Seismic behavior of an inverted T-shape flexible retaining wall via dynamic centrifuge tests

In the design procedure for a retaining wall, the pseudo-static method has been widely used and dynamic earth pressure is calculated by the Mononobe–Okabe method, which is an extension of Coulomb’s earth pressure theory computed by force equilibrium. However, there is no clear empirical basis for treating the seismic force as a static force, and recent experimental research has shown that the Mononobe–Okabe method is quite conservative, and there exists a discrepancy between the assumed conditions and real seismic behavior during an earthquake. Two dynamic centrifuge tests were designed and conducted to reexamine the Mononobe–Okabe method and to evaluate the seismic lateral earth pressure on an inverted T-shape flexible retaining wall with a dry medium sand backfill. Results from two sets of dynamic centrifuge experiments show that inertial force has a significant impact on the seismic behavior on the flexible retaining wall. The dynamic earth pressure at the time of maximum moment during the earthquake was not synchronized and almost zero. The relationship between the back-calculated dynamic earth pressure coefficient at the time of maximum dynamic wall moment and the peak ground acceleration obtained from the wall base peak ground acceleration indicates that the seismic earth pressure on flexible cantilever retaining walls can be neglected at accelerations below 0.4 g. These results suggest that a wall designed with a static factor of safety should be able to resist seismic loads up to 0.3–0.4 g.     

Geochemical and Sr–Nd isotopic constraints on the petrogenesis of the Goesan monzodiorite pluton in the central Okcheon belt,Korea

The Permian–Triassic high pressure metamorphism and potassic magmatism in central Korea attest to the extension of the Dabie‐Sulu collision belt in central‐eastern China towards the Korean Peninsula and possibly the Japanese Islands. We present major and trace element and Sr–Nd isotope data for a ca. 230 Ma monzodiorite pluton emplaced in the Goesan area, central Okcheon belt, Korea. This pluton shows geochemical features comparable with those of the coeval monzonite–syenite–gabbro–mangerite suite documented recently in the Gyeonggi massif. The metaluminous and alkali–calcic signatures of the Goesan intrusives correspond to the Caledonian‐type post‐orogenic granitoids. The K₂O/Na₂O ratios of all analyzed samples are greater than 1, and are not correlative with their SiO₂ contents. The enrichment of both large‐ion‐lithophile elements and highly compatible elements in the Goesan pluton is probably indicative of metasomatized mantle origin. The elemental fractionation in the source region must have occurred in the distant past, possibly the Paleoproterozoic, to generate significantly negative ε_Nd(t) values (< –16). Chondrite‐normalized rare earth element patterns as well as Rb/Sr and Ba/Rb ranges suggest that the source consists of amphibole‐bearing rocks. Progressive decreases in negative Eu anomaly and Ba, Sr, Ni, Cr and V contents with increasing SiO₂ contents reflect an important role of plagioclase, biotite and hornblende for the fractionation process. Zr is undersaturated in the potassic, metaluminous melt. The initial Sr–Nd isotopic compositions of the samples are correlated with their SiO₂ contents, substantiating a role of crustal assimilation during the magmatic differentiation. The Sr–Nd elemental and isotopic modeling suggests that the Goesan pluton was initially slightly heterogeneous in its isotopic composition, and underwent concurrent assimilation and fractional crystallization. The occurrence of the Goesan pluton provides further evidence corroborating the amalgamation of allochthonous terranes within the Okcheon belt during the Permian–Triassic collisional orogeny.     

Environmental characterization of periphyton community

The present paper deals with the behavior of the Attached Microbial Community （AMC） for water self-purification at different riverbeds in a typical local river. The study quantitatively investigated the problem starting with in-situ sampling. It was found that more biomass of AMC was at riffles with wider distribution than in pools. High current velocity （HCV） plays a negative role at the initial stage of attachment on the riverbed, but HCV aids the community proliferation after stable attachment. External disturbances such as rainfalls and discharges from dams or reservoirs would detach the periphyton depending on the intensity of turbulence in water. However, it was discovered that the flock of periphyton could be restored very quickly because it was not completely removed. Thus, in order to enhance self-purification by periphyton, a suitable configuration of the riverbed must be constructed, and occasional appropriate repair along the channels would improve the decontamination of the river.     

