Modelling the Mont Terri HE-D experiment for the Thermal–Hydraulic–Mechanical response of a bedded argillaceous formation to heating

Coupled thermal–hydrological–mechanical (THM) processes in the near field of deep geological repositories can influence several safety features of the engineered and geological barriers. Among those features are: the possibility of damage in the host rock, the time for re-saturation of the bentonite, and the perturbations in the hydraulic regime in both the rock and engineered seals. Within the international cooperative code-validation project DECOVALEX-2015, eight research teams developed models to simulate an in situ heater experiment, called HE-D, in Opalinus Clay at the Mont Terri Underground Research Laboratory in Switzerland. The models were developed from the theory of poroelasticity in order to simulate the coupled THM processes that prevailed during the experiment and thereby to characterize the in situ THM properties of Opalinus Clay. The modelling results for the evolution of temperature, pore water pressure, and deformation at different points are consistent among the research teams and compare favourably with the experimental data in terms of trends and absolute values. The models were able to reproduce the main physical processes of the experiment. In particular, most teams simulated temperature and thermally induced pore water pressure well, including spatial variations caused by inherent anisotropy due to bedding.     

Determination of the convective boundary-layer height with laser remote sensing

Different methods to determine the height of the convective boundary layer from lidar measurements are described and compared. The differences in either aerosol backscatter or in humidity between the boundary layer and the free troposphere are used, and either the variance or the gradient profile of the parameter under study is evaluated. On average the different methods are in very good agreement. Temporal resolution of the gradient methods is very high, on the order of seconds, but often there is an ambiguity in the choice of the “relevant” minimum in the gradient that corresponds to the boundary-layer height. This is avoided by combining the variance and the gradient methods, using the result of the variance analysis as an indicator for the region where the minimum of the gradient is sought. The combined method is useful for automated determination of the boundary-layer height at least under convective conditions. Aerosol backscatter is found to be as good an indicator for boundary-layer air as humidity, so a relatively simple backscatter lidar is sufficient for determination of the boundary-layer height.     

Mineral paragenesis of the Kalahari managanese field, South Africa

The mineralogy of the managanese ores of the giant Paleoproterozoic Kalahari manganese deposit of the Transvaal Supergroup has been subject of many studies and up to now 135 different ore and gangue minerals have been described, of which eight represent new mineral species. Through correlation of different mineral assemblages with specific geological events and by determining relative ages of minerals in outcrop, hand specimen and under the microscope an attempt is made in this publication to construct a paragenetic sequence for this complex mineral assemblage. Sedimentation and early diagenesis of the Hotazel Formation, composed of interbedded iron formation and braunite lutite, was followed by low-grade metamorphism and associated stratabound metasomatism. Braunite lutite of sedimentary origin, comprising 97% of the total ore reserve, is composed of braunite, hematite and kutnahorite, and abundant early diagenetic kutnahorite and manganoan calcite forming laminae and ovoids. Fluid flow during late diagenesis or lower greenschist facies metamorphism led to stratabound metasomatic oxidation of Mn-bearing carbonates to hausmannite and Mn-poor calcite. Three structurally controlled hydrothermal alteration events succeed metamorphism. These events are referred to as Wessels, Mamatwan and Smartt events. The Wessels alteration event is the oldest of the three events and it is of great economic importance because virtually all of the high-grade ore (> 42% Mn), 3% of the total ore reserve, formed during this event through alteration of carbonate-rich low-grade Mamatwan-type ore (braunite lutite) to high-grade, carbonate-poor Wessels-type manganese ore. This Wessels hydrothermal alteration event took place in the northwestern part of the Kalahari deposit, associated with a system of major north-south- and minor east-west-striking normal faults. The Mamatwan alteration event is observed throughout the Kalahari manganese deposit but alteration is very localized. Reduction halos and discolouration of braunite lutite around fracture or joint-hosted sulphide-carbonate mineralization are typical of the Mamatwan alteration event. In contrast, the Smartt alteration event is characterized by oxidation of braunite lutite and the formation of todorokite and manganomelane. Syn- and Post-Kalahari supergene alteration has taken place below the suboutcrop of the Hotazel Formation against the calcretized sediments of the Cenozoic Kalahari Formation. Cryptomelane and pyrolusite are the predominant products of surficial weathering.     

Hydrothermally induced diagenesis: Evidence from shallow marine-deltaic sediments,Wilhelmøya,Svalbard

Sedimentary basins containing igneous intrusions within sedimentary reservoir units represent an important risk in petroleum exploration. The Upper Triassic to Lower Jurassic sediments at Wilhelm?ya(Svalbard) contains reservoir heterogeneity as a result of sill emplacement and represent a unique case study to better understand the effect of magmatic intrusions on the general burial diagenesis of siliciclastic sediments. Sills develop contact metamorphic aureoles by conduction as presented in many earlier studies. However, there is significant impact of localized hydrothermal circulation systems affecting reservoir sediments at considerable distance from the sill intrusions. Dolerite sill intrusions in the studied area are of limited vertical extent(～12 m thick), but created localized hydrothermal convection cells affecting sediments at considerable distance(more than five times the thickness of the sill)from the intrusions. We present evidence that the sedimentary sequence can be divided into two units:(1) the bulk poorly lithified sediment with a maximum burial temperature much lower than 60-70 ℃,and(2) thinner intervals outside the contact zone that have experienced hydrothermal temperatures(around 140 ℃). The main diagenetic alteration associated with normal burial diagenesis is minor mechanical plastic deformation of ductile grains such as mica. Mineral grain contacts show no evidence of pressure dissolution and the vitrinite reflectance suggests a maximum temperature of ～40 ℃. Contrary to this, part of the sediment, preferentially along calcite cemented flow baffles, show evidence of hydrothermal alteration. These hydrothermally altered sediment sections are characterized by recrystallized carbonate cemented intervals. Further, the hydrothermal solutions have resulted in localized sericitization(illitization) of feldspars, albitization of both K-feldspar and plagioclase and the formation of fibrous illite nucleated on kaolinite. These observations suggest hydrothermal alteration at T 120-140 ℃ at distances considerably further away than expected from sill heat dissipation by conduction only, which commonly affect sediments about twice the thickness of the sill intrusion. We propose that carbonate-cemented sections acted as flow baffles already during the hydrothermal fluid mobility and controlled the migration pathways of the buoyant hot fluids. Significant hydrothermally induced diagenetic alterations affecting the porosity and hence reservoir quality was not noted in the noncarbonate-cemented reservoir intervals.