High resolution seismic investigations for the determination of water flow directions during sulphur deposits exploitation

This paper shows the results of seismic research on some problems of sulphur in-situ mining. The difficulties during exploitation were mainly connected with the lack of detailed information on the structure and tectonics of deposit and overburden strata. This kind of information could be obtained using the High Resolution Seismic method. The use of seismic method allows to determine the range of subsidence provoked by well mining of sulphur. It is very important to undertake the measurements before exploitation, because the comparison of seismic sections before and during exploitation creates a possibility of determining the process of changes in the structure of the deposit and overburden strata.     

Viability of pyrite pulled metabolism in the ‘iron-sulfur world’ theory: Quantum chemical assessment

The viability of pyrite-pulled metabolism in the ‘iron-sulfur world’ theory was assessed using a simple model of iron-nickel sulfide (Fe-Ni-S) surface and data obtained from quantum chemical calculations. We have investigated how the individual reactions in the carbon fixation cycle (carboxylic acids formation) on an Fe-Ni-S surface could have operated to produce carboxylic acids from carbon oxide and water. The proposed model cycle reveals how the individual reactions might have functioned and provides the thermodynamics of each step of the proposed pathway. The feasibility of individual reactions, as well the whole cycle was considered. The reaction of acetic acid production from CH₃SH and CO on an Fe-Ni sulfide surface was revealed to be endergonic with a few partial steps having positive Gibbs free energy. On the other hand, the pyrite formation was found to be slightly exergonic. The significance of the catalytic activity of transition metal sulfides in generation of acetic acid was shown. The Gibbs free energy values indicate that the acetic acid synthesis is unfavorable to proceed on the studied Fe-Ni-S model under simulated conditions. The importance of these results in terms of a primordial chemistry on iron-nickel sulfide surfaces is discussed.     

Comparison of source parameters estimated in the frequency and time domains for seismic events at the Rudna copper mine,Poland

Source parameters estimated in the frequency domain for 100 selected seismic events from the Rudna copper mine, with moment magnitude ranging from 1.4 to 3.6, were collected to study their scaling relations and to compare them with the parameters estimated in the time domain. The apparent stress and static stress drop, corrected for the limited bandwidth recording, increase slightly in a similar manner with increasing seismic moment. The ratio of apparent stress to static stress drop, a measure of radiation efficiency, is practically constant and its mean value is close to 0.1. For 37 seismic events, with moment magnitude between 1.9 and 3.4, source parameters were estimated in the time domain from relative source time functions, that displayed unilateral rupture propagation, and their rupture velocity could be estimated. It ranges from 0.23 to 0.80 of shear wave velocity and is almost independent of seismic moment. The fault length, estimated from the average source pulse width and rupture velocity, is clearly dependent on seismic moment and is smaller than the source radius estimated from the corner frequency on the average by about 25 percent. There is no correlation between the values of static stress drop estimated in the frequency and time domains, but the time domain stress drop is in general similar to that estimated in the frequency domain. The apparent stress increases with increasing rupture velocity, and the ratio of apparent stress to static stress drop seems also to depend on rupture velocity.     

Lithium isotope systematics of lavas from the Cook–Austral Islands: Constraints on the origin of HIMU mantle

Radiogenic isotope variations in lavas from the Cook–Austral volcanic chain have delineated three distinct mantle sources: a HIMU component, a depleted component (DM), and an enriched component (EM). To better constrain the mantle sources for South Pacific hot spot volcanism, we determined lithium isotopic compositions of lavas from Raivavae, Rapa, Mangaia and Tubuai of the volcanic chain. The study includes whole rock and mineral analyses. In general, δ⁷Li of most olivines resemble bulk rock composition whereas clinopyroxenes are variably lighter. This implies that clinopyroxene is more susceptible to diffusion-induced fractionation, in agreement with previous studies. Olivine δ⁷Li values span a narrower range than whole rock values, and do not extend to the very heavy compositions previously reported in HIMU bulk lavas. This discrepancy likely reflects alteration of bulk lavas, and suggests that Li-isotope analyses of bulk lavas should be interpreted with caution. Olivines from HIMU lavas have heavy δ⁷Li values (up to 6.2‰), and extend beyond the range reported for fresh MORB. Correlations between Li-isotopes and radiogenic isotopes suggest that the heavy δ⁷Li values in HIMU olivines are a source characteristic and not the result of post-magmatic alteration. Although the Li-isotope composition of recycled, dehydrated oceanic crust is currently under debate, our results suggest that HIMU lavas derive from a source containing recycled dehydrated oceanic crust, and that the “heavy” Li-isotope signature of altered oceanic crust is partially preserved during passage through the subduction factory.     

