Modes of raising northeastern Tibet probed by explosion seismology

New wide-angle reflection and refraction seismic data provide constraints on the structure of the upper lithosphere, and test models of its evolution to raise the northeastern part of the Tibetan Plateau. Amplitudes observed for reflections from the crust-mantle boundary are sufficiently large to suggest that there is no significant partial melt in the deep crust. The data show an increase of the crustal thickness between terranes from north of the Kun Lun Fault into the Qang Tang of central Tibet, and a contrast among their intracrustal images and compositions. In the north, P and S velocities are consistent with a dominantly felsic composition and show that only the upper crust thickened. South of the Kun Lun Fault a thicker crust made of two layers could result from the superposition of the originally thin crust of the Bayan Har terrane on the lower part of the crust of the domain to the north, which upper crust it shoved and thickened. Different modes of crustal thickening, either by thickening of individual layers or superpositions and imbrication among them appear to work jointly to raise the topography.     

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.     

Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.     

长江中下游晚中生代中基性岩的铅同位素特征:富集地幔的证据

长江中下游东段庐枞、怀宁、繁昌、铜陵和宁芜地区的中基性岩属于碱性系列 ,具有高的U ,Th含量和Th/Pb ,U/Pb比值 ,分别平均为 2 .82× 10 -6,9.5 6× 10 -6和 0 .6 35 ,0 .184。样品的初始铅同位素 (130Ma)组成为 :(2 0 6Pb/ 2 0 4Pb) i=17.6 5～ 18.6 0 ,(2 0 7Pb/ 2 0 4Pb) i=15 .4 2～ 15 .5 0 ,(2 0 8Pb/ 2 0 4Pb) i=37.6 7～ 38.0 4。形成中基性岩的原始岩浆来源于富集的岩石圈地幔 ,具有EMⅠ和EMⅡ ,且以EMⅡ为主的特征。和长江中下游西段黄石地区以及大别地块西南部玄武岩的比较表明 ,长江中下游地区岩石圈地幔高的Th/Pb和U/Pb比值可能和俯冲板片析出流体的交代有关。晚中生代时期 ,华北板块岩石圈地幔以EMⅠ特征为主 ,华南板块岩石圈地幔以EMⅡ特征为主 ,岩石圈地幔性质的区域性分布与印支期扬子板块深俯冲事件密切相关。虽然中国东部新生代玄武岩因岩石圈大规模减薄表现了亏损特征 ,但残留的富集岩石圈地幔在中国东部新生代玄武岩的Pb同位素中仍有所反映     

蒙甘新相邻(北山)地区金铜矿床时空分布特征及成矿作用

文章首次对蒙甘新相邻(北山)地区各类金、铜和铜—镍矿床(点)地质特征、成因类型和空间分布特点进行了系统总结，论证了金、铜和铜—镍成矿作用与古生代岩浆活动的关系，对区域地壳演化过程中金、铜和铜—镍成矿的动力学机制进行了深入讨论。研究结果表明，该区的金矿床(点)大体可划分为变质岩型、火山岩型、斑岩型和深成侵入岩型；铜矿床(点)有斑岩型、夕卡岩型和铜—镍硫化物型。金和铜矿床(点)大都沿古板块汇聚带分布，与海西期火成岩具密切的时空分布关系，它们是古板块对接碰撞期和碰撞期后大规模构造—岩浆活动的产物。     

土屋-延东斑岩型铜(钼)矿床多源信息找矿模型

为提高东天山铜镍成矿带内的矿产勘查效益，文章综合了区域成矿环境、矿床特征、地球物理场、地球化学场等成矿信息，尝试建立了土屋—延东斑岩型铜钼矿床的多源信息找矿模型。认为成矿带内铜矿资源远景良好，必将成为我国又一个铜矿资源潜力区。     

玛尼7.9级地震对昆仑山口西8.1级地震的触发作用及动力背景初探

根据库仑静应力变化的概念，对青藏块体中部地区1997年11月8日玛尼7．9级地震及2001年11月14日昆仑山口西8．1级地震的应力触发作用进行了初步研究。不同震源机制解计算结果表明，玛尼地震造成了昆仑地震断层面上10^-3MPa量级的库仑应力增量，该变化仅使得昆仑地震的发生提前了最长10年左右，表明当前地壳应变能水平可能并不很低。对照20世纪初以来全球7级以上强震频度和强度演化特征与地球自转变化的关系，认为地球自转幅度衰减、变化频率升高是近期强震活动的重要控制因素。昆仑山口西8．1级地震的发生，可能是地球自转持续加速阶段后期，青藏块体内部区域应力场逐渐强化，及玛尼地震应力触发的结果。     

Study of Triggering Action Between the Mani （Ms7.9） and the West Kunlun Mountains Pass （ Ms 8.1 ） Great Earthquakes and Their Dynamic Background

Based on Coulomb static stress variation, the stress trigging action of the Mani ( Ms7.9, Nov.1997) earthquake on the West Kuulun Mountains Pass (MsS.1, Nov. 2001 ) earthquake is researched. Results of different source mechanism resolutions show that a 10_3 MPa Coulomb stress due to the Mani earthquake was added to the fracture fault of the Kunlun earthquake, and this may shift the broken date to about 10 years earlier, and infer that the stress level in the crust is not low. Comparing the relationship between strong earthquake strength and frequency and earth rotation change, it is shown that the strength‘s decrease and the variation period‘ s shortening of earth rotation are important controlling factors on strong earthquake activity. This great event with Ms = 8.1 took place probably due to a gradual strengthening background of regional stress field within the Qinghai-Xizang block in the period of acceleration of change of day‘s length and stress triggering from the Mani earthquake.     

Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.     

Gravity variation before Kunlun mountain pass western Ms=8.1 earthquake

The relation between the gravity variation features and Ms=8.1 earthquake in Qinghai-Xizang monitoring area is analyzed preliminarily,by using spatial dynamic variation results of regional gravity field from absolute gravity and relative gravity observation in 1998 and 2000.The results show that:1)Ms\8.1 earthquake in Kulun mountain pass westem occurred in the gravity variation high gradient near gravity‘s high negative variation;2)The Main tectonic deformation and emnergy accumulation before MS=8.1 earthquake are distributed at south side of the epicenter;3)The range of gravity‘s high negative variation at east of the MS=8.1 earthquake epicenter relatively coincides with that rupture region according to field geology investigation;4)Gravity variation distribution in high negative value region is just consistent with the second shear strain‘s high value region of strain field obtained from GPS observation.