钱塘江江心排污的数值模拟

从立面二维非恒定流体动力学方程出发,应用κ-ε湍流模式计算流场,再用准三维的浓度对流-扩散方程,即考虑了侧向扩散的立面二维浓度控制方程,模拟了钱塘江江心6个竖管排污在潮流作用下近区浓度场,其结果和实际观测值基本吻合。     

气候变化对京津唐地区水资源及供需平衡的影响

根据大气环流模型(GCMs)输出的未来气候变化情景,结合历史资料的诊断分析,应用建立的流域水文模型及水资源利用综合评价模型,研究了气候变化对京津唐地区水资源数量和时空变化的影响。在地区未来经济发展及部门用水量预测的基础上,分析了气候变化对供水、需水和部门缺水的影响以及经济损失。     

THE IMPACT OF NOAA SATELLITE SOUNDING DATA ON THE SYSTEMATIC FORECAST ERROR OF B-MODEL

This paper is to examine the impact of satellite data on the systematic error of operational B-model in China.Em-phasis is put on the study of the impact of satellite sounding data on forecasts of the sea level pressure field and 500 hPaheight.The major findings are as follows.(1)The B-model usually underforecasts the strength of features in the sea level pressure(SLP)field,i.e.pressuresare too low near high pressure systems and too high near low pressure systems.(2)The nature of the systematic errors found in the 500 hPa height forecasts is not as clear cut as that of the SLPforecasts,but most often the same type of pattern is seen,i.e.,the heights in troughs are not low enough and those inridges are not high enough.(3)The use of satellite data in the B-model analysis/forecast system is found to have an impact upon the model'sforecast of SLP and 500 hPa height.Systematic errors in the vicinity of surface lows/500 hPa troughs over the oceansare usually found to be significantly reduced.A less conclusive mix of positive and negative impacts was found for allother types of features.     

门源、共和地震前甘青交界地区浅层地温异常时空分布特征

本文研究了１９８６年门源６．４级地震和１９９０年共和７．０级地震地，１９８０－１９９０年青海省东北部甘青交界地区浅层地温场的时空分布特征。主要结论如下：门源地震前，１９８９年出现以青海湖为中心的浅层地温增温区，其中从湟源－门源－带形成椭圆形地温高值区，１９８６年访温区地温下降；共和地震和前从１９８７年出现大面积、长时间浅层地温增高区。增温幅度较大的地区集中在青海省湟源－共和－兴海－线。距震中区较远     

Optical and chemical analysis of iron in Luna 20 plagioclase

The iron content of Luna 20 anorthitic plagioclase ranges from a few hundredths to a few tenths of a weight per cent from crystal to crystal. Rather than being related to the original composition of the parent magma or magmas, the optical and chemical properties of the iron appear to be caused by postcrystallization migration and exsolution.Oriented inclusions of iron alloy present as needle-like crystals are observed, and the host plagioclases are irregularly chemically zoned in iron. It is not known whether thermal metamorphism or another process of chemical reduction related to impact and shock is responsible for the observed phenomena. Postcrystallization effects may obscure evidence of the original oxidation state and iron concentration of these crystals.     

Geodynamic settings of Mesozoic large-scale mineralization in North China and adjacent areas

Based on the summary of the highly precise datings of the metal deposits and related granitic rocks in North China craton and adjacent areas, such as the molybdenite Re-Os datings,⁴⁰Ar-³⁹Ar datings of mica, K-feldspar and quartz, some Rb-Sr isochrons, and the SHRIMP zircon U-Pb dating and single grain zircon U-Pb dating, we suggest that the large-scale mineralization in North China craton and adjacent areas take place in three periods of 200-160Ma, 140Ma±, and 130-110Ma. Their corresponding geodynamic settings are proposed to be the collision orogenic process, transformation of the tectonic regime, and delamination of the lithosphere, respectively, in light of analyzing the Mesozoic geodynamic evolution in the North China craton.     

