The seepage evolution behavior of compact rock is significant for the stability and safety of many engineering applications. In this research, both hydrostatic and triaxial compression tests were conducted on compact sandstone using an inert gas, namely argon. A triaxial compression test with a water permeability measurement was carried out to study the difference between the gas permeability and water permeability evolutions during the complete stress–strain process. Based on the experimental data, the hydrostatic stress-dependent gas permeability was discussed firstly. A second-order function was proposed to predict and explain the gas slippage effect. The mechanical properties and crack development of the sandstone samples were discussed to better understand the permeability evolution with crack growth during the complete stress–strain process. The results show that the gas permeability evolution can be divided into five stages according to the different crack growth stages. Then, the permeability changes in the crack closure stress \( \sigma_{\text{cc}} \), crack initiation stress \( \sigma_{\text{ci}} \), crack damage stress \( \sigma_{\text{cd}} \) and peak stress \( \sigma_{\text{p}} \) with confining pressures were analyzed. Finally, we found that the difference between the corrected gas permeability and water permeability can be attributed to the interaction between the water and sandstone grains. 相似文献
High-resolution loess deposits are widely distributed in Arid Central Asia (ACA) and provide important records associated with dust transportation, paleoenvironmental and paleoclimatic evolution. The chronology is the foundation of the research into loess deposits as an environmental archive. In recent decades, the gradually developed optical dating method has been increasingly matured and become an important approach to establishing the loess-paleosol sequences. Here, we summarized and discussed previous work on loess chronology mainly based on optical dating approach in ACA. The following understandings have been listed: ① In comparison with optical dating method, the suitable material for 14C dating is uncommon in ACA. However, the dating range of luminescence dating is more extensive, and the dating materials are accessible. Thus, the optical dating is widely applicable in the establishment of loess framework in this area. ② Until now, the quartz Single Aliquot Regeneration (SAR) method can be applied to the establishment of loess-paleosol sequence since last glacial period. But several issues remain unaddressed. For example, the Optically Stimulated Luminescence (OSL) signal sensitivity of quartz grains are low in some areas. Furthermore, the results of OSL dating of different grain sizes within a single sample are inconsistent in some areas. The solution of these problems still requires more methodological research. ③ The post-IR IRSL (pIRIR) and multiple elevated temperature stimulation (MET-pIRIR) protoCols of feldspar have basically overcome the anomalous fading issue in the traditional IRSL dating process. In ACA, the framework since MIS 7 can be established with K-feldspar luminescence dating method. Compared with quartz luminescence characteristics, the K-feldspar luminescence signals are more sensitive and exhibit a high saturation level. In specific applications, it is necessary to establish the age frame according to the luminescence sensitivity, the age of samples or other factors. 相似文献
Network-based ambiguity resolution (AR) between reference stations is the prerequisite to realize a precise real-time kinematic positioning service. With the help of BDS triple-frequency signals, we can efficiently deal with the ionospheric delay and tropospheric delay, and achieve rapid and reliable AR. To overcome the inaccurate ionospheric delay estimated by the geometry-free three carrier ambiguity resolution (GF TCAR) technique, which leads to failure in the original ambiguity resolution, we propose an ionospheric-free (IF) TCAR method to resolve the ambiguity between the reference stations over long baselines. Taking full advantage of the known positions of the reference stations, the easily resolved extra-wide-lane (EWL) ambiguity, and the IF phase combinations, we can reliably fix the wide-lane (WL) ambiguity. A Kalman filter is applied to estimate precise IF ambiguities and the original ambiguity is resolved with the fixed WL ambiguity. A numerical analysis with triple-frequency BDS data from three long baselines of a CORS network is provided to compare the AR performance of GF TCAR with that of IF TCAR. The results show that both methods can reliably resolve the WL ambiguity with a remarkable correctly-fixed rate of higher than 99%, and the reliably-fixed rates of the IF TCAR slightly increase from 92.19, 94.67 and 94.61–98.26, 99.54 and 97.51% for the three baselines. Herein “correctly-fixed” and “reliably-fixed” mean the difference between the float ambiguity and the true one are less than ± 0.5 and ± 0.25 cycles, respectively. On the other hand, the AR performance of the original signals with the IF TCAR method is much better than that with the GF TCAR method attaining a 100% correctly-fixed rate, while the GF TCAR method can hardly fix the original ambiguity with the largest bias being as much as 4 cycles because of the amplified systematic bias. 相似文献
