The Ledsjö end moraine—a subaquatic push moraine composed of glaciomarine clay in central Sweden

During the Younger Dryas cold event, the Scandinavian ice sheet readvanced in southwest Sweden and formed the Middle Swedish end-moraine zone (MSEMZ). Recent highway construction near Skara has created an exposure through the prominent ridge at Ledsjö. Through sketching and measurement of structural information, we have documented the internal character of the Ledsjö moraine. The moraine consists predominantly of clay with numerous sand pods and lenses, which show undeformed, brittle deformed, or fluidized structures. Based on geomorphology and structural geology, it is clear the moraine was made during two advances. As ice advanced, proglacial marine clay was subglacially mobilized by the ice and extruded at the ice margin forming a ramp of debris-flow sediment. Contemporaneously, subglacial meltwater transported sand to the margin, where the meltwater became a buoyant plume, and sand was deposited near the ice margin by currents moving away from as well as toward the ice margin. These processes resulted in interbedded sand and clay. Continued advance of the ice margin deformed this package and further pushed the assemblage into a ridge form with gravity sliding of portions of the ridge. Prior to the second advance, sand was deposited on the proximal side of the initial ridge. During readvance, this sand was thrust faulted and intruded by mobilized clay. Up ice of the intruded sands, subglacial, extensional deformation created a complex shear zone of faulted sand and clay. The Ledsjö moraine represents a subaerial example of submarine push moraines like the submerged moraines recently documented in Svalbard.     

Non-linear energy-frequency curves in statistics of earthquakes

Summary The linear adjustment of the energy-frequency distribution of earthquakes is critically regarded. However, it contains some faults. Therefore, the logarithmic-normal distribution is proposed for adjusting energy-frequency observations of earthquakes. The parameters of the logarithmicnormal distribution are determined from observations by the method of least squares. For many examples from different epicentral areas and different time intervals the parameters of the logarithmicnormal distribution are calculated and compared with one another. It follows that the exact shape of the energy-frequency distribution is fixed by the total energy of all earthquakes occurring per unit of time. There must be the possibility of liberating the seismic energy of 10¹³ ergs in a given epicentral area of 1000 km² during one year, so that earthquakes can really occur.Publication No. 49 of the Institut für Geodynamik, 69 Jena (GDR), Burgweg 11. Forschungs-gemeinschaft der Deutschen Akademie der Wissenschaften zu Berlin.     

Buchbesprechungen

Ohne Zusammenfassung     

Gravity anomalies over inactive fracture zones in the central North Atlantic

The basement topography and the free-air gravity along two profiles in the central North Atlantic between 16° and 25° N, crossing a number of fracture zones, were divided in three wavelength intervals. Two-dimensional modelling shows that the short wavelength (>50 km) gravity is well explained by uncompensated topography (mainly spreading topography). For the long wavelengths (>200 km) there is no correlation of topography and gravity. In principle this topography is compensated. Residual anomalies comprise the Ridge effect as well as regional anomalies related to depth anomalies. The 50 to 200km band-pass filtered topography and gravity contain relevant information on fracture zones. Models require a base of the crust that parallels the topography rather than a form of regional compensation. For an explanation of this crustal model that has the appearance of frozen in normal faults we have to consider the typical morphology as created in the transform domain. The geophysical processes that cause this morphology are still an object of study.     

New Generation of Probabilistic Seismic Hazard Assessment for the Area Cologne/Aachen Considering the Uncertainties of the Input Data

A new earthquake catalogue for central, northern and northwestern Europe with unified M_w magnitudes, in part derived from chi-square maximum likelihood regressions, forms the basis for seismic hazard calculations for the Lower Rhine Embayment. Uncertainties in the various input parameters are introduced, a detailed seismic zonation is performed and a recently developed technique for maximum expected magnitude estimation is adopted and quantified. Applying the logic tree algorithm, resulting hazard values with error estimates are obtained as fractile curves (median, 16% and 84% fractiles and mean) plotted for pga (peak ground acceleration; median values for Cologne 0.7 and 1.2 m/s² for probabilities of exceedence of 10% and 2%, respectively, in 50 years), 0.4 s (0.8 and 1.5 m/s²) and 1.0 s (0.3 and 0.5 m/s²) pseudoacclerations, and intensity (I₀ = 6.5 and 7.2). For the ground motion parameters, rock foundation is assumed. For the area near Cologne and Aachen, maps show the median and 84% fractile hazard for 2% probability of exceedence in 50 years based on pga (maximum median value about 1.5 m/s²), and 0.4 s (>2 m/s²) and 1.0 s (about 0.8 m/s²) pseudoaccelerations, all for rock. The pga 84% fractile map also has a maximum value above 2 m/s² and shows similarities with the median map for 0.4 s. In all maps, the maximum values fall within the area 6.2–6.3° E and 50.8–50.9° N, i.e., east of Aachen.     

