Longitudinal ultrasonic waves in DC electric field

The results of experimental studies of the propagation of longitudinal waves in saturated rock samples in which there is a flow of electric charges are presented. It is shown that the electric field affects elastic parameters in heterophase media by changing their dynamic characteristics. The aim of the study of the effect of electric field on the propagation of elastic waves in saturated porous media was to determine the optimum conditions for this effect, and to construct a set of effective parameters which could be used to increase the effectiveness of seismoacoustic prospecting methods, particularly acoustic logging, and be helpful for developing new methods of increasing the effectiveness of oil extraction from productive wells.     

Effects of climatic changes on anisakid nematodes in polar regions

Anisakid nematodes are common in Antarctic, sub-Antarctic, and Arctic areas. Current distributional knowledge of anisakids in the polar regions is reviewed. Climatic variables influence the occurrence and abundance of anisakids, directly influencing their free-living larval stages and also indirectly influencing their predominantly invertebrate (but also vertebrate) hosts. As these parasites can also be pathogenic for humans, the paucity of information available is a source of additional hazard. As fish are a major human dietary component in Arctic and Antarctic areas, and are often eaten without heat processing, a high risk of infection by anisakid larvae might be expected. The present level of knowledge, particularly relating to anisakid larval stages present in fishes, is far from satisfactory. Preliminary molecular studies have revealed the presence of species complexes. Contemporary climate warming is modifying the marine environment and may result in an extension of time during which anisakid eggs can persist and hatch, and of the time period during which newly hatched larvae remain viable. As a result there may be an increase in the extent of anisakid distribution. Continued warming will modify the composition of the parasitic nematode fauna of marine animals, due to changes in feeding habits, as the warming of the sea and any localised reduction in salinity (from freshwater runoff) can be expected to bring about changes in the species composition of pelagic and benthic invertebrates.     

Erythemal UV observations at Belsk,Poland, in the period 1976–2008: Data homogenization,climatology, and trends

Measurements of erythemal irradiance have been carried out continuously at Belsk since May 1975. We present a homogenization procedure of the UV time series for the period of 1976–2008. Long-term oscillations discovered in the homogenized data set agree with those extracted from the reconstructed UV data for all-sky and clear-sky conditions. The UV climatology was established and the UV variability was determined. Positive UV trends were found for the period of 1976-2008 in the annual mean (5.6±0.9% per decade), in the seasonal mean for the warm subperiod of the year (April–October, 5.5±1.0% per decade), and in monthly means (∼2–9% per decade). A satisfactory agreement between the trend extracted from the homogenized ground-based data and that found in satellite UV data for Belsk (1979–2008) supports the reliability of satellite trend analyses over wider areas during snowless periods.     

Chosen aspects of sustainable development on the Polish, Czech and German borderland

The shift to market forces in Poland, East Germany and Czech Republic has fundamentally reconfigured its economic geography. In particular, spatial inequalities between neighboring Polish, Czech and German border regions have re-emerged forcefully in response to new values, expectations and preferences. In this paper the example of coal mines illustrates the potency of spatial planning. The abundance of coal mines in the Polish, Czech and German borderland at or near abandonment and their proximity to ecological corridors make them candidates for renewed uses in industry or conservation. Attention will also be given to the main environmental problems caused by wrongly conducted spatial policy on this borderland. Transforming a landscape requires continuation of guidance and financial assistance of the European Union.     

Saline groundwater seepage zones and their impact on soil and water resources in the Spicers Creek catchment,central west,New South Wales,Australia

Saline seepage zone development and hence dryland salinity is a major environmental problem which many arid to semiarid landscapes in Australia are experiencing. Due to the geological complexity of the regional aquifer system and the heterogeneous nature of the local groundwater system, each groundwater seepage zone in the Spicers Creek catchment, central west, New South Wales, Australia possesses different mechanisms which control its development. Saline seepage zones have formed adjacent to a fault zone, and two experimental sites were established through these groundwater discharge zones to understand geochemical processes which have led to the development of soil sodicity, gully erosion and the flushing of salts into the surface water systems. Seepage zone groundwaters contain a distinctive geochemical signature with elevated concentrations of Na, Cl, HCO₃, Ca, Sr, B, As and Li. The mixing of deep saline groundwaters together with ion exchange processes lead to a distinctive seepage zone groundwater chemistry being developed. Altering the landscape features within this rural groundwater system has developed water toxicity for crops, soil sodicity leading to land degradation, and waterlogging problems.     