He and Ne isotopes in oceanic crust: implications for noble gas recycling in the mantle

In an attempt to determine the helium and neon isotopic composition of the lower oceanic crust, we report new noble gas measurements on 11 million year old gabbros from Ocean Drilling Program site 735B in the Indian Ocean. The nine whole rock samples analyzed came from 20 to 500 m depth below the seafloor. Helium contents vary from 3.3×10⁻¹⁰ to 2.5×10⁻⁷ ccSTP/g by crushing and from 5.4×10⁻⁸ to 2.4×10⁻⁷ ccSTP/g by melting. ³He/⁴He ratios vary between 2.2 and 8.6 Ra by crushing and between 2.9 and 8.2 by melting. The highest R/Ra ratios are similar to the mean mid-ocean ridge basalt (MORB) ratio of 8±1. The lower values are attributed to radiogenic helium from in situ α-particle production during uranium and thorium decay. Neon isotopic ratios are similar to atmospheric ratios, reflecting a significant seawater circulation in the upper 500 m of exposed crust at this site. MORB-like neon, with elevated ²⁰Ne/²²Ne and ²¹Ne/²²Ne ratios, was found in some high temperature steps of heating experiments, but with very small anomalies compared to air. These first results from the lower oceanic crust indicate that subducted lower oceanic crust has an atmospheric ²⁰Ne/²²Ne ratio. Most of this neon must be removed during the subduction process, if the ocean crust is to be recirculated in the upper mantle, otherwise this atmospheric neon will overwhelm the upper mantle neon budget. Similarly, the high (U+Th)/³He ratio of these crustal gabbros will generate very radiogenic ⁴He/³He ratios on a 100 Ma time scale, so lower oceanic crust cannot be recycled into either MORB or oceanic island basalt without some form of processing.     

Gamma Emitters on Micro-Becquerel Activity Level in Air at Kraków (Poland)

The Petryanov air filters combined into half-year sets were analyzed for the presence of ⁴⁰K, ¹³⁷Cs and ²²Na by means of low-background gamma rays spectrometry. Each sample contains aerosols from more than 1 Mm³ of air. Samples were collected in ground level air at Kraków (Southern Poland) from 1996 to 2002. Activity concentrations of ⁴⁰K are almost constant with the mean of 14.7± 4.5 Bq m^–3. Activity concentrations of ¹³⁷Cs, which are on the level of single Bq m^{– 3} show exponential decrease with effective half-life time of 7.07± 0.77 years. The cosmogenic ²²Na shows a strong seasonal variation with significant different mean values activity concentration between 0.333± 0.095 Bq m^–3 and 0.137± 0.045 Bq m^–3, for summer and winter, respectively. Moreover, the activity ratio for two cosmogenic radionuclides: ²²Na and measured previously ⁷Be show also changes with statistically significant seasonal differences. The lower values were found during winters. The mechanisms which might govern this ratio are discussed. The conclusion is that transport of ²²Na during summer seems to be so much effective, that results in kind of relative depletion of stratosphere of this nuclide.     

