青藏高原大气—植被相互作用的模拟试验Ⅱ.植被叶面积指数和净初级生产力

利用大气－植被相互作用模式AVIM对青藏高原上30个站点进行模拟计算，给出了青藏高原上植被叶面积指数和净初级生产力的分布特征。模拟结果表明，高原上叶面积指数、净初级生产力由东南向西北减少，模拟和观测的分布相一致。分析指出，青藏高原净初级生产力的分布决定于水热条件的共同作用，降水充沛、温度适宜的青藏高原东南部净初级生产力较高，而青藏高原西北部由于降水过少或温度过低，初级生产力很低。     

Direct detection of the secondary spectrum of the interacting eclipsing binary TX UMa

Eclipsing binary TX UMa was observed with the D.A.O. high-dispersion spectrographs in 1969–1970, with emphasis on the detailed coverage of the primary minimum. One spectrum was taken exclusively within totality, thus exhibiting an uncontaminated spectrum of the secondary component. This leads to spectral reclassification of the secondary (F6 IV). The narrowing of the line profile of the H-line in totality is interpreted in terms of synchronous rotation of the secondary (v sini80 km s^–1) while the primary rotates faster (v sini130 km s^–1) than synchronously (v sini50 km s^–1). Although the secondary does not fill in its Roche lobe fully, the system exhibits pronounced indications of rather strong physical interaction. This is now supported also by the profound changes of the line profiles of the H-line with phase.     

湖泊沉积物中元素相态的连续提取分析—以岱海为例

如何利用湖泊/海洋沉积物地球化学代用指标有效地指示环境很大程度取决于元素的来源及其在沉积物中赋存形态的确定.对位于半干旱区的内蒙古岱海14个沉积物样品的连续提取实验及18个元素在水可溶态、可交换态、碳酸盐结合态、铁锰氧化物结合态、有机物结合态及残留态等六种赋存相态中含量变化进行了测试和研究,结合沉积物的矿物组成,结果表明在岱海流域内只经历了较弱的化学风化过程,除了Ca和Sr外,其他元素主要赋存于残留态中,只发生了很小程度的活化溶解.受元素亲合性和湖水物理化学状态的制约,出溶的Sr与Ca的赋存相态基本一致,而出溶的Pb、Be、Co、Cu、K、Mn、Fe等元素则与自生碳酸盐、有机质表现出一定的亲合性.元素在不同赋存相态中分布为地球化学环境代用指标的提取和解释提供了机理性的实验依据.     

云南省食用菌产业物流网络研究

构建合理高效的农产品物流网络,是实现农产品流通与增值并促进区域农业发展的重要基础。为构建云南省食用菌物流网络,分析了2004—2015年食用菌产业数据,揭示了食用菌产业的分散化、边缘化、不均衡的空间分布特征。从资源状况、社会经济、交通区位3个方面提出了物流节点等级的评价指标体系。依据货运联系强度模型确定轴心城市辐射范围,构建了以昆明市、曲靖市、楚雄州为中心城市圈,辐射带动滇东北、滇南的滇中食用菌物流圈和以大理州为物流核心、辐射带动滇西北地区的滇西食用菌物流圈。并以此形成云南省食用菌轴辐式物流网络。     

Estimation of spawning area of <Emphasis Type="Italic">Pisodonophis sangjuensis</Emphasis> Ji and Kim, 2011 (Pisces: Ophichthidae) based on leptocephali size and distribution