Decoupling of Macromolecular Compositions of Particulate Organic Matters between the Water Columns and the Sediment in Geoje-Hansan Bay,South Korea

The biochemical composition of particulate organic matter (POM) is very important to understand in relation to the trophic conditions of marine ecosystems since it forms the primary trophic base. The present study investigated the biochemical compositions (i.e., carbohydrates, proteins, and lipids) of POM monthly from January to December 2015 in Geoje-Hansan Bay to determine if the macromolecular composition of POM is coupled between the water columns and sediment. A spatial difference in the macromolecular compositions was observed in the water columns between the inner and outer bays, which may be caused by the different physiological conditions of phytoplankton growth that are due to the water circulation pattern in the bay. In contrast, no distinctive spatial difference in the macromolecular compositions was found in the sedimentary organic matter. Overall, while carbohydrates were the dominant (45.7%) macromolecules of the POM in the water columns, proteins were dominant (47.9%) in the sedimentary organic matter during our observation period. Decoupling of the macromolecular compositions between the water columns and underneath the sediment in Geoje-Hansan Bay appears to be a result of the various effects of selective filter feeding by oysters and protein-dominant benthic microalgae and fouling organisms.     

A Chart for Judging Optimal Sample Spacing for Ore Grade Estimation: Part II

Natural Resources Research - Resources of mineral deposits are commonly estimated using data extracted from rock cores obtained by drilling. Information of good quality and quantity is essential to...     

Robust Rule-Based Aggradational Lobe Reservoir Models

Stratigraphic rule-based reservoir models approximate sedimentary dynamics to generate numerical models of reservoir architecture with realistic spatial distributions of petrophysical properties for reservoir forecasting and to support development decision making. A few intuitive rules for the sequential placement of surfaces bounding reservoir units render realistic reservoir heterogeneity, continuity, and spatial organization of petrophysical property distributions that are difficult to obtain using conventional geostatistical pixel- and object-based subsurface methods. While these methods are emerging in applications specifically for deepwater and fluvial clastic reservoirs, there are some remaining obstacles to broad application, such as selection of rule parameters and addressing emergent non-stationarities over the sequence of the placed surfaces. Firstly, there is a need to tune rule parameters to ensure the models honor natural heterogeneities. We demonstrate this for the compensational rule. Secondly, invariants over model sequence (from the base to the top of the model) may occur with respect to shape, volume, undulation, and gradients of surfaces. For example, for a stack of compensational lobes, the volume of individual lobes may decrease due to the onlapping of previous bathymetry and also increasing undulation over model sequence may occur. In addition, for stacking of compensational lobes, the interfacial width and average gradient of the composite surface may initially increase, but then saturate and stabilize. Such non-stationarities represent numerical artifacts that may bias the results from these rule-based models. It is essential that these features are quantified and mitigated as a prerequisite for robust application of rule-based aggradational lobe methods for reservoir modeling.

     

Sulfur Isotope Variations of Metallic Ore Deposits in the Gyeongsang Basin,South Korea

Many metallic ore deposits of the Late Cretaceous to Early Tertiary periods are distributed in the Gyeongsang Basin. Previous and newly analyzed sulfur isotope data of 309 sulfide samples from 56 ore deposits were reviewed to discuss the genetic characteristics in relation to granitoid rocks. The metallogenic provinces of the Gyeongsang Basin are divided into the Au–Ag(–Cu–Pb–Zn) province in the western basin where the sedimentary rocks of the Shindong and Hayang groups are distributed, Pb–Zn(–Au–Ag–Cu), Cu–Pb–Zn(–Au–Ag), and Fe–W(–Mo) province in the central basin where the volcanic rocks of the Yucheon Group are dominant, and Cu(–Mo–W–Fe) province in the southeastern basin where both sedimentary rocks of the Hayang Group and Tertiary volcanic rocks are present. Average sulfur isotope compositions of the ore deposits show high tendencies ranging from 2.2 to 11.7‰ (average 5.4‰) in the Pb–Zn(–Au–Ag–Cu) province, ?0.7 to 11.5‰ (average 4.6‰) in the Cu–Pb–Zn(–Au–Ag) province, and 3.7 to 11.4‰ (average 7.5‰) in the Fe–W(–Mo) province in relation to magnetite‐series granitoids, whereas they are low in the Au–Ag(–Cu–Pb–Zn) province in relation to ilmenite‐series granitoids, ranging from ?2.9 to 5.7‰ (average 1.7‰). In the Cu(–Mo–W–Fe) province δ³⁴S values are intermediate ranging from 0.3 to 7.7‰ (average 3.6‰) and locally high δ³⁴S values are likely attributable to sulfur derived from the Tertiary volcanic rocks during hydrothermal alteration through faults commonly developed in this region. Magma originated by the partial melting of the ³⁴S‐enriched oceanic plate intruded into the volcanic rocks and formed magnetite‐series granitoids in the central basin, which contributed to high δ³⁴S values of the metallic deposits. Conversely, ilmenite‐series granitoids were formed by assimilation of sedimentary rocks rich in organic sulfur that influenced the low δ³⁴S values of the deposits in the western and southeastern provinces.     