TraceeElements in Leccinum scabrum mushrooms and topsoils from Kłodzka Dale in Sudety Mountains, Poland

In the current study, we determined concentrations and transfer rates of Ag, Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, P, Rb, Sr and Zn to Brown Birch Scaber Stalks (Leccinum scabrum) mushrooms emerged in the area of Sudety Mountains (Sudetes) in Poland. Fruiting bodies and topsoil samples beneath L. scabrum were collected form the K odzka Dale. The trace elements were determined using validated method and inductively coupled plasma - atomic emission spectroscopy (ICP-AES) for final measurement. Mushrooms contained Ag, Cr, Hg, Co, Ni and Sr at < 1.0 μg/g dry weight; Ba and Pb at ~1.0 μg/g dw; Cd at < 5 μg/g dw; Cu and Mn at > 10 μg/g dw; Al and Ca at ~100 μg/g dw; Fe, Na, Rb and Zn at 100 to 500 μg/g dw, Mg at ~1,000 μg/g dw; P at ~5,000 μg/g dw and K at ~30,000 μg/g dw. Ca, Mn and Ni were nearly equally distributed between stipes and caps; stipes compared to caps were enriched in Ba, Na and Sr, while caps were enriched in Ag, Al, Cd, Co, Cr, Cu, Fe, K, P, Pb, Rb and Zn. The values of bioconcentration factor (BCF) varied highly depending on chemical element and were >1 for Ag, Cd, Cu, K, Mg, Na, P, Rb and Zn, while <1 for Al, Ba, Ca, Co, Cr, Fe, Mn, Ni, Pb and Sr. Topsoil showed elevated content of lead and mean concentration was 99 ± 32 μg/g dw, while cadmium was at 0.41 ± 0.15 and those two highly toxic to human elements occurred in edible caps of L. scabrum at 4.5 ± 2.2 and 2.9 ± 2.0 μg/g dw, respectively.     

Orbit calculations near by the equilibrium points by a discrete mechanics method

Basic formulas of discrete mechanics in a rotating frame of references are obtained. Its application to several computer examples of orbits near by the equilibrium points of the Earth-Moon system are presented, and—for computational purposes—an algorithm is given.     

Downward migration of Chernobyl-derived radionuclides in soils in Poland and Sweden

Vertical profiles of ¹³⁷Cs and ^239,240Pu were measured in soils collected from two sites in southern Sweden and three sites in southern Poland and were modeled using both a solute transport model and a bioturbation model to better understand their downward migration. A time series of measured ¹³⁷Cs profiles indicates that ¹³⁷Cs from Chernobyl was found at the soil surface in 1986 but it has migrated progressively downward into the soil 4.5-25.5 cm since. However, because of dispersion during the migration and mixing following Chernobyl deposition and the much higher activities of ¹³⁷Cs from Chernobyl, stratospheric fallout of ¹³⁷Cs from the 1960s cannot be identified as a second ¹³⁷Cs activity maximum lower in the soil column at any of the sites. Conversely, the ²⁴⁰Pu/²³⁹Pu ratio indicates that no Chernobyl-derived Pu is present in any of the cores with the exception of one sample in Sweden. This difference may be attributed to the nature of the release from Chernobyl. Cesium volatilized at the reactor temperature during the accident, and was released as a vapor whereas Pu was not volatile and was only released in the form of minute fuel particles that traveled regionally. Both the solute diffusion and the bioturbation models accurately simulate the downward migration of the radionuclides at some sites but poorly describe the distributions at other sites. The distribution coefficients required by the solute transport model are about 100 times lower than reported values from the literature indicating that even though the solute transport model can simulate the profile shapes, transport as a solute is not the primary mechanism governing the downward migration of either Cs or Pu. The bioturbation model uses reported values from the literature of the distribution coefficients and can simulate the downward migration because that model buries the fallout by placing soil from depth on top and mixing it slightly throughout the mixing zone (0.6-2% per year of mixing). However, mixing in that model predicts concentrations in the top parts of the soil profiles which are too high in many cases. Future progress at understanding the downward migration of radionuclides and other tracers will require a more comprehensive approach, combining solute transport with bioturbation and including other important soil processes.