Early Palaeozoic deep subduction of continental crust in the Kyrgyz North Tianshan: evidence from Lu–Hf garnet geochronology and petrology of mafic dikes

High-pressure and ultrahigh-pressure (UHP) eclogite-bearing metamorphic assemblages in the North Tianshan of Kyrgyzstan are known from the Aktyuz and Makbal areas, where eclogites and garnet amphibolites are associated with continental rocks such as granitoid gneisses in Aktyuz and shallow-water clastic (passive margin?) metasediments in Makbal. We present the first Lu–Hf isotope data for an eclogite and two garnet amphibolite samples from the two metamorphic terranes which, combined with petrological analysis, tightly constrain the age of high-pressure metamorphism in the Kyrgyz North Tianshan. A five-point isochron for an Aktyuz eclogite sample provides a Lu–Hf age of 474.3 ± 2.2 Ma, and a four-point isochron on a Makbal sample corresponds to 470.1 ± 2.5 Ma. A prograde, subduction-related path is inferred for both samples with peak P–T conditions ranging from 1.4 to 1.6 GPa and 610–620 °C. A further Makbal sample provided a significantly older Lu–Hf age of 486 ± 5.4 Ma, most likely due to late alteration in the sample (late addition of unradiogenic Hf). We conclude that garnet growth in all three samples occurred around ca. 474 Ma and that these rocks likely experienced UHP metamorphism contemporaneously. Our results support previous geochronological evidence for an Early Ordovician collision belt in the North Tianshan and allow refinement of a tectonic model involving subduction of thinned continental crust to considerable depth along the margin of a small microcontinent.     

The Ledsjö end moraine—a subaquatic push moraine composed of glaciomarine clay in central Sweden

During the Younger Dryas cold event, the Scandinavian ice sheet readvanced in southwest Sweden and formed the Middle Swedish end-moraine zone (MSEMZ). Recent highway construction near Skara has created an exposure through the prominent ridge at Ledsjö. Through sketching and measurement of structural information, we have documented the internal character of the Ledsjö moraine. The moraine consists predominantly of clay with numerous sand pods and lenses, which show undeformed, brittle deformed, or fluidized structures. Based on geomorphology and structural geology, it is clear the moraine was made during two advances. As ice advanced, proglacial marine clay was subglacially mobilized by the ice and extruded at the ice margin forming a ramp of debris-flow sediment. Contemporaneously, subglacial meltwater transported sand to the margin, where the meltwater became a buoyant plume, and sand was deposited near the ice margin by currents moving away from as well as toward the ice margin. These processes resulted in interbedded sand and clay. Continued advance of the ice margin deformed this package and further pushed the assemblage into a ridge form with gravity sliding of portions of the ridge. Prior to the second advance, sand was deposited on the proximal side of the initial ridge. During readvance, this sand was thrust faulted and intruded by mobilized clay. Up ice of the intruded sands, subglacial, extensional deformation created a complex shear zone of faulted sand and clay. The Ledsjö moraine represents a subaerial example of submarine push moraines like the submerged moraines recently documented in Svalbard.     

Seismic microzonation for Muscat region,Sultanate of Oman

Natural Hazards - Site characterization was carried out for Muscat region using the ambient noise measurements applying the horizontal-to-vertical spectral ratio (HVSR) technique and using active...     

Factors affecting the Nd3+ (REE3+) luminescence of minerals

In this paper, possibilities and limits of the application of REE³⁺ luminescence (especially the Nd^{3+ 4}F_3/2 → ⁴I_9/2 emission) as structural probe are evaluated. Important factors controlling the Nd³⁺ luminescence signal are discussed, including effects of the crystal-field, crystal orientation, structural state, and temperature. Particular attention was paid to the study of the accessory minerals zircon (ZrSiO₄), xenotime–(Y) (YPO₄), monazite–(Ce) (CePO₄) and their synthetic analogues. Based on these examples we review in short that (1) REE³⁺ luminescence can be used as non-destructive phase identification method, (2) the intensities of certain luminescence bands are strongly influenced by crystal orientation effects, and (3) increased widths of REE³⁺-related emission bands are a strong indicator for structural disorder. We discuss the potential of luminescence spectroscopy, complementary to Raman spectroscopy, for the quantitative estimation of chemical (and potentially also radiation-induced) disorder. For the latter, emissions of Nd³⁺-related centres are found to be promising candidates.     

The building blocks of continental crust: Evidence for a major change in the tectonic setting of continental growth at the end of the Archean

Oceanic arcs are commonly cited as primary building blocks of continents, yet modern oceanic arcs are mostly subducted. Also, lithosphere buoyancy considerations show that oceanic arcs (even those with a felsic component) should readily subduct. With the exception of the Arabian–Nubian orogen, terranes in post-Archean accretionary orogens comprise < 10% of accreted oceanic arcs, whereas continental arcs compose 40–80% of these orogens. Nd and Hf isotopic data suggest that accretionary orogens include 40–65% juvenile crustal components, with most of these (> 50%) produced in continental arcs.Felsic igneous rocks in oceanic arcs are depleted in incompatible elements compared to average continental crust and to felsic igneous rocks from continental arcs. They have lower Th/Yb, Nb/Yb, Sr/Y and La/Yb ratios, reflecting shallow mantle sources in which garnet did not exist in the restite during melting. The bottom line of these geochemical differences is that post-Archean continental crust does not begin life in oceanic arcs. On the other hand, the remarkable similarity of incompatible element distributions in granitoids and felsic volcanics from continental arcs is consistent with continental crust being produced in continental arcs.During the Archean, however, oceanic arcs may have been thicker due to higher degrees of melting in the mantle, and oceanic lithosphere would be more buoyant. These arcs may have accreted to each other and to oceanic plateaus, a process that eventually led to the production of Archean continental crust. After the Archean, oceanic crust was thinner due to cooling of the mantle and less melt production at ocean ridges, hence, oceanic lithosphere is more subductable. Widespread propagation of plate tectonics in the late Archean may have led not only to rapid production of continental crust, but to a change in the primary site of production of continental crust, from accreted oceanic arcs and oceanic plateaus in the Archean to primarily continental arcs thereafter.     

