Influence of Mussel Culture on the Vertical Export of Phytoplankton Carbon in a Coastal Upwelling Embayment (Ría de Vigo,NW Iberia)

The goal of this paper is to find out whether suspended mussel culture affects the vertical fluxes of biogenic particles in the Ría de Vigo on a seasonal scale. With this aim, vertical fluxes of particulate organic carbon (POC) and the magnitude and composition of vertical export of phytoplankton carbon (Cphyto) collected in sediment traps were examined by comparing data obtained inside a mussel farming area (RaS) with those found at a reference station (ReS) not affected by mussels. Our results indicate that mussel farming has a strong impact on sedimentation fluxes under the rafts, not only increasing POC flux but also altering the magnitude and composition of Cphyto fluxes. Average POC flux at RaS (2564?±?1936 mg m^?2 day^?1) was four times higher than at ReS (731?±?276 mg m^?2 day^?1), and much of this increase was due to biodeposit fluxes (Cbiodep) which accounted for large proportion of POC flux (35–60 %). Indeed, because of this high Cbiodep flux, only a small proportion of the POC flux was due to Cphyto flux (3–12 %). At the same time, we observed an increased sedimentation of phytoplankton cells at RaS that could be explained by a combination of mechanisms: less energetic hydrodynamic conditions under mussel rafts, ballast effect by sinking mussel feces, and diatom aggregates. Moreover, mussel farming also altered the quality of the Cphyto flux by removing part of the predatory pressure of zooplankton and thus matching diatom composition in water column and sediment traps.     

Changing human-environment interactions in medium mountains: the Apuseni Mts (Romania) as a case study

The study of human-environment relationships in mountain areas is important for both theoretical and practical reasons, as many mountain areas suffer similar problems, such as depopulation, unemployment and natural hazards. Medium mountains constitute a special case within mountains, because they are more populated but less attractive as tourist destinations than high mountains. In this context, the Apuseni Mts (Romania) are considered as a case study. In this paper, we apply GIS-based, quantitative methods to characterize the strength and dynamics of human-environment interactions, taking into consideration some environmental factors (elevation, relative height, slope, river distance, lithology, land cover, natural attractions) as well as historical population and recent tourism data. We found that population density has strong (r ²>0.8) relationships with all relief factors (elevation, relative height, slope, river distance), and that best-fit functions are nonlinear. We outlined the varying demographic scenarios by elevation zones and interpreted the historically switching sign of population change versus elevation relationship. We demonstrated that lithology also has an impact on the spatial distribution of population, although it is not independent from the relief effect. The land cover of the mainly cultural landscape is very strongly correlated with relief parameters (especially slope), which suggests good adaptation. We pointed out the dominance of karst objects in the natural tourism potential of the Apuseni Mts and also explored further components of real tourism (spas, heritage, towns). Finally, we concluded that the environmental settings investigated do in fact constrain the spatial framework of society, but socio-economic changes in history can be explained from the side of society, which conforms to the theory of cultural possibilism.     

Market-driven organizational lock-in: A case study of a former first mover

ABSTRACT

The article addresses the question of how an innovative firm develops from being a first mover to an innovation laggard and whether this process can be reversed. Informed by the evolutionary perspective and path-dependence theory, the authors explore how a low-tech Norwegian firm in the oil and gas industry has lost its foothold as an innovator. They also employ the concept of organizational architecture as an analytical tool to investigate the agency for breaking organizational paths. Through participant observation and semi-structured interviews, their study revealed that the innovation activity of the case firm is in a state of lock-in following a path-dependence development. Product development in the firm is linked to incremental changes to existing products based on the feedback from the customer, and the process is characterized by knowledge exploitation rather than knowledge exploration. The article adds to the literature on path dependence by identifying how a strong market pull can be a driver for organizational path dependence and lock-in.     