Stable isotopes and trace elements in modern ostracod shells: implications for reconstructing past environments on the Tibetan Plateau,China

Stable isotopes and trace elements in ostracod shells have been used widely in paleolimnological investigations of past lake hydrochemistry and climate because they provide insights into past water balance and solute evolution of lakes. Regional differences in lake characteristics and species-specific element fractionation, however, do not permit generalization of results from other regions or ostracod species to the southern Tibetan Plateau, in part because most common taxa from the southern Tibetan Plateau are endemic to the area. This study evaluated relations between present-day environmental conditions and the geochemical composition of modern ostracod shells from the southern Tibetan Plateau, to assess the suitability of using shell chemistry to infer hydrological conditions. We studied nine lakes and their catchments, located along a west–east transect in the south-central part of the Tibetan Plateau. Stable oxygen and carbon isotope values and trace element concentrations in recent shells from the four most abundant ostracod species (Leucocytherella sinensis, ?Leucocythere dorsotuberosa, Limnocythere inopinata, Tonnacypris gyirongensis) were measured, together with hydrochemical properties of host waters at the time of sampling. Results revealed significant between-species differences in stable isotope fractionation and trace element incorporation into shell calcite. Stable oxygen and carbon isotope values of ostracod shells were correlated significantly with the stable isotope composition of the respective water body \( \left( {\updelta^{18} {\text{O}}_{{{\text{H}}_{ 2} {\text{O}}}} \,{\text{and }}\updelta^{13} {\text{C}}_{{{\text{H}}_{ 2} {\text{O}}}} } \right) \), reflecting salinity and productivity, respectively. Offsets between δ¹⁸O_shell and δ¹³C_shell and inorganic calcite, the latter representing isotopic equilibrium, suggest shell formation of T. gyirongensis during spring melt. L. sinensis reproduces throughout the monsoon season until September and shows several consecutive generations, and L. inopinata molts to the adult stage after the monsoon season in August/September. The influence of pore water δ¹³C was displayed by L. inopinata, suggesting shell calcification within the sediment. Mg/Ca_shell is primarily influenced by water Mg/Ca ratios and salinity and confirms the use of this shell ratio as a proxy for precipitation-evaporation balance and lake level. In addition, Sr/Ca and Ba/Ca can be used to infer changes in salinity, at least in closed-basin lakes with calcite saturation. Observed effects of water Sr/Ca and salinity on Sr/Ca incorporation are biased by the presence of aragonite precipitation in the lakes, which removes bioavailable Sr from the host water, resulting in low Sr/Ca_shell values. Changes in carbonate mineralogy affect the bioavailability of trace elements, a process that should be considered in paleoclimate reconstructions. Oxygen isotopes and Mg/Ca_shell ratios were unaffected by water temperature. Positive correlations among Fe/Ca, Mn/Ca and U/Ca in ostracod shells, and their negative correlation with δ¹³C, which reflects organic matter decay, show the potential to infer changes in redox conditions that can be used to reconstruct past oxygen supply to bottom waters and thus past water-circulation changes within lakes. The intensity of microbial activity, associated with organic matter decomposition, can be inferred from U/Ca ratios in ostracod shells. These findings highlight the value of fossil ostracod records in lake deposits for inferring paleoenvironmental conditions on the southern Tibetan Plateau.     