Long-term TNT and DNT contamination: 1-D modeling of natural attenuation in the vadose zone: case study,Portugal

The vadose zone of a trinitrotoluene (TNT) and dinitrotoluene (DNT) contaminated site was investigated to assess the mobility of those explosives under natural conditions. Located in the left margin of the River Tejo Basin, Portugal, the site is located on unconsolidated sediments. Wastewaters associated with the 50-year explosives production were disposed in excavated ponds, from where water would infiltrate and pollute the unsaturated and saturated parts of the local aquifers. Two boreholes were drilled to 9 m depth in such a former waste pond to investigate the contaminant’s fate in the vadose zone. Sediment samples were taken every 1–2 m for analysis of the poly-nitroaromatics (p-NACs) and organic volatile compounds, pH, organic carbon content, cation exchange capacity and grain size analysis. The main contaminant was TNT representing >70 % of the total p-NACs concentration that peaked approximately 7 mg/kg in one borehole, even if the median in both boreholes was of ~1 mg/kg. DNT was 4–30 % of the total p-NACs and nitrotoluene (NT), up to 5 %. No other (volatile) organic compound was detected. The predominance of TNT as the main contaminant implies that any natural mass reduction has been inefficient to clean the site. Several 1-D model simulations of p-NACs cleaning of the vadose zone under natural conditions indicated that the most probable scenario of combined advection and partitioning will only remove TNT after 10’s of years, whereas DNT and NT will hardly be removed. Such low concentrations and long times for the p-NACs removal, suggest that by now those compounds have been washed-out to a level below standard limits.     

Cloud condensation nuclei (CCN) concentration in the Brazilian northeast semi-arid region: the influence of local circulation

Ground-based aerosol instrumentation covering particle size diameters from 25 nm to 32 µm was deployed to determine aerosol concentration and cloud condensation nuclei (CCN)-activation properties at water vapor supersaturations in the range of S = 0.20–1.50 % in the remote Brazilian northeast semi-arid region (NEB) in coastal (maritime) and continental (inland) regimes. The instruments measured aerosol number concentration and activation spectra for CCN and revealed that aerosol properties are sensitive with respect to the sources as a function of the local wind circulation system. The observations show that coastal aerosol total number concentrations are above 3,000 cm^?3 on average, exhibiting concentration peaks depending on the time of the day in a consistent daily pattern. The variation on aerosol concentration has also influences on the fraction of particles active as CCN. At 1.0 % water vapor supersaturation, the fraction can reach as high as 80 %. Inland aerosol total concentrations were about 1,800–1,900 cm^?3 and did not show much diurnal variation. The fraction of particles active as CCN observed inland depend on the history of the air masses, and was much higher when air masses were originated over the sea. It was found that (NH₄)₂SO₄ and NaCl are the major soluble inorganic fraction of the aerosols at the coast. The major fraction of NaCl was present in the coarse mode, while ammonium sulfate dominates the inorganic fraction at the submicron range, with about 10 % of the total aerosol mass at 0.32 µm. Inorganic compounds are almost absent in particles with sizes around 0.1 μm. The study suggests that the air masses with high concentration of CCN originate at the sea. The feasible explanation lies in the fact that the NEB’s beaches have a particular morphology that produces a wide surf zone and creates a large load of aerosols when combined with strong and permanent winds of the region.