North-south transfer zones and paleo-morphological reconstruction of the Xylokastro area (Corinth Gulf, Greece)

A large number of studies have documented the structural and sedimentary architecture of the Corinth Gulf, especially the major E–W trending normal faults important in accommodating the main extensional strain and associated growth of the Gilbert fan deltas. However, the role of several N–S oriented structures that crop out at the surface and are detectable at depth by seismic reflection and gravity surveys are not clearly understood. Based on new geological data, collected near Xylokastro, we describe the N–S oriented tectonic activity of this area. The mapped inland faults correspond to off-shore structures identified in re-interpreted seismic lines and appear to have acted as a major transfer zone during the opening of the Corinth Gulf. Reconstruction of the paleo-topography based on sedimentary facies and the environment of clay mineral formation suggest these transfer zones played an important role in controlling both local structural relief and depositional conditions of the Gilbert fan deltas.     

Zircon fission‐track ages from Newfoundland—A proxy for high geothermal gradients and exhumation before opening of the Central Atlantic Ocean

Following Appalachian orogenesis, metamorphic rocks in central Newfoundland were exhumed and reburied under Tournaisian strata. New zircon fission‐track (ZFT) ages of metamorphic rocks below the Tournaisian unconformity yield post‐depositionally reset ages of 212–235 Ma indicating regional fluid‐absent reheating to at least ≥220°C. Post‐Tournaisian sedimentary thicknesses in surrounding basins show that burial alone cannot explain such temperatures, thus requiring that palaeo‐geothermal gradients increased to ≥30–40°C/km before final late Triassic accelerated cooling. We attribute these elevated palaeo‐geothermal gradients to localized thermal blanketing by insulating sediments overlying radiogenic high‐heat‐producing granitoids. Late Triassic rifting and magmatism before break up of Pangaea likely also contributed to elevated heat flow, as well as uplift, triggering late Triassic accelerated cooling and exhumation. Thermochronological ages of 240–200 Ma are seen throughout Atlantic Canada, and record rifting and basaltic magmatism on the conjugate margins of the Central Atlantic Ocean preceding the onset of oceanic spreading at ~190 Ma.     

Experimental growth of åkermanite reaction rims between wollastonite and monticellite: evidence for volume diffusion control

Growth rates of monomineralic, polycrystalline åkermanite (Ca₂MgSi₂O₇) rims produced by solid-state reactions between monticellite (CaMgSiO₄) and wollastonite (CaSiO₃) single crystals were determined at 0.5 GPa dry argon pressure, 1,000–1,200°C and 5 min to 60 h, using an internally heated pressure vessel. Inert Pt-markers, initially placed at the monticellite–wollastonite interface, indicate symmetrical growth into both directions. This and mass balance considerations demonstrate that rim growth is controlled by transport of MgO. At 1,200°C and run durations between 5 min and 60 h, rim growth follows a parabolic rate law with rim widths ranging from 0.4 to 16.3 μm indicating diffusion-controlled rim growth. The effective bulk diffusion coefficient \( D_{\text{eff,MgO}}^{\text{Ak}} \) is calculated to 10^?15.8±0.1 m² s^?1. Between 1,000°C and 1,200°C, the effective bulk diffusion coefficient follows an Arrhenius law with E _a = 204 ± 18 kJ/mol and D ₀ = 10^?8.6±1.6 m² s^?1. Åkermanite grains display a palisade texture with elongation perpendicular to the reaction interface. At 1,200°C, average grain widths measured normal to elongation, increase with the square root of time and range from 0.4 to 5.4 μm leading to a successive decrease in the grain boundary area fraction, which, however, does not affect \( D_{\text{eff,MgO}}^{\text{Ak}} \) to a detectible extent. This implies that grain boundary diffusion only accounts for a minor fraction of the overall chemical mass transfer, and rim growth is essentially controlled by volume diffusion. This is corroborated by the agreement between our estimates of the effective MgO bulk diffusion coefficient and experimentally determined volume diffusion data for Mg and O in åkermanite from the literature. There is sharp contrast to the MgO–SiO₂ binary system, where grain boundary diffusion controls rim growth.     