Crystallographic orientations of high-angle grain boundaries in dynamically recrystallized quartz: First results

The crystallography and geometry of high-angle grain boundaries from dynamically recrystallized quartz have been studied. On the basis of combined electron backscatter diffraction and universal stage measurements, the complete crystallographic orientation of the grain boundaries could be calculated. The u-stage rotation of the grain boundaries to a vertical position reveals that they are never curved but always consist of straight segments. Our results show that these segments preferentially occupy rhombohedral, trapezohedral and bipyramidal orientations, i.e., orientations in a  25–50° girdle to the c-axis. A specific, albeit low, number of segments with special crystallographic orientation, with respect to a neighbouring quartz grain, often shows another special orientation with respect to the other neighbouring grain. Preferred combinations of grain boundary orientations related to both neighbouring grains are (i) low-index rhombohedral and high index trapezohedral, (ii) low-index bipyramidal and low-index trapezohedral or high-index rhombohedral, and (iii) low-index trapezohedral and low or high index trapezohedral. In certain cases, such as at triple junctions, the boundaries occupy specific trapezohedral orientations with a constant angle to the c-axis. This argues for energy isotropy of trapezohedral planes with the same angle to the quartz c-axis. In general, good match coincidence site lattice (CSL) orientations are not preferentially occupied so that most of the studied grain boundaries represent general boundaries. The formation of straight segments in special crystallographic orientations indicates the crystallographic control and implies an energy reduction of certain general boundaries.     

Preface: Proceedings of the 5th International Symposium on Lithographic Limestone and Plattenkalk

Magmatic rocks from the pre-Mesozoic basements of the Sambuco and Maggia nappes have been dated by U–Pb zircon ages with the LA-ICPMS technique. Several magmatic events have been identified in the Sambuco nappe. The mafic banded calc-alkaline suite of Scheggia is dated at 540 Ma, an age comparable to that of mafic rocks in the Austroalpine Silvretta nappe. The Sasso Nero peraluminous augengneiss has an age of 480–470 Ma, like many other “older orthogneisses” in Alpine basement units. It hosts a large proportion of inherited zircons, which were dated around 630 Ma, a Panafrican age indicating the Gondwanan affiliation of the Sambuco basement. The calc-alkaline Matorello pluton yielded ages around 300 Ma, similar to numerous Late Carboniferous intrusions in other basement units of the Lower Penninic (Monte Leone, Antigorio, Verampio) and Helvetic domains (Gotthard and other External Crystalline Massifs). Associated lamprophyric dykes are slightly younger (300–290 Ma), like similar dykes sampled in gneiss blocks included in the sedimentary cover of the underlying Antigorio nappe (290–285 Ma). The Cocco granodiorite and Rüscada leucogranite, both intruding the basement of the neighbouring Maggia nappe, yielded ages of ca. 300–310 Ma, identical within errors to the age of the Matorello pluton. They are significantly older than former age determinations. This age coincidence, coupled with remarkable petrologic similarities between the Cocco and Matorello granodiorites, strongly suggests paleogeographic proximity of the Sambuco and Maggia nappes in Late Carboniferous times. In recent publications these two nappes have been interpreted as belonging to distinct Mesozoic paleogeographic domains: “European” for Sambuco and “Briançonnais” for Maggia, separated by the “Valais” oceanic basin. In this case, the similarity of the Matorello and Cocco intrusions would demonstrate the absence of any significant transcurrent movement between these two continental domains. Alternatively, according to a more traditional view, Sambuco and Maggia might belong to a single large Alpine tectonic unit.     

Combined three-dimensional electric and seismic tomography study on the Åknes rockslide in western Norway

We present a combined 3-D geoelectric and seismic tomography study conducted on the large Åknes rockslide in western Norway. Movements on the slope are strongly influenced by water infiltration, such that the hydrogeological regime is considered as a critical factor affecting the slope stability. The aim of our combined geophysical study was to identify and visualize the main shallow tension fractures and to determine their effect on hydraulic processes by comparing the geophysical results with information from borehole logging and tracer tests. To resolve the complex subsurface conditions of the highly fractured rock mass, a three-dimensional set-up was chosen for our seismic survey. To map the water distribution within the rock mass, a pattern of nine intersecting 2-D geoelectric profiles covered the complete unstable slope. Six of them that crossed the seismic survey area were considered as a single data set in a 3-D inversion. For both methods, smoothing-constraint inversion algorithms were used, and the forward calculations and parameterizations were based on unstructured triangular meshes. A pair of parallel shallow low-velocity anomalies (< 1400 m/s) observed in the final seismic tomogram was immediately underlain by two anomalies with resistivities <13 kΩm in the resistivity tomogram. In combination with borehole logging results, the low-velocity and resistivity anomalies could be associated with the drained and water-filled part of the tension fractures, respectively. There were indications from impeller flowmeter measurements and tracer tests that such tension fractures intersected several other water-filled fractures and were responsible for distinct changes of the main groundwater flow paths.