of the southeastern Bering Sea at 57°N replicates the observed seasonal cycles of nitrate, ammonium, ΣCO₂, pCO₂, light penetration, chlorophyll, phytoplankton growth rate, and primary production, as constrained by changes in wind, incident radiation, temperature, ice cover, vertical and lateral mixing, grazing stress, benthic processing of phytodetritus and zooplankton fecal pellets, and the pelagic microbial loop of DOC, bacteria, and their predators. About half of the seasonal resupply of nitrate stocks to their initial winter conditions is derived from in situ nitrification, with the rest obtained from deep-sea influxes. Under the present conditions of atmospheric forcing, shelf-break exchange, and food web structure, this shelf ecosystem serves as a sink for atmospheric CO₂, with storage in the forms of exported DOC, DIC, and unutilized POC (phytoplankton, bacteria, and fecal pellets).As a consequence of just the rising levels of atmospheric pCO₂ since the the Industrial Revolution, however, the biophysical CO₂ status of the Southeastern Bering Sea shelf may have switched over the last 250 years, from a prior source to the present sink, since this relatively pristine ecosystem has unergone little eutrophication. Such fluctuations of CO₂ status may thus be reversed by the physical processes of : (1) reduction of atmospheric pCO₂, (2) increased on welling of deep-sea ΣCO₂, and (3) warming of shelf waters. Based on our application of this model to the Chukchi Sea and the Gulf of Mexico, about 1.0–1.2 gigatons C y^-1 of atmospheric CO₂ may now be sequestered by temperate and polar shelf ecosystems. When tropical systems are included, however, a positive net sink of only 0.6–0.8. × 10¹⁵g C y⁻¹ may prevail over all shelves.     

Foraminifera from the continental slope off Cape Hatteras, North Carolina

The recent benthic meiofaunal foraminiferal assemblage from the continental slope (590-2 003 m) off Cape Hatteras, North Carolina exhibits high species richness and evenness, moderate diversity values, and lacks numerically dominant species. The preserved planktic assemblage has relatively low species richness, high evenness, low diversity, and a few numerically dominant species. Approximately 9% of the benthic species are those that typically live within continental shelf depth ranges. The benthic assemblage abundances and diversities do not follow depth patterns or geophysical characteristics. No biogeographic boundary can be described within the study area for meiofaunal foraminifera. Oxygen limitation does not appear to be a factor affecting the benthos of the North Carolina continental slope based upon the community structure of the benthic foraminifera, if total assemblage is assumed to reflect the recently living community. The high carbonate content of sediments in the area may be explained by foraminiferal tests. Within the study area, the foraminiferal assemblages are uniform, and probably reflect relative consistency of primary environmental variables as well as dynamic downslope transport and high influx of material from the water column in the vicinity where the Gulf Stream and the Western Boundary Undercurrent cross.     

Aquatic surface microlayer contamination in chesapeake bay

The aquatic surface microlayer (SMIC), 50 μm thick, serves as a concentration point for metal and organic contaminants that have low water solubility or are associated with floatable particles. Also, the eggs and larvae of many fish and shellfish species float on, or come in contact with, the water surface throughout their early development. The objectives of this study were (1) to determine the present degree of aquatic surface microlayer pollution at selected sites in Chesapeake Bay, and (2) to provide a preliminary evaluation of sources contributing to any observed contamination.Twelve stations located in urban bays, major rivers, and the north central bay were sampled three times, each at 5-day intervals during May 1986. Samples of 1.4–4.1 each were collected from the upper 30–60-μm water surface (surface microlayer, SMIC) using a Teflon-coated rotating drum microlayer sampler. One sample of subsurface water was collected in the central bay.At all stations, concentrations of metals, alkanes, and aromatic hydrocarbons in the SMIC were high compared with one bulk-water sample and with typical concentrations in water of Chesapeake Bay and elsewhere. SMIC contamination varied greatly among the three sampling times, but high mean contaminant levels (total polycyclic aromatic hydrocarbons, 1.9–6.2 μg 1⁻¹; Pb, 4.9–24 μg 1⁻¹; Cu, 4–16 μg 1⁻¹; and Zn, 34–59 μg 1⁻¹) were found at the upper Potomac and northern bay sites. Three separate areas were identified on the basis of relative concentrations of different aromatic hydrocarbons in SMIC samples - the northern bay, the Potomac River, and the cleaner southern and eastern portions of the sampling area.Suspected sources of surface contamination include gasoline and diesel fuel combustion, coal combustion, and petroleum product releases. Concentrations of metals and hydrocarbons, at approximately half the stations sampled, are sufficient to pose a threat to the reproductive stages of some fish and shellfish. Sampling and analysis of the surface microlayer provides a sensitive tool for source identification and monitoring of potentially harmful aquatic pollution.     

Composition and Useful Properties of Tailings of Marine Manganese Nodules and Crusts

Marine manganese nodules and crusts, when processed, yield tailings which may be utilized for environmental and economic benefit. The key to the reasonable and effective utilization of these tailings lies in making a systematic appraisal of their composition and properties. This article gives an introduction to the investigation of manganese tailings properties. The tailings have a high iron and/or manganese content, high surface area, high porosity, and fine grain size. Some tailings have a high rare earth element content which is valuable. They may also have high SO₃, arsenic, and uranium contents which are harmful. Depending on the process used to produce the tailings, there will likely be some differences in chemical composition, mineral assemblages, surface area and adsorption capability, pore diameter and volume, density and pH. In assigning potentially beneficial applications for these tailings, these differences should be taken into account to optimize utilization.     

