A model for the representation of emergency cases

The aim of this paper is to propose a location model of earthquake emergency service depot on the basis of hybrid multi-attribute decision-making method. The advantage of the proposed method is that practical mixed uncertainty of location decision information is considered, and the corresponding factors that affect the location of transfer stations are contained. To solve the location problem, a hybrid multi-attribute decision procedure without information transformation is developed. Besides, a novel weighting method and aggregation process is given. Finally, a numerical example is provided to show the feasibility and validity of the proposed method.     

Analysis of estimated satellite clock biases and their effects on precise point positioning

This study provides a systemic analysis to identify the biases in estimated satellite clocks and illustrates their effects in precise point positioning (PPP). First, the precise satellite clock estimation method considering pseudorange and carrier phase hardware delays is derived. Two methods for satellite clock estimation are compared, and their equivalency is discussed. The results show that apart from the well-known constant code hardware biases, the time-variant phase hardware biases are also absorbed by the estimated clocks. Also, the satellite clocks contain biases caused by modeling errors. To analyze the effects of these biases, they are grouped into initial clock biases (ICBs) and time-dependent biases (TDBs). Then, a detailed analysis of the impact of the biases on PPP-based troposphere and coordinate estimates is conducted. The experimental analysis demonstrates that TDBs affect positioning and tropospheric estimates, and their impacts are more significant in the static mode. The ICBs affect coordinate accuracy, zenith total delay mean bias, and its standard deviations only at the millimeter level for kinematic and static PPP, which is negligible. However, the ICBs affect the convergence period for both static and real kinematic PPP, and the magnitude of their impact largely depends on data quality. Note that satellites clocks are generally estimated with the P1/P2 and L1/L2 ionospheric-free combinations, and that hardware-specific parts of ICBs and TDBs cancel if users employ the same type of observables as the clock providers. Otherwise, the effects of biases cannot be ignored, especially for triple-frequency applications. Also, modeling-specific parts of ICBs and TDBs are significant in real-time clocks, which also affect user applications. Our conclusion is applicable for understanding the effects of these biases.     

Improved decentralized multi-sensor navigation system for airborne applications

The integration of Global Navigation Satellite System (GNSS) and Inertial Navigation System (INS) technologies is a very useful navigation option for high-accuracy positioning in many applications. However, its performance is still limited by GNSS satellite availability and satellite geometry. To address such limitations, a non-GNSS-based positioning technology known as “Locata” is used to augment a standard GNSS/INS system. The conventional methods for multi-sensor integration can be classified as being either in the form of centralized Kalman filtering (CKF), or decentralized Kalman filtering. However, these two filtering architectures are not always ideal for real-world applications. To satisfy both accuracy and reliability requirements, these three integration algorithms—CKF, federated Kalman filtering (FKF) and an improved decentralized filtering, known as global optimal filtering (GOF)—are investigated. In principle, the GOF is derived from more information resources than the CKF and FKF algorithms. These three algorithms are implemented in a GPS/Locata/INS integrated navigation system and evaluated using data obtained from a flight test. The experimental results show that the position, velocity and attitude solution derived from the GOF-based system indicate improvements of 30, 18.4 and 20.8% over the CKF- and FKF-based systems, respectively.     

Object- and pixel-based classifications of macroalgae farming area with high spatial resolution imagery

Macroalgae plays an important role in coastal ecosystems. The accurate delineation of macroalgae areas is important for environmental management. This study compared the pixel- and object-based methods using Gaofen satellite no. 2 image to explore an efficient classification approach. Expert system rules and nearest neighbour classifier were adopted for object-based classification, whereas maximum likelihood classifier was implemented in the pixel-based approach. Normalized difference vegetation index, normalized difference water index, mean value of the blue band and geometric characteristics were selected as features to distinguish macroalgae farms by considering the spectral and spatial characteristics. Results show that the object-based method achieved a higher overall accuracy and kappa coefficient than the pixel-based method. Moreover, the object-based approach displayed superiority in identifying Porphyra class. These findings suggest that the object-based method can delineate macroalgae farming areas efficiently and be applied in the future to monitor the macroalgae farms with high spatial resolution imagery.     

Arching effect and displacement on theoretical estimation for lateral force acting on retaining wall

Natural Hazards - A new approach is proposed to evaluate the non-limit active earth pressure in c–φ soil based on the horizontal slices method and limit equilibrium method, which takes...     