A Simplified, Accurate and Fast Method for Lithium Isotope Analysis of Rocks and Fluids, and δ7Li Values of Seawater and Rock Reference Materials

We report a new approach to conduct fast and accurate lithium isotope ratio measurements by MC-ICP mass spectrometry after wet chemical sample preparation. In contrast to most previously published methods our MC-ICP-MS set-up did not use a desolvating system to achieve appropriate ion beam intensities and, therefore, was less affected by matrix-induced shifts of the instrumental mass bias. As the total lithium background and build-up in the sample introduction system was low, previous sample residues could be washed out by an extended uptake of the new sample. Elimination of a nitric acid rinse step increased the sample throughput by a factor of two and allowed the instrumental mass bias drift to be tracked more precisely. δ⁷Li values of powdered silicate rock reference materials and seawater obtained in this study revealed good accuracy and an overall analytical uncertainty of typically 0.5‰ (2s). On the basis of a comparison between our lithium isotope data and compiled literature data, we recommend preliminary average δ⁷Li values for seawater (+30.8‰) and several silicate rock reference materials (BHVO-1: +5.0‰; JA-1: +5.6‰; JB-2: +4.8‰). The compilation of published δ⁷Li values for seawater suggests that the observed large lithium isotope differences are due to inter-method and/or interlaboratory bias. Most recently published δ⁷Li values for seawater show little variation and confirm a constant lithium isotope composition (at the sub ‰ level) of seawater in well mixed ocean basins.     

Slope processes in the High Arctic: a 30‐year‐long record from Spitsbergen

Ten monitoring sites were established in 1986 near the Scottbreen and Renardbreen glaciers (Bellsund, Spitsbergen) in order to determine the rates of gelifluction on raised marine terraces and on talus cones, accumulation on talus cones, and movement of the protalus rampart. The measurements were performed in 1987, 2007 and 2016. The results obtained revealed a very slow rate of changes on the surface of the analysed area. During 30 years, only one out of 84 points where the gelifluction rate was measured was displaced by 15 cm down‐slope. The maximal annual and average gelifluction rates were calculated at 0.5 cm and 0.18 cm a^?1, respectively. Several measurement points did not change their position over the observation period. As shown by the observations, the gelifluction rate largely does not depend on slope inclination. Studies of talus cones allowed the level of cone increment to be determined as 314.3 kg of scree per square metre. Analysis of factors influencing the rate of mass movement allowed for correlation of the small‐scale gelifluction movement at the analysed sites with the general trends of climate warming. In this part of the Arctic, these trends are manifested by soil desiccation. It appears that slope processes depend on very local topoclimatic factors. Analysis of the obtained data with regard to palaeogeographical and climatic investigations suggests that the ice segregation forms on raised marine terraces developed during the last Holocene cooling, i.e. the Little Ice Age.     

Ionic surfactants adsorption on heterogeneous surfacesAdsorption de tensioactifs ioniques sur les surfaces hétérogènes

The adsorption of surfactants from aqueous solution is a phenomenon of major importance in applications ranging from ore flotation and paint technology to enhanced oil recovery. As this paper will illustrate, the process is very complex and of high scientific interest; its results can be extended to the retention of organic compounds (humic and fulvic acids, pollutants...) on solids in the biosphere. For a good understanding of the mechanisms involved in surfactants adsorption at the hydrophilic solid–aqueous solution interface, thermodynamic models have to take into account: (i) the physical chemistry of the surfactant in aqueous solution for choosing the appropriate reference phase, (ii) the surface heterogeneity of the adsorbing solid, (iii) the intensity of normal adsorbate–adsorbent bonds responsible for adsorption, (iv) the intensity of lateral bonds that favour the formation of surface aggregates through cooperative process and finally, (v) suitable theoretical models to describe adsorption phenomena. Once this has been achieved, two systems can be discussed: systems characterised by strong normal adsorbate–adsorbent bonds, currently used in ore flotation, which lead, in the case of heterogeneous surfaces, to the formation of lamellar aggregates at monolayer concentration and bilayer formation for higher concentrations. Systems characterised by weak normal adsorbate–adsorbent bonds, currently used in enhanced oil recovery and hydrocarbon (bio)remediation, which correspond to: (i) formation of globular micelles at the solid surface near the CMC when the temperature is higher than the Krafft point, (ii) formation of bilayered lamellar aggregates in the opposite case, (iii) three-dimensional condensation on substrate (T<T_Krafft) if the ionic surfactant interacts with cations in the bulk. To cite this article: J.-M. Cases et al., C. R. Geoscience 334 (2002) 675–688.     

Investigation of X-Ray Flares with Long Rising Phases

We have used Yohkoh and GOES X-ray observations to investigate flares with a long rising phase. We have found that a characteristic feature of such flares is a long time interval, Δ t ≥ 20 min, between the temperature maximum and the maximum of the emission measure. We have carried out detailed analysis for 10 limb flares of this type. Time variation of the heating function, E_H(t), has been determined for their loop-top X-ray kernels. The time variation of E_H(t), together with the temperature–density diagnostic diagrams, have been used to explain the large value of the time interval, Δ t. The main point is that for these flares the heating function E_H(t) decreases so slowly after the temperature maximum, that for the long time, Δ t, the energy flux reaching flare foot points is sufficient to maintain significant chromospheric evaporation. Investigation of the flare evolution in the temperature–density diagnostic diagrams allowed us to work out a new method of determination of the density for flare kernels. This method can be applied to all the kernels for which their altitudes can be estimated. The advantage of this method is that for the density determination it is not necessary to assume what is the extension of the emitting plasma along the line of sight.