A new Ordovician eurypterid (Arthropoda: Chelicerata) from southeast Turkey: Evidence for a cryptic Ordovician record of Eurypterida

A new species of eurypterid, Paraeurypterus anatoliensis gen. et sp. nov., is described from the Upper Ordovician (Katian) ?ort Tepe Formation of southeast Turkey. The single specimen, preserving the carapace, mesosoma and fragments of appendages, appears morphologically intermediate between the eurypteroid families Dolichopteridae and Eurypteridae. P. anatoliensis retains the plesiomorphic conditions of crescentic eyes with enlarged palpebral lobes and a quadrate carapace with ornamentation consisting of small pustules but also displaying the derived characteristics of genal facets and a row of large acicular scales across the posterior of each tergite. Phylogenetic analysis incorporating each of the major eurypterine clades and all Eurypterina having a three-segmented genital operculum (the triploperculate condition) resolves eurypteroids to be an unnatural group, with Dolichopteridae and Eurypteridae forming part of a grade leading to diploperculate Eurypterina. P. anatoliensis is intermediate between the two eurypteroid families, as is ‘Eurypterus’ minor from the Pentland Hills of Scotland, which is shown to be a distinct genus and assigned to Pentlandopterus gen. nov. Using the phylogenetic topology to infer ghost ranges for each of the major eurypterid clades reveals that the majority of eurypterid superfamilies must have originated by the Katian, indicating a largely unsampled record of Ordovician eurypterids. The occurrence of poor dispersers such as Paraeurypterus in the Ordovician of Gondwana is puzzling, and it has been suggested that they dispersed to the continent during periods of sea level lowstand in the Sandbian and Hirnantian, however this does not explain the lack of Ordovician species in North America and Europe, given the well-sampled nature of these continents, and an alternative is proposed whereby eurypterids originated in Gondwana and radiated out to Laurentia and Baltica in the late Ordovician and early Silurian, thus explaining their sudden appearance in the European and North American rock record.     

Lahnsteinite, Zn4(SO4)(OH)6 · 3H2O, a new mineral from the Friedrichssegen Mine, Germany

A new mineral, lahnsteinite, has been found in the dump of the Friedrichssegen Mine, Bad Ems district, Rhineland-Palatinate (Rheinland-Pfalz), Germany. Lahnsteinite, occurring as colorless tabular crystals in the cavities of goethite, is associated with pyromorphite, hydrozincite, quartz, and native copper. The Mohs’ hardness is 1.5; the cleavage is perfect parallel to (001). D _calc = 2.995 g/cm³, D _meas = 2.98(2) g/cm³. The IR spectrum is given. The new mineral is optically biaxial, negative, α = 1.568(2), β = 1.612(2), γ = 1.613(2), 2V _meas = 18(3)°, 2V _calc = 17°. The chemical composition (wt %, electron microprobe data; H₂O was determined by gas chromatography of ignition products) is as follows: 3.87 FeO, 1.68 CuO, 57.85 ZnO, 15.83 SO₃, 22.3 H₂O, total is 101.53. The empirical formula is (Zn_3.3Fe_0.27Cu_0.11)_Σ3.91(S_0.98O₄)(OH)₅ · 3H_2.10O. The crystal structure has been studied on a single crystal. Lahnsteinite is triclinic, space group P1, a = 8.3125(6), b = 14.545(1), c = 18.504(2) Å, α = 89.71(1), β = 90.05(1), γ = 90.13(1)°, V = 2237.2(3) ų, Z = 8. The strong reflections in the X-ray powder diffraction pattern [d, Å (I, %)] are: 9.30 (100), 4.175 (18), 3.476 (19), 3.290 (19), 2.723 (57), 2.624 (36), 2.503 (35), 1.574 (23). The mineral has been named after its type locality near the town of Lahnstein. The type specimen of lahnsteinite is deposited in the Fersman Mineralogical Museum of the Russian Academy of Sciences, Moscow, registration number 4252/1.     

Using streamflow characteristics to explore permafrost thawing in northern Swedish catchments

The recent and rapid warming of the Arctic leads to thawing of permafrost, which influences and changes subsurface water-flow systems in such landscapes. This study explores the utility of catchments as “sentinels of change” by considering long-term discharge data from 17 stations on unregulated rivers in northern Sweden and analyzing trends in annual minimum discharge and recession flow characteristics. For the catchments considered, the annual minimum discharge has increased significantly (based on the Mann Kendall test at a 95 % confidence level) in nine of the catchments and decreased significantly in one catchment. Considering changes in recession-flow characteristics, seven catchments showed significant trends consistent with permafrost thawing while two catchments showed significant trends in the opposite direction. These results are mechanistically consistent with generic physically based modeling studies and the geological setting, as the catchments considered span the spatial limit of permafrost extent. This study illuminates the potential for using hydrologic observations to monitor changes in catchment-scale permafrost. Further, this opens the door for research to isolate the mechanisms behind the different trends observed and to gauge their ability to reflect actual permafrost conditions at the catchment scale.