埃塞俄比亚西部布雷地区A型花岗岩成因及地质意义

为进一步约束埃塞俄比亚西部地区区域地质构造演化,选取埃塞俄比亚西部布雷地区岩浆岩开展岩石地球化学、年代学等分析.结果显示:布雷岩体具有相对较高的SiO₂(66.4%~68.5%)、K₂O(4.56%~4.87%)及铁值[TFeO/(TFeO+MgO]为0.75~0.79,相对较低的MgO(0.80%~1.3%)、CaO(2.01%~2.36%)和A/CNK(0.89~0.96),富集Zr、Hf、Y、Ga等元素,亏损Sr、P、Ti和Eu元素,显示了A型花岗岩的特征.锆石LA-ICP-MS U-Pb加权平均年龄为631±4 Ma,代表了东非造山运动后伸展阶段.锆石ε_Hf(t)值为3.2~9.1,具有一定的不均一特征.布雷A型花岗岩形成于碰撞造山的后伸展环境.岩石地球化学及Hf同位素特征表明布雷岩体主体可能来源于减薄的岩石圈地幔玄武质岩浆,其后经历了广泛的结晶分异作用而形成.      

西大别地区显著的新元古代岩浆热事件:变花岗岩U-Pb年代学、地球化学及Nd-Hf同位素约束

扬子陆块北缘西大别山地区变质岩系中广泛保留有新元古代岩浆岩,为厘清其原岩成因,对扬子陆块北缘大别区基底性质及新元古代构造-岩浆热事件提供约束,对其中的3处变花岗岩体(五岳山、熊店和方店)的岩石进行了年代学和地球化学分析.结果 显示,3处岩体的原岩均为变质程度较低的二长花岗岩,它们的锆石LA-ICP-MS U-Pb年龄分别为(742±2)Ma、(739±3) Ma和(766±4) Ma,与区域红安岩群和定远组双峰式火山沉积建造在时限上具有可对比性.在地球化学组成上,3处花岗岩均具有较高的SiO2(11.72％～15.26％)和总碱(6.40％～8.70％)含量,K2O/Na2O＞1;富集轻稀土(LaN/YbN为22.98～28.64),负Eu异常不明显,亏损Ba、Nb、Ta、P、Ti和Y元素;Nd同位素初始比值εNd(t)为-15.2～-10.6,tDM2为2.68～2.28 Ga;锆石的Hf同位素初始比值εHf(t)为-13.9～-5.1,tDM2为2.32～1.83 Ga.结合岩石矿物组成、地球化学和Nd-Hf同位素分析认为,3处变花岗岩的原岩均可能为(钙碱性)分异的Ⅰ型花岗岩,系起源于中等深度(压力)条件下的古老地壳物质的重熔.东、西大别地区广泛出露的新元古代中期(780～720 Ma)岩浆岩指示为主动大陆裂谷-拉张伸展背景下构造热事件,可能与Rodinia地幔柱活动有关.     

利用滩坝砂体规模研究古风力的定量恢复*

古风力是一项重要的古气候指标,其定量恢复是一个难题。风作用于水体产生的波浪大小间接地反映了风力,能够为古风力的恢复提供思路。发育于破浪带和冲浪回流带的破浪沙坝、沿岸沙坝分别记录了破浪和冲浪过程,作者分别介绍利用古湖泊中发育的破浪沙坝和沿岸沙坝进行古波况和古风力恢复的原理和操作流程。(1)根据破浪沙坝的几何形态,可以将其厚度与破浪水深建立函数关系,而破浪水深又由破浪波高决定,因此破浪沙坝厚度可以恢复破浪波高,据此可以进一步根据波浪统计关系恢复有效波高、根据风浪关系恢复风力。此方法依托以下3个参数: 单期次的破浪沙坝厚度、破浪沙坝的基座坡角、古风程。(2)沿岸沙坝厚度近似记录了冲浪的极限高度,后者受控于有效波高,据此也可以恢复有效波高和风力。此方法依托以下5个参数: 单期次的沿岸沙坝厚度、古(平均)水深、古风程、古风向相对于岸线的入射角、组成沿岸沙坝的沉积物粒度。上述2种方法综合性较强,涉及古风向、古地形坡度、风程或盆地直径、古水深等参数的恢复,需要综合运用古地貌恢复、去压实校正、古岸线识别、古水深恢复等技术,并需要结合波浪理论。古湖泊滨岸带地层中保存有大量的滩坝沉积,利用其恢复古波况和古风况具有一定的应用前景,能够有助于更详细地重建沉积盆地的古地理背景。