Underground Temperature Measurements as a Tool for Volcanic Activity Monitoring in the Island of Tenerife, Canary Islands

The spatial distribution of groundwater temperatures in the volcanic island of Tenerife, Canary Islands, has been inferred through measurements of water temperatures collected in the vast network of wells and subhorizontal tunnels, locally called “galleries,” which constitutes the main water supply of the island. The spatial coverage of the network of galleries allows us to reach from depth almost any geological feature of the island. The complex spatial distribution of temperatures in the interior of Tenerife is the result of the complex geological evolution of the island. Groundwater temperatures are greatly affected by groundwater flow and are considerably warmer in those galleries located in areas where water circulation is reduced due to the low permeability of materials and/or to the low infiltration rate of cooling meteoric water. In this sense, groundwater temperature should be characterized in quiescent conditions (background level), in order to facilitate monitoring changes in heat flow, such as those induced by ascending gases expected with an increase in volcanic activity.     

Stable Atmospheric Boundary-Layer Experiment in Spain (SABLES 98): A Report

This paper describes the Stable AtmosphericBoundary Layer Experiment in Spain (SABLES 98),which took place over the northern Spanish plateaucomprising relatively flat grassland,in September 1998. The main objectives of the campaign were to study the properties of themid-latitude stable boundary layer (SBL).Instrumentation deployed on two meteorologicalmasts (of heights 10 m and 100 m)included five sonic anemometers, 15 thermocouples,five cup anemometers and three propeller anemometers,humidity sensors and radiometers.A Sensitron mini-sodar and a tetheredballoon were also operated continuously. Atriangular array of cup anemometers wasinstalled to allow the detection ofwave events. Two nocturnal periods analysedon 14–15 and 20–21 September are used toillustrate the wide-ranging characteristics of the SBL.     

A mass transfer model of bauxite formation

The formation of bauxite due to weathering of a granitic protolith has been simulated by means of a one-dimensional flow and reaction model based on the mass transfer principle. The model couples mineral dissolution and precipitation reactions, speciation in solution, and advective solute transport in a porous medium. A very important aspect of the modeling study is the use of mineral reaction rates determined experimentally in the laboratory. The important effects of solution saturation state and pH have been incorporated into the kinetic rate laws governing the heterogeneous reactions. The values of these parameters have been obtained from the scientific literature to guarantee that realistic reaction rates are used in the simulations. Albite and quartz are the minerals that make up the parent rock in the model. Gibbsite, kaolinite, and a Na-mica (as a surrogate for smectite) are the secondary minerals that have been taken into account. Long-term simulations (>1 Ma) have been run, and the formation of a bauxitic profile, with an upper gibbsite-rich and a lower kaolinite-rich zone, is predicted. In early stages of the process (up to a few hundreds of thousands of years), both gibbsite and kaolinite precipitate directly from solution as a consequence of albite dissolution. In later stages, the bulk of gibbsite precipitation derives from the incongruent dissolution of kaolinite, while kaolinite precipitation is still caused by the dissolution of albite. This is also reflected by the formation of two reaction fronts in the profile. These results are compared with weathering sequences from the Los Pijiguaos bauxite deposit, Venezuela. The overlap between the gibbsite and kaolinite zones and the replacement of kaolinite by gibbsite are consistent with model calculations. Mechanical denudation has to be called upon to explain the limited thicknesses of the weathering profiles in the field. The role of mechanical erosion is supported by the presence of microsedimentary structures in the bauxite and the balance between dissolved and suspended loads in the streams draining the area.     

A matrix representation of the potential second-rank gradient tensor for local modelling

Summary. This paper introduces a new matrix computational approach to the local determination of gravity gradients, convenient for comparing with gradient signals from moving base gradiometer systems or calculating topographic effects at instrument heights. The method represents a practical alternative to the more conventional spherical harmonics formulation, primarily global in nature, and it may be considered as an extension to other previously used local representations, such as point masses. Important characteristics of the analytical development outlined herein are its conceptual simplicity and the possibility of obtaining at once, up to a certain order n , and in an arbitrary Cartesian coordinate system, the symmetric point gradient tensor of second rank.     

