基于语义的地理信息分类体系对比分析

地理信息分类体系之间的语义不一致性,被认为是影响地理信息系统实现在语义层次上信息共享的最大障碍.首先,本文在阐述中国地理信息分类体系之间参照模式的基础上,提出了一种基于语义的地理信息分类体系对比分析方法.其次,对中国现行的几种地理信息标准分类体系进行了详细的对比分析.最后,为中国地理信息分类体系的编制和修订提出了一些建议.     

大型矿集区的预测方法应用——以巴尔喀什准噶尔成矿带为例

以中亚环巴尔喀什成矿带为典型研究区域,结合地质矿产、地球物理、地球化学和信息科学等信息数据及野外调查成果,以斑岩铜矿为主要矿床类型,以中比例尺对新疆及邻区的跨境巴尔喀什.准噶尔成矿带的含矿潜力进行整体研究.分析中亚大型矿集区成矿地质条件,总结研究区斑岩铜矿成矿规律,建立多元信息综合识别标志及矿床模型.结合空间数据分析技术,以ArcGIS为平台,建立中亚跨境成矿带主、客观模型整合的大型矿集区预测系统,得出中亚成矿带矿集区预测分布图,通过理论研究到技术方法的实现,为境内寻找大型矿集区奠定基础.     

辽宁东五家子金矿矿脉含矿性评价标志研究

辽宁东五家子金矿的矿脉由蚀变岩和石英脉透镜体构成,可采矿体均为硫化物石英脉型.工业矿脉中,石英为烟灰色,发育他形、半自形的细粒黄铁矿等硫化物,有较大规模的矿体.矿化脉中,石英为乳白色,发育粗粒、自形的浅色黄铁矿,无可采矿体.在工业矿脉、次要矿脉、矿化脉的蚀变岩和石英脉样品中,Au,Hg与其他元素的相关性有明显区别.用石英脉样品的As-Ni-Ba图解和蚀变岩样品的Au-Ag-Ba图解预测,矿区外围的西沟1号脉和西沟3号脉属于工业矿脉.     

川西南周公山及邻区下二叠统碳酸盐岩成岩作用对储集性的影响

川西南周公山及邻区下二叠统的中-低孔、中-低渗碳酸盐岩储层的储集空间以次生成因的溶孔、溶洞和构造裂缝为主.研究认为,多世代方解石胶结、化学充填作用以及埋藏期的压实(溶)作用是孔隙很难得到保存的主要原因;同生-准同生期的混合水云化作用和表生期、埋藏期的流体溶蚀作用则产生了大量的次生溶孔、洞,使储层的孔渗性得到明显的改善;构造破裂作用可以产生新的储集空间,还影响各储集体之间及单一储集体内部空隙的连通.成岩相分为混合水云化-溶蚀-破裂相、溶蚀-胶结相和胶结-压实-压溶相.各种成岩作用的叠加形成了现今下二叠统油气储层的分布格局.     

相控建模技术在羊二庄油田的应用

羊二庄油田的明馆储层非均质性严重,高含水、高开发后期的剩余油分布比较复杂,第一次油藏描述中应用传统的确定性建模方法已经不能满足剩余油挖潜的需要.采用RMS相控建模软件,通过构造建模、沉积微相建模、储层物性建模,建立羊二庄油田三维可视化相控地质模型,并实现了与数模软件的无缝接口.     

基于光谱和纹理的SVM矿化蚀变信息提取研究

针对传统矿化信息提取方法单一,利用光谱或纹理、信息量相对较少、需要大量样本的缺陷,利用基于光谱和纹理的支持向量机(SVM)原理,建立矿化信息提取模型.选择青海泽库县析界日地区作为典型研究区.首先提取研究区光谱和纹理信息,选取训练样本;然后求解最优超平面,进而确定决策函数;最后泛化推广识别其他待识别的样本.通过所提取的遥感蚀变异常信息与重砂异常点叠加分析,叠加基本吻合;从野外实地验证来看,均发现了不同程度的矿化现象,并指出了5个重点异常区.     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.     

遥感技术在地质找矿中的应用及发展前景

遥感技术作为矿产勘查的一种手段应用于找矿,并取得了一定成就.遥感技术的直接应用是蚀变遥感信息的提取,遥感技术的间接应用包括地质构造信息、植被的光谱特征及矿床改造信息等方面.遥感找矿具有很大的发展前景的领域主要有:高光谱数据、数据融合技术、3S的紧密结合、计算机技术的发展.     

Geochemistry and environmental effect of cadmium in the super-large Jinding Pb-Zn deposit,Yunnan Province,China

The Jinding Pb-Zn deposit in Yunnan Province is the representative of a Cd-enriched area and mining activities lead to the release of Cd into the hypergenic ecosystem, resulting in Cd pollution. The concentrations of Cd vary greatly from one type to another type of rocks in the mining district. In the host rock, Cd concentrations range from 50×10^-6 to 650×10^-6 with an average of 310×10^-6. In primary ores, Cd concentrations range from 14×10^-6 to 2800×10^-6 with an average of 767×10^-6. However, in oxidized ores, Cd concentrations are highest, varying within the range of 110×10^-6 to 8200×10^-6 , averaging 1661×10^-6. It is shown that the oxidized ores are the main carder and environmental source of Cd. Leaching test showed that Pb/Zn ores are easy to oxidize and thereafter release Cd and other harmful elements. These leached elements in the leachate may be precipitated rapidly in the order of Zn〉Pb〉Cd. As for the concentration distribution of Cd in the Bijiang River, it is estimated to be 15.7 μg/L Cd in water, 49.3 mg/L in suspended substances, and 203.7 mg/L in sediments. The average value of Cd in soil from the polluted area is 83.0 mg/kg. Natural weathering of Cd-rich rocks and minerals imposes a potential environmental risk on the aquatic ecosystem of the Bijiang catchment.