Baroclinic Buoyancy-Inertia Joint Stability Parameter

At present, the barotropic buoyant stability parameter has been derived from a vertical virtual displacement of a water parcel. The barotropic inertial stability parameter in the eccentrically cyclogeostrophic, basic current field was derived in 2003 from a horizontal cross-stream virtual displacement of a parcel. By expressing acceleration of a parcel due to a virtual displacement, which is arbitrarily sloping within a vertical section across the basic current, in terms of natural coordinates, we derived the vertical component of baroclinic buoyant stability parameter B ₂ ², the horizontal component of baroclinic inertial stability parameter I ₂ ², the baroclinic joint stability parameter J ², its buoyant component B ² and its inertial component I ². B ² is far greater than I ₂ ², and when neglecting relative vorticity except for vertical shear, a downward convex curve of J ² plotted against the slope of a virtual displacement follows a trend of B ² curve. If a parcel displaces along a horizontal surface or an isopycnal surface, however, B ² vanishes, and J ² becomes equal to I ². Actual parcel is apt to displace not only along the bottom slope, but also along the sea surface and an isopycnal interfacial surface, which is approximately equivalent to an isentropic surface, preferred by lateral mixing and exchange of momentum. Such actual displacement makes B ² vanishing, and grants I ² an important role. The present analysis of I ² examining effects due to curvature and horizontal and vertical shear vorticities are useful in deepening our understanding of baroclinic instability in actual oceanic streams.     

Preconditioned Optimizing Utility for Large-dimensional analyses (POpULar)

I present the derivation of the Preconditioned Optimizing Utility for Large-dimensional analyses (POpULar), which is developed for adopting a non-diagonal background error covariance matrix in nonlinear variational analyses (i.e., analyses employing a non-quadratic cost function). POpULar is based on the idea of a linear preconditioned conjugate gradient method widely adopted in ocean data assimilation systems. POpULar uses the background error covariance matrix as a preconditioner without any decomposition of the matrix. This preconditioning accelerates the convergence. Moreover, the inverse of the matrix is not required. POpULar therefore allows us easily to handle the correlations among deviations of control variables (i.e., the variables which will be analyzed) from their background in nonlinear problems. In order to demonstrate the usefulness of POpULar, we illustrate two effects which are often neglected in studies of ocean data assimilation before. One is the effect of correlations among the deviations of control variables in an adjoint analysis. The other is the nonlinear effect of sea surface dynamic height calculation required when sea surface height observation is employed in a three-dimensional ocean analysis. As the results, these effects are not so small to neglect.     

Long-range aircraft as an Arctic Oceanographic platform

Synoptic basin-wide measurements of Arctic Ocean temperature and salinity are now possible with the recent development of an expendable conductivity, temperature, and depth probe for deployment from aircraft (AXCTD). Both the P-3 Orion aircraft and the C-130 aircraft are capable of long-range, low-altitude flight and are ideal for Arctic research. Expendable profilers can be quickly deployed over vast regions from aircraft and in locations with limited ship access, but have the disadvantage of measuring only the top 1000 m and of being about an order of magnitude less accurate than a CTD cast, primarily because of noisy salinity measurements and depth-fall rate errors. We explore how to conduct an ACXTD measurement program in ice-covered seas and discuss a test of these methods conducted in the Arctic Ocean's Eurasian Basin. Long-range aircraft can significantly augment the present program of Arctic research by performing large-area surveys, continuing time series with repeat measurements, and by helping target locations for more detailed and accurate shipboard measurement.     

Groundwater supply and demand from southern Africa’s crystalline basement aquifer: evidence from Malawi

Failure of borehole sources in weathered and fractured crystalline basement aquifers in Malawi in southern Africa has been linked with poor borehole design, mechanical failure and badly sited boreholes. However, recent work in Malawi indicates that demand may now exceed long-term resource potential in some places and that this is also a cause of water point failure. An 11-year climate cycle (including a wet and dry period) necessitates overdraft from groundwater storage during the dry-cycle years before episodic rainfall events in the wetter part of the cycle again recharge the aquifers. Data, particularly groundwater hydrograph data, are sparse, but sufficient to evaluate the long-term renewable groundwater potential for both fractured and weathered basement-aquifer types in each of the 15 management areas in Malawi. The groundwater potential or long-term renewable resource (recharge) is given by the sum of Darcian throughflow and dry-season depletion of storage. Estimated rural demand exceeds the renewable resource in the fractured-rock aquifer in two management units and in the weathered-rock aquifer in two other units. Although there is inherent uncertainty in the water-balance estimates, the likelihood that rural demand is exceeding long-term average recharge in some areas is cause for concern.     

Screening and ranking framework for geologic CO<Subscript>2</Subscript> storage site selection on the basis of health,safety, and environmental risk

A screening and ranking framework (SRF) has been developed to evaluate potential geologic carbon dioxide (CO₂) storage sites on the basis of health, safety, and environmental (HSE) risk arising from CO₂ leakage. The approach is based on the assumption that CO₂ leakage risk is dependent on three basic characteristics of a geologic CO₂ storage site: (1) the potential for primary containment by the target formation; (2) the potential for secondary containment if the primary formation leaks; and (3) the potential for attenuation and dispersion of leaking CO₂ if the primary formation leaks and secondary containment fails. The framework is implemented in a spreadsheet in which users enter numerical scores representing expert opinions or published information along with estimates of uncertainty. Applications to three sites in California demonstrate the approach. Refinements and extensions are possible through the use of more detailed data or model results in place of property proxies.