Bioerosion and encrustation rates in recent mollusk death assemblages on a supratidal siliciclastic setting,Playa Norte,Veracruz State,Mexico

This study presents both qualitative and quantitative data regarding marine mollusk (gastropods and bivalves) shell bioerosion and encrustation based on death assemblages obtained from a recent supratidal environment in Playa Norte, Veracruz State. The objectives of this study were to assess the nature of bioerosion and encrustation processes and to investigate the role of these taphonomic features contributing to the deterioration of natural shell accumulations within a tropical siliciclastic tidal environment. The assemblage comprises 31 species: 13 gastropods and 18 bivalves. The bioerosion and encrustation degrees were low to moderate for both types. The most abundant traces were predatory gastropod structures (Oichnus paraboloides and O. simplex), whereas sponge borings (Entobia isp.), polychaete dwellings (Caulostrepsis taeniola), and echinoid raspings (Gnatichnus isp.) were less frequent. The encrusting organisms include polychaete serpulids, bryozoans, and rare foraminifers (Homotrema rubrum). Because of the low bioerosion and encrustation degrees occurring in this area, accumulation is expected to predominate over biotic destruction. As deposition conditions (richly fossiliferous carbonate sandstone beds) were similar to those prevailing in the Tuxpan Formation during the Miocene (Langhian), it is suggested that this study provides an equivalent reference to interpret mollusk fossil assemblages located in this site.     

Carbon and nitrogen isotope,and mineral inclusion studies on the diamonds from the Pozanti–Karsanti chromitite,Turkey

The Pozanti–Karsanti ophiolite (PKO) is one of the largest oceanic remnants in the Tauride belt, Turkey. Micro-diamonds were recovered from the podiform chromitites, and these diamonds were investigated based on morphology, color, cathodoluminescence, nitrogen content, carbon and nitrogen isotopes, internal structure and inclusions. The diamonds recovered from the PKO are mainly mixed-habit diamonds with sectors of different brightness under the cathodoluminescence images. The total δ¹³C range of the PKO diamonds varies between ??18.8 and ??28.4‰, with a principle δ¹³C mode at ??25‰. Nitrogen contents of the diamonds range from 7 to 541 ppm with a mean value of 171 ppm, and the δ¹⁵N values range from ??19.1 to 16.6‰, with a δ¹⁵N mode of ??9‰. Stacking faults and partial dislocations are commonly observed in the Transmission Electron Microscopy foils whereas inclusions are rather rare. Combinations of (Ca_0.81Mn_0.19)SiO₃, NiMnCo-alloy and nano-sized, quenched fluid phases were observed as inclusions in the PKO diamonds. We believe that the ¹³C-depleted carbon signature of the PKO diamonds derived from previously subducted crustal matter. These diamonds may have crystallized from C-saturated fluids in the asthenospheric mantle at depth below 250 km which were subsequently carried rapidly upward by asthenospheric melts.     

Experimental study of quartz inclusions in garnet at pressures up to 3.0 GPa: evaluating validity of the quartz-in-garnet inclusion elastic thermobarometer

Garnet crystals with quartz inclusions were hydrothermally crystallized from oxide starting materials in piston–cylinder apparatuses at pressures from 0.5 to 3 GPa and temperatures ranging from 700 to 800 °C to study how entrapment conditions affect remnant pressures of quartz inclusions used for quartz-in-garnet (QuiG) elastic thermobarometry. Systematic changes of the 128, 206 and 464 cm^?1 Raman band frequencies of quartz were used to determine pressures of quartz inclusions in garnet using Raman spectroscopy calibrations that describe the P–T dependencies of Raman band shifts for quartz under hydrostatic pressure. Within analytical uncertainties, inclusion pressures calculated for each of the three Raman band frequencies are equivalent, which suggests that non-hydrostatic stress effects caused by elastic anisotropy in quartz are smaller than measurement errors. The experimental quartz inclusions have pressures ranging from ??0.351 to 1.247 GPa that span the range of values observed for quartz inclusions in garnets from natural rocks. Quartz inclusion pressures were used to model P–T conditions at which the inclusions could have been trapped. The accuracy of QuiG thermobarometry was evaluated by considering the differences between pressures measured during experiments and pressures calculated using published equation of state parameters for quartz and garnet. Our experimental results demonstrate that Raman measurements performed at room temperature can be used without corrections to estimate garnet crystallization pressures. Calculated entrapment pressures for quartz inclusions in garnet are less than ~?10% different from pressures measured during the experiments. Because the method is simple to apply with reasonable accuracy, we expect widespread usage of QuiG thermobarometry to estimate crystallization conditions for garnet-bearing silicic rocks.     