Geochemical characterization of heavy metal contaminated area using multivariate factorial kriging

This paper describes a geostatistical method, known as factorial kriging analysis, which is well suited for analyzing multivariate spatial information. The method involves multivariate variogram modeling, principal component analysis, and cokriging. It uses several separate correlation structures, each corresponding to a specific spatial scale, and yields a set of regionalized factors summarizing the main features of the data for each spatial scale. This method is applied to an area of high manganese-ore mining activity in Amapá State, North Brazil. Two scales of spatial variation (0.33 and 2.0 km) are identified and interpreted. The results indicate that, for the short-range structure, manganese, arsenic, iron, and cadmium are associated with human activities due to the mining work, while for the long-range structure, the high aluminum, selenium, copper, and lead concentrations, seem to be related to the natural environment. At each scale, the correlation structure is analyzed, and regionalized factors are estimated by cokriging and then mapped.     

Gold-bearing hedenbergite skarns from the SW contact of the Andorra granite (Central Pyrenees, Spain)

Several varieties of skarn outcrop have been found to develop along the contact between the Andorra granite and the Devonian limestones. The skarns contain variable amounts of gold ranging up to 5 g/t, always associated with sulphides. The sulphides in the skarn include arsenopyrite and pyrrhotite with lesser amounts of chalcopyrite, galena, sphalerite and Bi-minerals. Geothermometric and geobarometric data indicate the skarns formed at about 2 kbar and temperatures ranging from 500 ° to 350 °C from CO₂-free polysaline brines at a slightly acidic pH and oxygen fugacity which decreases with time from the pyrite-pyrrhotite-magnetite towards the QFM buffer. Available data on gold solubility suggest that sufficient quantities of gold to form an ore deposit could have been transported as AuCl ₂ ^- at the high temperatures and salinities under which the skarns formed. Both gold deposition and sulphide precipitation could have occurred due to a decrease in temperature and/or oxygen fugacity.     

U-Pb age and lead isotopic characterization of Au-bearing skarn related to the Andorra granite (central Pyrenees,Spain)

Auriferous skarns are associated with post- and late-kinematic Hercynian granites that intruded into Cambro-Ordovician to Devonian sediments of the central Pyrenees. We determined the age of the Andorra granite and the associated skarn at 305 ± 3 Ma by U-Pb dating titanite from the endo-skarn. The sulfur isotopic composition from sulfides in the skarn (Cardellach et al. 1992) shows a significant variation with isotopically light sulfur (³⁴S +3) in the barren skarns and heavy sulfur (³⁴S +11) in the gold-bearing skarns. Outwards, it increasingly resembles sulfur from arsenopyrite disseminations in the Cambro-Ordovician sediments. The lead isotopic composition from sulfides of the skarns is very homogeneous (²⁰⁶Pb/²⁰⁴Pb = 18.410, ²⁰⁷Pb/²⁰⁴Pb = 15.699, ²⁰⁸Pb/²⁰⁴Pb = 38.574) in contrast to the one in gold-bearing arsenopyrite veins and in arsenopyrite disseminations in the sediments (e.g. ²⁰⁶Pb/²⁰⁴Pb varies from 18.54 to 30.36). Combined, sulfur and lead isotope data indicate that the lead in the skarn is dominantly derived from the granite, whereas the sulfur is derived at variable portions from both the granite and the sediments.     

Suitability of GNSS for analysis of soil subsidence in Recife in a highly urbanized coastal area

Natural Hazards - Recife Metropolitan Region, in the northeast of Brazil, is formed by a coastal plain bounded by hills and by the Atlantic Ocean. Recife Metropolitan Region has about 4 million...