The state of land subsidence and prediction approaches due to groundwater withdrawal in China

This article gives a general introduction to land subsidence with the prediction approaches due to withdrawal of groundwater in three subsided/subsiding regions in China: the deltaic plain of Yangtse River (YRDP), North China Plain (NCP), and Fenwei Plain (FP). On YRDP, Shanghai is the typical subsided/subsiding city; on NCP Tianjin is the typical subsided/subsiding city, and on FP Taiyuan is the typical subsided/subsiding city. The subsided area with subsidence over 200 mm on YRDP is about 10,000 km² and the maximum subsided value reached 2.9 m at Shanghai; on NCP the subsided area reached 60,000 km² with the maximum subsidence of 3.9 m at Tianjing; on FP the subsided area is relatively smaller than that on the other two plains and is about 1,135 km² with maximum subsidence of 3.7 m at Taiyuan city. In order to protect the civil and industrial facilities, it is necessary to predict the future development of land subsidence based on present state. Many researchers proposed several approaches to predict the land subsidence due to groundwater withdrawal according to different geological conditions and groundwater withdrawal practice. This article classifies these approaches into five categories: (i) statistical methods; (ii) 1D numerical method; (iii) quasi-3D seepage model; (iv) 3D seepage model; (v) fully coupled 3D model. In China, the former four categories are presently employed in the prediction practice and their merits and demerits are discussed. According to the prediction practice, 3D seepage model is the best method presently.     

苏北盘石山、练山地幔捕虏体的PGE地球化学

通过锍镍火试金预富集法,分析了位于郯庐断裂带东侧的盘石山、练山地幔橄榄岩包体中铂族元素(PGE)和Au含量.不同于部分熔融残留成因地幔橄榄岩中通常所观察到的负斜率型或平坦型的分布模式,这两地的地幔橄榄岩以Pt、Pd、Ru相对富集,Ir、Rh相对亏损的"燕子型"分布模式为特征.Pt、Pd等不相容元素富集说明上地幔除经历过早期的部分熔融外,还经历了后期富Pt、Pd的高熔/岩比的熔(流)体的层析分离交代作用影响.盘石山地幔橄榄岩的PGE总量比练山高,Os的含量也比原始地幔值高;而练山地幔橄榄岩的Os含量比原始地幔值低,说明交代作用带走了练山地幔橄榄岩中的Os,却没有很大改变盘石山地幔橄榄岩中的Os含量,这可能与交代熔(流)体含硫量饱和程度有关.Rh的负异常可能与部分熔融过程中熔体较低的fo2有关.     

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.     

Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Biogeochemical characteristics of the Hetai goldfield, Guangdong Province, China

In the Hetai goldfield, Guangdong Province, China, samples including rocks, soils and leaves of four plants (Pinus massoniana, Rhodomyrms tomenlosa, D. linearis var. dichotoma and Embelia laeta) collected from the gold mineralization zone and the background area were analyzed for Au, Ag, Cu, Pb, Zn, Hg, As and physiological parameters. The objective of this investigation is to study the geochemical and biogeochemical characteristics of studied plants, aiming at biogeochemical methods in Au exploration. The goldfield region shows geochemical and biogeochemical anomalies. Abundances of Au in rocks, soils, plants and the leaf pigments in the mineralized area are much higher than those in the surrounding region. The plants display unhealthy physiological and ecological characteristics in the Hetai goldfield area. The cell structures of the goldfield plants were anomalous and aberrant, and there were many nano-metal particles diffused in mitochondria and chloroplasts. Macro- and microscopic evidences of the vegetation in the goldfield areas are distinctly different from the background regions. The strongly anomalies in responses to Au are profound in further geochemical and botanic exploration studies.     

Flexural isostatic response of the Alps to increased Quaternary erosion recorded by foreland basin remnants,SE France

We test the hypothesis that flexural isostatic compensation of the mass removed by enhanced Quaternary erosion is responsible for uplift of the Western European Alps and their forelands. We use two well‐preserved and well‐dated (1.8 Ma) abandonment surfaces of foreland basin remnants in SE France (the Chambaran and Valensole plateaux) as passive benchmarks for tilting of the foreland. Estimating their initial slope from morphometric scaling relationships, we determine bulk post‐depositional tilting of 0.5–0.8% for these surfaces. The calculated isostatic response of the Alpine lithosphere to erosional unloading, using the method recently proposed by Champagnac et al. [Geology 35 (2007) 195–198] , yields a predicted tilting of 0.3–0.4% in the considered areas, explaining approximately half of the determined post‐depositional tilting. Such long‐term deformation being insensitive to cyclic loading/unloading because of glaciations, we suspect the other half to be related to as yet undetermined long‐wavelength and long‐lived tectonic process(es).     

双液静压注浆在丰沙线35号桥卵漂石地层的应用

在丰沙线35号桥加固工程的4、5号墩钻孔灌注桩施工中,采用回转滚刀钻进卵漂石地层,为确保孔壁稳定,对桩孔壁进行了双液注浆.在注浆孔成孔、压浆管安放、孔口架桥封堵及双液压浆过程中遇到了较多棘手问题,经施工现场多次试验和改进,解决了双液浓度及注入配比、架桥封堵孔口、双液分离注浆、窜浆处理和合理压浆量控制等技术难题,并取得了理想的注浆效果,确保了钻孔灌注桩顺利进行.     

奎屯河流域南洼地地下水补给特征分析

独山子石油化工基地第二水源地(简称二水源)位于新疆奎屯河流域南洼地,认识和掌握南洼地地下水补给特征是研究和评价独山子石化基地用水保障程度的重要基础。通过南洼地地下水和主要河流的水化学、环境同位素特征分析,对南洼地地下水的补给得到如下认识:二水源西北缘和中部主要接受奎屯河、小巴音沟水的补给,其东南缘主要接受乌兰布拉克沟和乔路特沟地表水的补给;就整个二水源来讲,奎屯河与小巴音沟的补给是主要的。     

基于分布式水文模拟的三峡区间洪水预报(Ⅰ)——模型构建及验证

长江三峡区间因暴雨形成的洪水峰高量大,对三峡水库的防洪安全和运行调度的影响很大.本论文依据三峡地区的地形地貌特征,采用基于GIS的机理性分布式水文模型,来模拟三峡区间入库洪水,以尽量减少洪水预报中的不确定性.利用近期建成的78个自动雨量站网监测的小时降雨信息作为模型的输入,对模型参数进行了率定和验证,结果表明:大多数洪水过程的模拟精度较好,但也有的模拟结果较差,其中降雨信息缺失是洪水预报不确定性的主要来源.