基于GIS的滑坡、泥石流灾害危险性区划关键问题研究

随着GIS技术的引入,滑坡、泥石流灾害危险性区划的效率和准确性得以大大提高。依据工程地质类比原则,在灾害学理论指导下,结合专家打分、层次分析、人工神经网络、信息量、Logistic回归、统计量等模型方法,以MAPGIS软件为平台,利用C++语言开发了滑坡、泥石流灾害危险性区划评价分析系统;并重点探讨了GIS支持下的滑坡、泥石流灾害危险性区划过程中的因子分析、模型选取、模型复合、单元划分、系统集成、结果评价等关键问题,建立了一整套基于GIS的滑坡、泥石流灾害评价方法体系。应用该系统对长江三峡库区和辽宁省鞍山市分别开展了滑坡、泥石流灾害危险性区划研究,取得了较好的效果。     

基于OpenGL的3维场景矢量打印输出研究与实现

3维场景的打印输出是3维GIS的基本功能之一。目前的3维GIS的可视化功能大多数是基于OpenGL实现的。OpenGL为了保持其与操作系统的无关性,没有直接提供场景的打印功能。因此,需要采用特殊的方法实现OpenGL的场景打印。通常,有三种方式实现该功能:位图打印、渲染打印和反馈打印。前两种输出的是当前屏幕渲染的栅格图像;后者输出的是投影在屏幕上的矢量图形。相对于位图打印和渲染打印,反馈打印(即矢量打印)的输出精度较高。目前的GIS平台实现矢量打印输出的较少。提出一种矢量打印输出的方法,并给出在VC 开发环境下的一些实现细节。     

地磁测量及其应用

地磁已广泛应用于地球科学、航天航空、交通通讯、地震预测、空间天气等诸多领域。鉴于地磁测量是地磁应用的基础，本文分析了现代地磁测量及其研究概况，展望了地磁应用发展趋势。     

Geology and Metallogenesis of the Sawayaerdun Gold Deposit in the Southwestern Tianshan Mountains, Xinjiang, China

The Sawayaerdun gold deposit, located in Wuqia County, Southwest Tianshan, China, occurs in Upper Silurian and Lower Devonian low‐grade metamorphic carbonaceous turbidites. The orebodies are controlled by a series of NE‐NNE‐trending, brittle–ductile shear zones. Twenty‐four gold mineralized zones have been recognized in the Sawayaerdun ore deposit. Among these, the up to 4‐km‐long and 200‐m wide No. IV mineralized zone is economically the most important. The average gold grade is 1–6 g/t. Gold reserves of the Sawayaerdun deposit have been identified at approximately 37 tonnes and an inferred resource of 123 tonnes. Hydrothermal alteration is characterized by silicification, pyritization, arsenopyritization, sericitization, carbonatization and chloritization. On the basis of field evidence and petrographic analysis, five stages of vein emplacement and hydrothermal mineralization can be distinguished: stage 1, early quartz stage, characterized by the occurrence of quartz veins; stage 2, arsenopyrite–pyrite–quartz stage, characterized by the formation of auriferous quartz veinlets and stockworks; stage 3, polymetallic sulfide quartz stage, characterized by the presence of auriferous polymetallic sulfide quartz veinlets and stockworks; stage 4, antimony–quartz stage, characterized by the formation of stibnite–jamesonite quartz veins; and stage 5, quartz–carbonate vein stage. Stages 2 and 3 represent the main gold mineralization, with stage 4 representing a major antimony mineralization episode in the Sawayaerdun deposit. Two types of fluid inclusion, namely H₂O–NaCl and H₂O–CO₂–NaCl types, have been recognized in quartz and calcite. Aqueous inclusions show a wide range of homogenization temperatures from 125 to 340°C, and can be correlated with the mineralization stage during which the inclusions formed. Similarly, salinities and densities of these fluids range for each stage of mineralization from 2.57 to 22 equivalent wt% NaCl and 0.76 to 1.05 g/cm³, respectively. The ore‐forming fluids thus are representative of a medium‐ to low‐temperature, low‐ to medium‐salinity H₂O–NaCl–CO₂–CH₄–N₂ system. The δ³⁴S_CDT values of sulfides associated with mineralization fall into a narrow range of ?3.0 to +2.6‰ with a mean of +0.1‰. The δ¹³C_PDB values of dolomite and siderite from the Sawayaerdun gold deposit range from ?5.4 to ?0.6‰, possibly reflecting derivation of the carbonate carbon from a mixed magmatic/sedimentary source. Changes in physico‐chemical conditions and composition of the hydrothermal fluids, water–rock exchange and immiscibility of hydrothermal fluids are inferred to have played important roles in the ore‐forming process of the Sawayaerdun gold–antimony deposit.