Provenance of the Bosnian Flysch

Sandwiched between the Adriatic Carbonate Platform and the Dinaride Ophiolite Zone, the Bosnian Flysch forms a c. 3000 m thick, intensely folded stack of Upper Jurassic to Cretaceous mixed carbonate and siliciclastic sediments in the Dinarides. New petrographic, heavy mineral, zircon U/Pb and fission-track data as well as biostratigraphic evidence allow us to reconstruct the palaeogeology of the source areas of the Bosnian Flysch basin in late Mesozoic times. Middle Jurassic intraoceanic subduction of the Neotethys was shortly followed by exhumation of the overriding oceanic plate. Trench sedimentation was controlled by a dual sediment supply from the sub-ophiolitic high-grade metamorphic soles and from the distal continental margin of the Adriatic plate. Following obduction onto Adria, from the Jurassic–Cretaceous transition onwards a vast clastic wedge (Vranduk Formation) was developed in front of the leading edge, fed by continental basement units of Adria that experienced Early Cretaceous synsedimentary cooling, by the overlying ophiolitic thrust sheets and by redeposited elements of coeval Urgonian facies reefs grown on the thrust wedge complex. Following mid-Cretaceous deformation and thermal overprint of the Vranduk Formation, the depozone migrated further towards SW and received increasing amounts of redeposited carbonate detritus released from the Adriatic Carbonate Platform margin (Ugar Formation). Subordinate siliciclastic source components indicate changing source rocks on the upper plate, with ophiolites becoming subordinate. The zone of the continental basement previously affected by the Late Jurassic–Early Cretaceous thermal imprint has been removed; instead, the basement mostly supplied detritus with a wide range of pre-Jurassic cooling ages. However, a c. 80 Ma, largely synsedimentary cooling event is also recorded by the Ugar Formation, that contrasts the predominantly Early Cretaceous cooling of the Adriatic basement and suggests, at least locally, a fast exhumation.     

Mixing and chemical interdiffusion of trachytic and latitic magma in a subvolcanic complex of the Tertiary Westerwald (Germany)

A special kind of magma mixing is extraordinarily well exposed in the Bittersberg subvolcanic complex in the Tertiary volcanic field of the German Westerwald: A trachytic melt has been penetrated by a latitic dyke which has been dispersed within the host magma as small spherical enclaves (globules). Whole rock analyses of the globules show a change in composition that cannot be explained by a simple mechanical mixing between the endmembers. The most evolved globules have a phonolitic composition. Microprobe measurements in the microlithic matrix of the host rock and the guest indicate a diffusive motion of the alkalis from the host into the globules. On the other hand, an opposite trend can be observed for Ca, Mg, Fe and Ti, which are impoverished in the globules. The trace elements and the middle rare earth elements (MREE) has also been involved in the diffusive exchange. The REE-pattern of the most evolved (phonolitic) globules shows a characteristic trough in the area of the MREE which is almost identical to the REE-pattern of many phonolites. The phonolites and the alkali-rich trachytes of the Westerwald show similar globular textures as the Bittersberg volcanics. Therefore, generation of these rocks involving diffusive element exchange during mixing processes in a magma reservoir situated on a deeper crustal level may be possible.     

