Effects of experimental warming on soil microbial communities in two contrasting subalpine forest ecosystems,eastern Tibetan Plateau,China

Soil microbial communities are primarily regulated by environmental temperature. Our study investigated the effects of global warming on soil microbial community composition as measured via phospholipid fatty acid (PLFA) analysis and soil chemical characteristics in relation to soil depth in a dragon spruce plantation and a spruce-fir-dominated natural forestin the Eastern Tibetan Plateau. Open-top chambers were utilized to increase the soil and air temperature. Soil samples were collected from the 0-10 cm, 10-20 cm, and 20-30 cm layers after a 4-year warming. Our results showed that the soil microbial community and the contents of TC (Total carbon), TN (Total nitrogen), NO ₃ ^- , and NH ₄ ⁺ responded differently to warming in the two contrasting forests, especially at the 0-10 cm soil depth. Warming increased soil microbial biomass at the 0-20 cm depth of soil in natural forest but reduced it at the 0-10 cm depth ofsoil in the plantation. In contrast, the TC and TN contents were reduced in most soil layers of a natural forest but increased in all of the soil layers of the plantation under warming conditions. This result suggested that the effects of warming on soil microbial community and soil C and N pools would differ according to soil depth and forest types; thus, the two contrasting forests would under go differing changes following the future climate warming in this region.     

Dynamic process simulation with a Savage-Hutter type model for the intrusion of landslide into river

Natural damming of rivers by mass movements is a very common and potentially dangerous phenomena which has been documented all over the world. In this paper, a two-layer model of Savage-Hutter type is presented to simulate the dynamic procedure for the intrusion of landslide into rivers. The two-layer shallow water system is derived by depth averaging the incompressible Navier-Stokes equations with the hydrostatic assumption. A high order accuracy scheme based on the finite volume method is proposed to solve the presented model equations. Several numerical tests are performed to verify the realiability and feasibility of the proposed model. The numerical results indicate that the proposed method can be competent for simulating the dynamic process of landslide intrusion into the river. The interaction effect between both layers has a significant impact on the landslide movement, water fluctuation and wave propagation.     

A public Cloud-based China’s Landslide Inventory Database (CsLID): development,zone, and spatiotemporal analysis for significant historical events, 1949-2011

Landslide inventory plays an important role in recording landslide events and showing their temporal-spatial distribution. This paper describes the development, visualization, and analysis of a China's Landslide Inventory Database (CsLID) by utilizing Google’s public cloud computing platform. Firstly, CsLID (Landslide Inventory Database) compiles a total of 1221 historical landslide events spanning the years 1949-2011 from relevant data sources. Secondly, the CsLID is further broken down into six zones for characterizing landslide cause-effect, spatiotemporal distribution, fatalities, and socioeconomic impacts based on the geological environment and terrain. The results show that among all the six zones, zone V, located in Qinba and Southwest Mountainous Area is the most active landslide hotspot with the highest landslide hazard in China. Additionally, the Google public cloud computing platform enables the CsLID to be easily accessible, visually interactive, and with the capability of allowing new data input to dynamically augment the database. This work developed a cyber-landslide inventory and used it to analyze the landslide temporal-spatial distribution in China.     

Three-dimensional stability of landslides based on local safety factor

Unlike the limit equilibrium method (LEM), with which only the global safety factor of the landslide can be calculated, a local safety factor (LSF) method is proposed to evaluate the stability of different sections of a landslide in this paper. Based on three-dimensional (3D) numerical simulation results, the local safety factor is defined as the ratio of the shear strength of the soil at an element on the slip zone to the shear stress parallel to the sliding direction at that element. The global safety factor of the landslide is defined as the weighted average of all local safety factors based on the area of the slip surface. Some example analyses show that the results computed by the LSF method agree well with those calculated by the General Limit Equilibrium (GLE) method in two-dimensional (2D) models and the distribution of the LSF in the 3D slip zone is consistent with that indicated by the observed deformation pattern of an actual landslide in China.     

Altitudinal trends in δ<Superscript>13</Superscript>C value,stomatal density and nitrogen content of <Emphasis Type="Italic">Pinus tabuliformis</Emphasis> needles on the southern slope of the middle Qinling Mountains,China

In this study, a coniferous tree species (Pinus tabuliformis Carr.) was investigated at a moderate-altitude mountainous terrain on the southern slope of the middle Qinling Mountains (QLM) to detect the trends in carbon isotope ratio (δ¹³C), leaf nitrogen content (LNC) and stomatal density (SD) with altitude variation in north-subtropical humid mountain climate zone of China. The results showed that LNC and SD both significantly increased linearly along the altitudinal gradient ranging from 1000 to 2200 m, whereas leaf δ¹³C exhibited a significantly negative correlation with the altitude. Such a correlation pattern differs obviously from that obtained in offshore low-altitude humid environment or inland high-altitude semi-arid environment, suggesting that the pattern of increasing δ¹³C with the altitude cannot be generalized. The negative correlation between δ¹³C and altitude might be attributed mainly to the strengthening of carbon isotope fractionation in plants caused by increasing precipitation with altitude. Furthermore, there was a remarkable negative correlation between leaf δ¹³C and LNC. One possible reason was that increasing precipitation that operates to increase isotopic discrimination with altitude overtook the LNC in determining the sign of leaf δ¹³C. The significant negative correlation between leaf δ¹³C and SD over altitudes was also found in the present study, indicating that increases in SD with altitude would reduce, rather than enhance plant δ¹³C values.     

