论Eppley PIR精密红外辐射仪的测量精度

本文依据红外辐射表(PIR)的结构、性能和工作原理讨论了测量精度及有关影响因素,比较了粗测和精测两种方法的特点,在此基础上提出了各测量方法的适用范围和精度范围以及提高测量精度的措施,同时也给出了一些特定场合下的测量实例及提高测量精度的具体方法。分析表明:精测方法具有很好的测量精度以及很强的环境适应性。粗测在限定的温度范围内具有测量简单、换算方便、易于实现自动化等优点,精度尚能满足一般要求,但在限定的温度范围以外,测量精度急剧恶化。在影响测量精度的各因素中以温度响应中表体热辐射测量的影响最大,在粗测方法中表内电池的性能与测量精度关系重大。强烈日射对测量精度有一定影响,经订正后可基本消除。     

模糊理论在公路边坡稳定性分析中的应用

边坡工程是一个复杂的系统工程。边坡的稳定与否直接关系到其防护工作的程度。因此,如何有效、合理地判断边坡的稳定性对整个工程的经济与社会效益极为重要。影响边坡稳定的因素众多,判断其稳定与否应考虑各因素的综合效果。论文运用模糊理论中的多因素综合评判模型对某高速公路边坡的稳定性进行研究。通过全面考虑影响因素,建立相应的评判因素集及单因素评判矩阵,运用专家评判法和判断矩阵法确定出各因素的权重。最后通过多层次模糊评判得到该边坡的稳定性评判结果。研究证明,该法在边坡稳定性分析评判中是切实可行的。     

河南省平顶山盐田盐矿床成矿特征探讨

以现有钻孔及区域资料为基础，对平顶山盐田盐矿床形成的构造条件和盐湖的沉积模式、沉积类型成矿物源进行了分析，为平顶山盐田的进一步勘查和开发提供了宝贵资料。     

禹州煤田泉店井田构造特征及对其二1煤层的影响

对泉店井田的地质构造进行了分析研究,阐明了断层及褶曲的分布,探讨了井田的构造演化,分析了构造特别是断层对二1煤层的影响,为今后煤矿开发生产提供了可靠的地质依据.     

车载智能地理信息查询系统及其自然语言接口

车载地理查询系统涉及到多方面的软、硬件技术和数据来源；本文提出了车载系统所需具备的主要功能，并对其中所需解决的关键问题进行了讨论。特别是针对如何使车载系统具备一定的智能问题，提出了将自然语言和空间查询语句结合，构造模式库，在自然语言识别处理的基础上，完成自然语言空间查询的方法。     

元数据管理在空间信息共享中的应用

空间信息共享一直以来阻碍着GIS的发展,元数据是解决其共享的技术手段之一。本文在分析元数据和元数据管理存在问题的基础上提出了建立元数据库管理元数据,详细分析了元数据库中元数据定义、元数据查询和元数据编辑这三大管理模块,最后在信息共享平台中,对外建立统一的元数据库访问接口,对内建立针对每个数据源的数据访问引擎,实现实现多源异构分布的空间数据的集成。     

川滇密西西比河谷型铅锌矿床成矿流体来源研究:流体Na-Cl-Br体系的证据

应用流体包裹体滤液分析方法，测定了川滇7个MVT铅锌矿床成矿流体的Na,Cl,Br含量，结果表明成矿流体的x(Na/Br)和x(Cl/Br)的平均值分别为185和73，并与高度蒸发浓缩的残留海水的x(Na/Br)和x(Cl/Br)相近。成矿流体的Na,Cl含量呈正相关，在lgNa-lgCl图解中呈线性分布。根据这些事实以及矿床地质特征，认为原始成矿卤水起源于蒸发浓缩的残留海水，原始含矿卤水与富含有机质的大气降水混合导致矿质沉淀而成矿。     

A scanning electron microscope study of the effects of dynamic recrystallization on lattice preferred orientation in olivine

Effects of dynamic recrystallization on lattice preferred orientation (LPO) in olivine were investigated through the combination of two SEM-based techniques, electron backscattered diffraction (EBSD) technique for crystallographic orientation measurement and backscattered electron imaging (BEI) for dislocation observation. Samples are experimentally deformed olivine aggregates in simple shear geometry. In the sample deformed at T=1473 K and high stresses (480 MPa), only incipient dynamic recrystallization is observed along grain-boundaries. Orientations of these small recrystallized grains are more random than that of relict grains, suggesting an important role of grain-boundary sliding at this stage of recrystallization. In the sample deformed at T=1573 K and low stress (160 MPa), dynamic recrystallization is nearly complete and the LPO is characterized by two [100] peaks. One peak is located at the orientation subparallel to the shear direction and is dominated by grains with high Schmid factor. The other occurs at high angles to the shear direction and is due to the contribution from grains with low Schmid factor. Grains with high Schmid factor tend to have higher dislocation densities than those with low Schmid factor. Based on these observations, we identify two mechanisms by which dynamic recrystallization affects LPO: (1) enhancement of grain-boundary sliding due to grain-size reduction, leading to the modification of LPO caused by the relaxation of constraint for deformation; (2) grain-boundary migration by which grains with lower dislocation densities grow at the expense of grains with higher dislocation densities. Based on the deformation mechanism maps and stress versus recrystallized grain-size relation, we suggest that the first mechanism always plays an important role whereas the second mechanism has an important effect only under limited conditions.     

Modes of raising northeastern Tibet probed by explosion seismology

New wide-angle reflection and refraction seismic data provide constraints on the structure of the upper lithosphere, and test models of its evolution to raise the northeastern part of the Tibetan Plateau. Amplitudes observed for reflections from the crust-mantle boundary are sufficiently large to suggest that there is no significant partial melt in the deep crust. The data show an increase of the crustal thickness between terranes from north of the Kun Lun Fault into the Qang Tang of central Tibet, and a contrast among their intracrustal images and compositions. In the north, P and S velocities are consistent with a dominantly felsic composition and show that only the upper crust thickened. South of the Kun Lun Fault a thicker crust made of two layers could result from the superposition of the originally thin crust of the Bayan Har terrane on the lower part of the crust of the domain to the north, which upper crust it shoved and thickened. Different modes of crustal thickening, either by thickening of individual layers or superpositions and imbrication among them appear to work jointly to raise the topography.     

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.