Integrity monitoring for ambiguity resolution is of significance for utilizing the high-precision carrier phase differential positioning for safety–critical navigational applications. The integer bootstrap estimator can provide an analytical probability density function, which enables the precise evaluation of the integrity risk for ambiguity validation. In order to monitor the effect of unknown ambiguity bias on the integer bootstrap estimator, the position-domain integrity risk of the integer bootstrapped baseline is evaluated under the complete failure modes by using the worst-case protection principle. Furthermore, a partial ambiguity resolution method is developed in order to satisfy the predefined integrity risk requirement. Static and kinematic experiments are carried out to test the proposed method by comparing with the traditional ratio test method and the protection level-based method. The static experimental result has shown that the proposed method can achieve a significant global availability improvement by 51% at most. The kinematic result reveals that the proposed method obtains the best balance between the positioning accuracy and the continuity performance. 相似文献
This study provides a systemic analysis to identify the biases in estimated satellite clocks and illustrates their effects in precise point positioning (PPP). First, the precise satellite clock estimation method considering pseudorange and carrier phase hardware delays is derived. Two methods for satellite clock estimation are compared, and their equivalency is discussed. The results show that apart from the well-known constant code hardware biases, the time-variant phase hardware biases are also absorbed by the estimated clocks. Also, the satellite clocks contain biases caused by modeling errors. To analyze the effects of these biases, they are grouped into initial clock biases (ICBs) and time-dependent biases (TDBs). Then, a detailed analysis of the impact of the biases on PPP-based troposphere and coordinate estimates is conducted. The experimental analysis demonstrates that TDBs affect positioning and tropospheric estimates, and their impacts are more significant in the static mode. The ICBs affect coordinate accuracy, zenith total delay mean bias, and its standard deviations only at the millimeter level for kinematic and static PPP, which is negligible. However, the ICBs affect the convergence period for both static and real kinematic PPP, and the magnitude of their impact largely depends on data quality. Note that satellites clocks are generally estimated with the P1/P2 and L1/L2 ionospheric-free combinations, and that hardware-specific parts of ICBs and TDBs cancel if users employ the same type of observables as the clock providers. Otherwise, the effects of biases cannot be ignored, especially for triple-frequency applications. Also, modeling-specific parts of ICBs and TDBs are significant in real-time clocks, which also affect user applications. Our conclusion is applicable for understanding the effects of these biases. 相似文献
Landslides - In this paper, the slope rock mass is numerically characterized by considering hydraulic and mechanical properties using two distinct element models. The flow rate and permeability are... 相似文献
Discrete element method has been widely adopted to simulate processes that are challenging to continuum-based approaches. However, its computational efficiency can be greatly compromised when large number of particles are required to model regions of less interest to researchers. Due to this, the application of DEM to boundary value problems has been limited. This paper introduces a three-dimensional discrete element–finite difference coupling method, in which the discrete–continuum interactions are modeled in local coordinate systems where the force and displacement compatibilities between the coupled subdomains are considered. The method is validated using a model dynamic compaction test on sand. The comparison between the numerical and physical test results shows that the coupling method can effectively simulate the dynamic compaction process. The responses of the DEM model show that dynamic stress propagation (compaction mechanism) and tamper penetration (bearing capacity mechanism) play very different roles in soil deformations. Under impact loading, the soil undergoes a transient weakening process induced by dynamic stress propagation, which makes the soil easier to densify under bearing capacity mechanism. The distribution of tamping energy between the two mechanisms can influence the compaction efficiency, and allocating higher compaction energy to bearing capacity mechanism could improve the efficiency of dynamic compaction.
Upon completion, China’s national emissions trading scheme (C-ETS) will be the largest carbon market in the world. Recent research has evaluated China’s seven pilot ETSs launched from 2013 on, and academic literature on design aspects of the C-ETS abounds. Yet little is known about the specific details of the upcoming C-ETS. This article combines currently understood details of China’s national carbon market with lessons learned in the pilot schemes as well as from the academic literature. Our review follows the taxonomy of Emissions Trading in Practice: A Handbook on Design and Implementation (Partnership for Market Readiness & International Carbon Action Partnership. (2016). Retrieved from www.worldbank.org): The 10 categories are: scope, cap, distribution of allowances, use of offsets, temporal flexibility, price predictability, compliance and oversight, stakeholder engagement and capacity building, linking, implementation and improvements.
Key policy insights
Accurate emissions data is paramount for both design and implementation, and its availability dictates the scope of the C-ETS.
The stakeholder consultative process is critical for effective design, and China is able to build on its extensive experience through the pilot ETSs.
Current policies and positions on intensity targets and Clean Development Mechanism (CDM) credits constrain the market design of the C-ETS.
Most critical is the nature of the cap. The currently discussed rate-based cap with ex post adjustment is risky. Instead, an absolute, mass-based emissions cap coupled with the conditional use of permits would allow China to maintain flexibility in the carbon market while ensuring a limit on CO2 emissions.