Non-capacity transport of non-uniform bed load sediment in alluvial rivers

Rivers often witness non-uniform bed load sediment transport. For a long time, non-uniform bed load transport has been assumed to be at capacity regime determined exclusively by local flow. Yet whether the capacity assumption for non-uniform bed load transport is justified remains poorly understood. Here, the relative time scale of non-uniform bed load transport is evaluated and non-capacity and capacity models are compared for both aggradation and degradation cases with observed data. As characterized by its relative time scale, the adaptation of non-uniform bed load to capacity regime should be fulfilled quickly. However, changes in the flow and sediment inputs from upstream or tributaries hinder the adaptation. Also, the adaptation to capacity regime is size dependent, the finer the sediment size the slower the adaptation is, and vice versa. It is shown that the capacity model may entail considerable errors compared to the non-capacity model. For modelling of non-uniform bed load, noncapacity modelling is recommended, in which the temporal and spatial scales required for adaptation are explicitly appreciated.     

Size distributions and source function of sea spray aerosol over the South China Sea

The number concentrations in the radius range of 0.06 – 5 μm of aerosol particles and meteorological parameters were measured on board during a cruise in the South China Sea from August 25 to October 12, 2012. Effective fluxes in the reference height of 10 m were estimated by steady state dry deposition method based on the observed data, and the influences of different air masses on flux were discussed in this paper. The number size distribution was characterized by a bimodal mode, with the average total number concentration of(1.50 ± 0.76)×10~3 cm~(-3). The two mode radii were 0.099 μm and 0.886 μm, both of which were within the scope of accumulation mode. A typical daily average size distribution was compared with that measured in the Bay of Bengal. In the whole radius range, the number concentrations were in agreement with each other; the modes were more distinct in this study than that abtained in the Bay of Bengal. The size distribution of the fluxes was fitted with the sum of log-normal and power-law distribution. The impact of different air masses was mainly on flux magnitude, rather than the shape of spectral distribution. A semiempirical source function that is applicable in the radius range of 0.06 μmr_(80)0.3 μm with the wind speed varying from 1.00 m s~(-1) to 10.00 m s~(-1) was derived.     

Effect of stocking density on water quality and (Growth,Body Composition and Plasma Cortisol Content) performance of pen-reared rainbow trout (<Emphasis Type="Italic">Oncorhynchus mykiss</Emphasis>)

The goal of the study was to examine the effect of stocking density on the water quality of culture area, as well as the growth, body composition and cortisol content of rainbow trout（Oncorhynchus mykiss）. Pen-reared trout were stocked in densities of 40, 60, 80 fish individuals m^-3(4.6, 6.6, 8.6 kg m^-3, SD1, SD2 and SD3 groups, respectively) for 300 days. Compared to the water from SD1 and SD2, that from SD3 exhibited significantly higher NH₄⁺-N content and COD（chemical-oxygen-demand）, and a significant reduction of dissolved oxygen in day 180(40.6 kg m^-3). Stocking density was significantly associated with body weight, standard length, VSI（viscerosomatic index）, CF（condition factor） and FC（food coefficient） in group SD3, particularly in day 240 and day 300(45 or 49.3 kg m^-3). Increased crude fat and decreased crude protein were displayed in high density group when the density reached to 36 kg m^-3. As a cumulative effect of density-related stress, VSI, CF, FC, moisture, and crude protein content varied over time in each density group（SD1, SD2, and SD3）. In summary, trout exhibited a better growth performance in low density(26.3 kg m^-3) than those reared in high densities(36 and 45 kg m^-3). The results indicate that rainbow trout（114.44 g ± 6.21 g, 19.69 cm ± 0.31 cm） initially stocked in 6.6 or 8.6 kg m^-3 should be lightened to less than 36 kg m^-3 after an intensive rearing for 240 days.     

Application of 2D numerical model to unsteady performance evaluation of vertical-axis tidal current turbine

Tidal current energy is renewable and sustainable, which is a promising alternative energy resource for the future electricity supply. The straight-bladed vertical-axis turbine is regarded as a useful tool to capture the tidal current energy especially under low-speed conditions. A 2D unsteady numerical model based on Ansys-Fluent 12.0 is established to conduct the numerical simulation, which is validated by the corresponding experimental data. For the unsteady calculations, the SST model, 2×10~5 and 0.01 s are selected as the proper turbulence model, mesh number, and time step, respectively. Detailed contours of the velocity distributions around the rotor blade foils have been provided for a flow field analysis. The tip speed ratio(TSR) determines the azimuth angle of the appearance of the torque peak, which occurs once for a blade in a single revolution. It is also found that simply increasing the incident flow velocity could not improve the turbine performance accordingly. The peaks of the averaged power and torque coefficients appear at TSRs of 2.1 and 1.8, respectively. Furthermore, several shapes of the duct augmentation are proposed to improve the turbine performance by contracting the flow path gradually from the open mouth of the duct to the rotor. The duct augmentation can significantly enhance the power and torque output. Furthermore, the elliptic shape enables the best performance of the turbine. The numerical results prove the capability of the present 2D model for the unsteady hydrodynamics and an operating performance analysis of the vertical tidal stream turbine.