Pre-metamorphic leptocephali of Pisodonophis sangjuensis (n = 91, 10.4?90.2 mm in total length, TL) were collected in the East China Sea for the first time. Pre-metamorphic leptocephali of P. sangjuensis, which were identified using mitochondrial DNA cytochrome c oxidase subunit I gene (mtDNA COI), are characterized by various combinations of morphological characters: 8 moderate to pronounced gut loops with the kidney terminating on the 6-7th loops; and 8 subcutaneous pigment patches on the tail just ventral to the notochord. Pisodonophis sangjuensis leptocephali were more numerously collected offshore than inshore around Jeju Island. The smallest leptocephali (< 15.0 mm TL) were collected from the south far from Jeju Island, and the largest leptocephali (> 100.0 mm TL) were collected from around Jeju Island and the southern coast of Korea. Our findings indicate that P. sangjuensis spawns offshore south of Jeju Island that is an area associated with high water temperature, and then the hatched leptocephali are transported to Jeju Island or the southern coast of Korea by the Tsushima Warm Current.     

A new method for platform design based on parametric technology

A new method for platform design, named parametric platform design method (PPDM), is presented in this paper in order to improve the mobile platform design efficiency. In this method, an integrated parametric system that fully considers the characteristics of the platform is developed, which significantly optimizes the design process with the top–bottom design concept. In the parametric system, the main geometric dimensions are taken as parameters, while the topology between the structure members, the function requirements and the safety requirements are converted into geometric constraints. By geometric constraint solving (GCS), a set of parameters that satisfy all the given constraints are determined, and then the design scheme is obtained by several core algorithms, such as parametric tank subdivision, 3D stability calculation, parametric structure design, FEM preprocessing, etc. The parametric method greatly increases the changeability and the reusability of the platform model, and concurrent design is well supported. As the model is driven by parameters, PPDM is an excellent method for optimization design. As a result, PPDM has incomparable advantages on the design efficiency over traditional methods.     

电解法处理船舶压载水的杀菌性能及机理研究

船舶压载水携带的微生物对目的海域的污染问题亟待解决。采用电解法,以渤海湾的海水为处理对象,以炭纤维材料为阴极,分别以碳棒、碳板和炭纤维为阳极,首先考察了施电2.00 V下3种阳极炭材料对应的杀菌效果,进而重点考查了碳板为阳极材料时施加不同槽压下的杀菌性能,并对其杀菌机理进行初步分析。结果表明,3种阳极材料对应的杀菌效果先后顺序为碳棒碳板炭纤维,各自的杀菌效果均较为明显,施电18 min时碳板对应的灭活率可达100%;以碳板为阳极时,施加槽压越高杀菌效果越显著,本研究范围内以1.81 V为佳,施电18 min时灭活率在99%以上;不同槽压下体系中氯离子浓度和p H都随时间整体呈减小趋势,一定程度上可用于解释杀菌作用过程。研究结果可为电解法处理船舶压载水提供参考和借鉴。     

协同多时相波谱特征的不透水面信息级联提取

不透水面作为反应城市表征变化和区域城镇化的重要技术指标,其位置、图斑大小、空间分布等信息在地表水热循环和能量平衡等领域被广泛需求。传统方法大都基于单一时相信息提取不透水面,而忽略多时相所蕴含的丰富信息。因此,本文提出多时相信息融合的不透水面级联提取方法,利用Landsat-8 OLI遥感影像分析归一化植被指数（Normalized Difference Vegetation Index, NDVI）、改进的归一化水体指数（Modified Normalized Difference Water Index, MNDWI）和归一化建筑指数（Normalized Difference Building Index, NDBI）年内时序变化特点和典型地物间多时相波谱曲线的协同特征,并归纳不透水面多时相变化规律;再根据先验知识所获取的有效地表信息,进行多时相分级提取不透水面信息。此外,基于实地考察数据和同期2 m GF-1遥感影像屏幕数字化生成30 m不透水面图斑,进行精度验证、分析和对比单时相、四季相及多时相3种时序情况下的提取精度。结果表明：单时相提取不透水面总精度最低,四季相提取精度优于单时相,而多时相提取精度最高（精度可达93.66%,Kappa系数为0.81）。本方法在偏远城镇不透水面的有效识别中显露潜在优势,可为不透水面提取方法融合时序波谱特征提供新思路。