An experimental study of Fe–Ni exchange between sulfide melt and olivine at upper mantle conditions: implications for mantle sulfide compositions and phase equilibria

The behavior of nickel in the Earth’s mantle is controlled by sulfide melt–olivine reaction. Prior to this study, experiments were carried out at low pressures with narrow range of Ni/Fe in sulfide melt. As the mantle becomes more reduced with depth, experiments at comparable conditions provide an assessment of the effect of pressure at low-oxygen fugacity conditions. In this study, we constrain the Fe–Ni composition of molten sulfide in the Earth’s upper mantle via sulfide melt–olivine reaction experiments at 2 GPa, 1200 and 1400 °C, with sulfide melt \(X_{{{\text{Ni}}}}^{{{\text{Sulfide}}}}=\frac{{{\text{Ni}}}}{{{\text{Ni}}+{\text{Fe}}}}\) (atomic ratio) ranging from 0 to 0.94. To verify the approach to equilibrium and to explore the effect of \({f_{{{\text{O}}_{\text{2}}}}}\) on Fe–Ni exchange between phases, four different suites of experiments were conducted, varying in their experimental geometry and initial composition. Effects of Ni secondary fluorescence on olivine analyses were corrected using the PENELOPE algorithm (Baró et al., Nucl Instrum Methods Phys Res B 100:31–46, 1995), “zero time” experiments, and measurements before and after dissolution of surrounding sulfides. Oxygen fugacities in the experiments, estimated from the measured O contents of sulfide melts and from the compositions of coexisting olivines, were 3.0?±?1.0 log units more reduced than the fayalite–magnetite-quartz (FMQ) buffer (suite 1, 2 and 3), and FMQ ??1 or more oxidized (suite 4). For the reduced (suites 1–3) experiments, Fe–Ni distribution coefficients \(K_{{\text{D}}}^{{}}=\frac{{(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}/X_{{{\text{Fe}}}}^{{{\text{sulfide}}}})}}{{(X_{{{\text{Ni}}}}^{{{\text{olivine}}}}/X_{{{\text{Fe}}}}^{{{\text{olivine}}}})}}\) are small, averaging 10.0?±?5.7, with little variation as a function of total Ni content. More oxidized experiments (suite 4) give larger values of K_D (21.1–25.2). Compared to previous determinations at 100 kPa, values of K_D from this study are chiefly lower, in large part owing to the more reduced conditions of the experiments. The observed difference does not seem attributable to differences in temperature and pressure between experimental studies. It may be related in part to the effects of metal/sulfur ratio in sulfide melt. Application of these results to the composition of molten sulfide in peridotite indicates that compositions are intermediate in composition (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.4–0.6) in the shallow mantle at 50 km, becomes more Ni rich with depth as the O content of the melt diminishes, reaching a maximum (0.6–0.7) at depths near 80–120 km, and then becomes more Fe rich in the deeper mantle where conditions are more reduced, approaching (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.28)?>?140 km depth. Because Ni-rich sulfide in the shallow upper mantle melts at lower temperature than more Fe-rich compositions, mantle sulfide is likely molten in much of the deep continental lithosphere, including regions of diamond formation.