铝硅酸盐矿物和玻璃中Al的配位与局部结构

利用同步辐射的AlK边X射线吸收近进结构（XANES）谱研究了刚玉和铝硅酸盐矿物（蓝晶石,红柱石,夕线石和钠长石）中Al的配位与局部结构,证明该方法可以作为新的结构探针研究结构未知体系中Al的配位与局部结构。例如,Al的K边XANES谱证明在室温压条件,钠长石玻璃中的Al保持为四面体配位（AlIV）,局部结构与钠长石晶体中的Al相似;尽管硬玉晶体中的Al为八面体配位,但硬玉玻璃中的Al变为四面体配位（AlIV）。而在相同的高温压条件（4．4GPa,1575C）下制备的硬玉-钠长石玻璃系列中,压力引起四面体配位的Al变成五次（Alv）和六次配位（AlVl）,且五次和六次配位Al的比例随玻璃中硬玉含量的增加而增大。     

考虑桩端刺入沉降的桩土自平衡式复合地基设计

复合地基的本质是增强体与地基土通过变形协调共同承担上覆荷载。褥垫层的设置起到了协调桩土变形的作用,但褥垫层工作性状及变形特性尚不明确,其厚度设计仍然参考规范依靠经验判断,往往不能充分发挥地基土的承载作用。目前复合地基设计通常采用褥垫层调节桩土变形,而忽略了桩端刺入沉降协调桩土变形来发挥地基土的承载作用,为了利用桩端刺入沉降协调桩土变形,充分发挥桩间土承载的作用,减薄褥垫层或不设褥垫层并减小设计桩长,以期降低地基处理费用,实现桩土共同承担荷载的目的,建立了通过控制桩端刺入沉降协调桩土变形的自平衡式复合地基设计方法。通过与褥垫层方法对比以及工程实例计算,结果表明,该方法可更好地发挥桩土承载作用,为复合地基优化设计提供参考。     

Considerations on the European Standard EN 14157 Test Methods: Abrasion Resistance of Natural Stones Used for Flooring in Buildings

In Europe, the Wide Wheel abrasion (WWA) test and the B?hme abrasion (BA) test are among the most widely used standard test methods for determining abrasion resistance of natural stones, the former being the reference test method in EN 14157 Standard. However, it is stated in the Annex-A (Informative) of EN 14157 Standard that very limited data are available to provide correlations between these two test methods. To be able to fill this gap, in this study, 25 different natural stones belonging to sedimentary, metamorphic and igneous groups were tested for their abrasion resistance as well as physico-mechanical properties. Also, for a better interpretation of abrasion resistance characteristics of the tested stone materials, relationships between abrasion resistance and physico-mechanical properties were statistically examined. A statistically significant linear correlation (R ² = 0.85; P value = 0.000) was established between the WWA test and the BA test, which could be used in practice for converting the measured abrasion resistance values from one testing method to another. It was also found that the correlation between these two test methods improved significantly (R ² = 0.93; P value = 0.001) when relatively high-porosity stone materials (porosity ≥1%) were separately evaluated. Both methods of abrasion resistance employed in the present study showed statistically significant linear correlations with uniaxial compressive strength and Brazilian tensile strength, the former proving to be a more influencing parameter on resistance to abrasion. Also, from the point view of representing actual abrasion mechanism of stone materials in practice, the necessity of simulating multi-directional foot traffic in abrasion testing methods was discussed. In this respect, the reference test method in the EN 14157 Standard was criticized for not fully meeting this requirement. It was also pointed out that the reference method could have some drawbacks when applied to coarse-grained granitic rocks having cleavable minerals such as plagioclase and orthoclase feldspars.     

湘黔地区震旦纪菌藻硅质岩特征及形成机理探讨

湘黔地区震旦纪菌藻硅质岩化学成分纯净,硅质矿物含量95%以上,几乎都为泥晶—微晶石英,石英结晶度平均为6.35。岩石具菌藻生物结构,以纹层状构造为主。其中丰富的菌藻生物化石,按形态可划分为三种类型。岩石属原生沉积成因,二氧化硅的聚沉一方面通过菌藻有机体的硅化作用,另一方面是菌藻生物化学作用引起微环境变化而导致二氧化硅的聚沉。     

A Comparison of Nd Isotopes of Granitoids from the Central Asian Orogenic Belt and Qinling-Dabie Orogen,and Implications for Understanding of Crustal Growth from Accretion to Collision

正Orogens can generally be divided into two types:accretionary and collisional.The fundamental differences in deep-crustal compositions and architecture from accretion to collision and how to identify them is not well understood.This is one of the major aims of the IGCP 662 project (www.igcp662.org.cn).The Central Asian Orogenic Belt (CAOB) is a typical and the world's largest Phanerozoic accretionary orogenic belt and the     

有机蒙脱石层间微结构的分子模拟

采用分子动力学模拟方法,对舍烷基长链阳离子表面活性剂改性有机蒙脱石的层间域内分子环境及烷基长链排列状况进行模拟研究,并考察改性剂负载量与层间域含水量的改变对烷基链排列方式和活动性以及表面活性剂离子中N,C原子的分布状况的影响.1.0倍阳离子交换容量改性的有机蒙脱石在含少量水的情况下(干态),N,C原子均呈双层分布,表明烷基长链为双层平卧排列.含水量的提高(湿态)会导致烷基链从双层分布向在层闻域内均匀分布转变.2.0倍阳离子交换容量改性的有机蒙脱石在舍少量水的情况下(干态),烷基链呈双层倾斜分布于层间域内,烷基链的头部靠近四面体片层.含水量的提高(湿态)对烷基链在层间域内分布状态影响有限,但会导致烷基链整体向层间域中心平面移动,水分子优先占据靠近四面体片层的位置.     

武汉市日供水量与气象要素的相关分析

利用武汉市逐日供水量资料与温度、降水、日照等气象要素进行同步相关分析,选取相关性较高的气温作为预报因子,建立了日供水量的简易预测模型。     

工业部门污染物治理协同控制温室气体效应评价——基于重庆市的实证分析

以高能耗为主要特征的工业部门是大气污染物和温室气体的重要排放源.为推动协同管控,文中结合生态环境部在重庆市组织开展的试点工作,对工业企业NOx污染治理协同控制温室气体的效应进行了量化分析.结果表明,以末端治理为手段的NOx治理措施协同控制温室气体的效果为负,即工业企业去除1 t NOx会直接或间接增加CO2排放1.81...     

南极威德尔海冬季冰脊形拖曳力

利用2006年南极威德尔海冬季科学考察期间由机载激光高度计测得的海冰上表面形态数据,以拖曳分割理论为基础研究了冰脊形拖曳力及其对冰-气总拖曳力的贡献以及中性条件下对应10 m高度处风速的冰-气拖曳系数C_dn(10)。结果显示,在密集冰区,冰脊形拖曳力及其对总拖曳力的贡献随冰脊强度(脊高/脊距)的增大呈递增趋势,而随粗糙长度的增大而减小,对应于威德尔海冬季典型冰脊强度和粗糙长度,占总拖曳力的35%,说明了冰脊形拖曳力在冰-气界面动量交换中的重要作用。C_dn(10)随冰脊强度的增大而增大,但冰脊强度较小时,C_dn(10)随粗糙长度增大而增大;而对较大的冰脊强度,C_dn(10)则随粗糙长度增大而减小。