Cold seep deposits of Beauvoisin (Oxfordian; southeastern France) and Marmorito (Miocene; northern Italy): microbially induced authigenic carbonates

The relation of two well-known ancient carbonate deposits to hydrocarbon seepage was confirmed by this study. Archaea are found to be associated with the formation of Oxfordian seep carbonates from Beauvoisin and with a Miocene limestone from Marmorito ("tube-worm limestone"). Carbonates formed due to a mediation by archaea exhibit extremely positive or extremely negative δ¹³C_carbonate values, respectively. Highly positive values (+15‰) reflect the use of ¹³C-enriched CO₂ produced by methanogenesis. Low δ¹³C values of the Marmorito carbonates (–30‰) indicate the oxidation of seepage-derived hydrocarbons. Likewise, the δ¹³C content of specific tail-to-tail linked isoprenoids, biomarkers for archaea, was found to be strikingly depleted in these samples (as low as –115‰). The isotopic signatures corroborate that archaea were involved in the cycling of seepage-derived organic carbon at the ancient localities. Another Miocene limestone ("Marmorito limestone") shows a strong imprint of methanotrophic bacteria as indicated by δ¹³C values of carbonate as low as –40‰ and biomarker evidence. Epifluorescence microscopy and field-emission scanning electron microscopy revealed that bacterial biofilms were involved in carbonate aggregation. In addition to lucinid bivalves previously reported from both localities, we infer that sponges from Beauvoisin and tube worms from Marmorito depended on chemosynthesis as well. Low δ¹³C values of nodules related to sponge taphonomy (–27‰) indicate that sponges might have been linked to an enhanced hydrocarbon oxidation. Tube worm fossils from Marmorito closely resemble chemosynthetic pogonophoran tube worms from Recent cold seeps and are embedded in isotopically light carbonate (δ¹³C –30‰). Received: 13 October 1998 / Accepted: 5 February 1999     

A high precision U–Pb age of metamorphic rutile in coesite-bearing eclogite from the Dabie Mountains in central China: a new constraint on the cooling history

This paper first reports a high precision U–Pb age of 218±1.2 Ma for rutile in coesite-bearing eclogite from Jinheqiao in the Dabie Mounteins, east–central China. This work shows that the U–Pb mineral (rutile+omphacite) isochron age of 218±2.5 Ma and conventional rutile U–Pb concordia age of 218±1.2 Ma obtained by common Pb correction based on the Pb isotopic composition of omphacite in the same eclogite sample are consistent, proving that the omphacite with low U/Pb ratio (μ=2.8) can be used for common Pb correction in U–Pb dating of rutile. Oxygen isotope analysis of rutile aliquots gave the consistent δ¹⁸O values of −6.1±0.1%, demonstrating oxygen isotope homogenization in the rutile of different grains as inclusion in garnet and grain in matrix. Oxygen isotope thermometry yields temperatures of 695±35 and 460±15 °C for quartz–garnet and quartz–rutile pairs, respectively. These oxygen isotopic observations suggest that the diffusion of oxygen in rutile as inclusion in garnet is not controlled by garnet. According to field-based thermochronological studies of rutile, an estimate of the T_c of about 460 °C for U–Pb system in rutile under rapid cooling conditions (20 °C/Ma) was advised. Based on this U–Pb age as well as the reported chronological data with their corresponding metamorphic and/or closure temperature, an improved T–t path has been constructed. The T–t path confirms that the UHPM rocks in South Dabie experienced a rapid cooling following the peak metamorphism before 220 Ma and a long isothermal stage from 213 to 180 Ma around 425 °C.     

Efficient block preconditioners for the coupled equations of pressure and deformation in highly discontinuous media

Large‐scale simulations of flow in deformable porous media require efficient iterative methods for solving the involved systems of linear algebraic equations. Construction of efficient iterative methods is particularly challenging in problems with large jumps in material properties, which is often the case in geological applications, such as basin evolution at regional scales. The success of iterative methods for this type of problems depends strongly on finding effective preconditioners. This paper investigates how the block‐structured matrix system arising from single‐phase flow in elastic porous media should be preconditioned, in particular for highly discontinuous permeability and significant jumps in elastic properties. The most promising preconditioner combines algebraic multigrid with a Schur complement‐based exact block decomposition. The paper compares numerous block preconditioners with the aim of providing guidelines on how to formulate efficient preconditioners. Copyright © 2010 John Wiley & Sons, Ltd.