An investigation of tuned liquid dampers equipped with damping screens under 2D excitation

This paper reports on the results of a study conducted on tanks partially filled with water, representing tuned liquid dampers (TLD), subjected to both 1D and 2D horizontal excitations. The sloshing response of the water in the tank is characterized by the free surface motion, the resulting base shear force, and evaluation of the energy dissipated by the sloshing water. A 1D non‐linear flow model capable of simulating a TLD equipped with damping screens is employed to model a 2D TLD. Application of this particular model requires the assumption that the response is decoupled and can be treated as the summation of two independent 1D TLDs. Results from the non‐linear flow model are compared with the 2D experimental shake table test results leading to a validation of the decoupled response assumption. This attractive decoupled response property allows square and rectangular tanks to be used as 2D TLDs, which can simultaneously reduce the dynamic response of a structure in two perpendicular modes of vibration. Copyright © 2005 John Wiley & Sons, Ltd.     

Palaeomagnetic data from Ediacaran (Vendian) sediments of the Arkhangelsk region, NW Russia: An alternative apparent polar wander path of Baltica for the Late Proterozoic–Early Palaeozoic

The study area is situated along the Zolotica river in NW Russia, located within the Kola–Dvyna Rift System in the Baltic Shield that developed during Meso and Neoproterozoic times. A 9-m thick section made up of shallow marine sediments of Upper Ediacaran age was sampled in this locality. Two volcaniclastic levels from the middle part of the section yielded an age of 556 Ma. (U/Pb SHRIMP-II on zircons). Two magnetic components were successfully isolated, component A (Decl = 157.1, Incl = 68.0, ₉₅ = 1.9°, N = 575 in situ) carried by magnetite and component B (Decl = 120.3, Incl = − 31.7, ₉₅ = 3.9°, N = 57, bedding corrected), carried by haematite. While component A is thought to represent a younger overprint direction, the in situ direction for component B on the other hand, is dissimilar to any expected younger direction and is considered to be primary magnetisation in origin, acquired during or soon after deposition of the sediments in the Late Ediacaran. The corresponding palaeomagnetic pole for component A in situ is located at Lon = 55.4°E, Lat = 31°N, A₉₅ = 2.7° and for component B at Lon = 110°E, Lat = 28.3°S, A₉₅ = 3.8°, N = 57. Combined with other palaeomagnetic poles of the same tectonostratigraphic unit an alternative apparent polar wander path for the Late Proterozoic–Early Palaeozoic of Baltica is proposed. Such an alternative path shows that after the mid Cryogenian (750 Ma), the poles that were situated over South Africa (p.d.c.) moved to the east until they reached Australia during the Late Ediacaran (555 Ma) where they remained approximately stationary until the beginning of the Cambrian (545 Ma). Finally, they moved to the northwest until they reached the Arabian Peninsula in the Early Ordovician. Palaeolatitudes indicate that Baltica situated near the equator from the Cryogenian through to the Ediacaran moving gradually to the south at c. 1 cm/yr. During the Late Early Ediacaran, the plate suddenly began to drift northward at c. 8 cm/yr and in the boundary with the Cambrian it was positioned in low to intermediate latitudes. Finally, Baltica began to move back to the south at c. 13 cm/yr until in the Early Ordovician, reaching intermediate to high southern latitudes.     

Geodynamic evolution of the European Variscan fold belt: palaeomagnetic and geological constraints

The Variscan fold belt of Europe resulted from the collision of Africa, Baltica, Laurentia and the intervening microplates in early Paleozoic times. Over the past few years, many geological, palaeobiogeographic and palaeomagnetic studies have led to significant improvements in our understanding of this orogenic belt. Whereas it is now fairly well established that Avalonia drifted from the northern margin of Gondwana in Early Ordovician times and collided with Baltica in the late Ordovician/early Silurian, the nature of the Gondwana derived Armorican microplate is more enigmatic. Geological and new palaeomagnetic data suggest Armorica comprises an assemblage of terranes or microblocks. Palaeobiogeographic data indicate that these terranes had similar drift histories, and the Rheic Ocean separating Avalonia from the Armorican Terrane Assemblage closed in late Silurian/early Devonian times. An early to mid Devonian phase of extensional tectonics along this suture zone resulted in formation of the relatively narrow Rhenohercynian basin which closed progressively between the late Devonian and early Carboniferous. In this contribution, we review the constraints provided by palaeomagnetic data, compare these with geological and palaeobiogeographic evidence, and present a sequence of palaeogeographic reconstructions for these circum-Atlantic plates and microplates from Ordovician through to Devonian times.     

XVIIIth International Congress of Photogrammetry and Remote Sensing

The XVIIIth International Congress of Photogrammetry and Remote Sensing was held in the Austria Center, Vienna from 9th to 19th July, 1996. Reports on the Technical Commission Activities, on the Congress Exhibition and on the General Assembly were given at a meeting of the Photogrammetric Society on 7th October, 1996. Papers from the Congress were published in the International Archives of Photogrammetry and Remote Sensing, 31.     

Building a Coastal GIS Using Digital Photogrammetry

This paper examines the recent emergence of integrated coastal zone management as an application for the gathering, management and distribution of geospatial data. The requirements of a geospatial database of the coastal zone are outlined and the contribution of digital photogrammetry is examined. A saltmarsh monitoring project, which uses digital photogrammetry and was initiated by the authors, is described     

The Early Palaeozoic Break-up of Northern Gondwana: Sedimentology, Physical Volcanology and Geochemistry of a Submarine Volcanic Complex in the Bavarian Facies Association, Saxothuringian Basin, Germany

Ordovician volcano-sedimentary successions of the Bavarian facies association in the Saxothuringian basin record the continental rift phase of the separation of the Saxothuringian Terrane from Gondwana. An 80 m succession from the Vogtendorf beds and Randschiefer Series (Arenig-Middle Ordovician), exposed along the northern margin of the Münchberg Gneiss Massif in northeast Bavaria, were subjected to a study of their sedimentology, physical volcanology and geochemistry. The Randschiefer series previously has been interpreted as lavas, tuffs, sandstones and turbidites, but the studied Ordovician units include four main lithological associations: mature sandstones and slates, pillowed alkali-basalts and derivative mass flow deposits, trachyandesitic lavas and submarine pyroclastic flow deposits interbedded with turbidites. Eight lithofacies have been distinguished based on relict sedimentary structures and textures, which indicate deposition on a continental shelf below wave base. The explosive phase that generated the pyroclastic succession was associated with the intrusion of dykes and sills, and was succeeded by the eruption of pillowed basalts. Debris flow deposits overlie the basalts. Ordovician volcanism in this region, therefore, alternated between effusive and explosive phases of submarine intermediate to mafic volcanism.

Based on geochemical data, the volcanic and pyroclastic rocks are classified as basalts and trachyandesites. According to their geochemical characteristics, especially to their variable concentrations of incompatible elements such as the High Field Strength Elements (HFSE), they can be divided into three groups. Group I, which is formed by massive lavas at the base of the succession, has extraordinarily high contents of HFSE. The magmas of this group were probably derived from a mantle source in the garnet stability field by low (ca. 1%) degrees of partial melting and subsequent fractionation. Group II, which comprises the pillow lavas at the top of the sequence, displays moderate enrichment of HFSE. This can be explained by a slightly higher degree of melting (ca. 1.6%) for the primary magma. Group I and II melts fractionated from their parental magmas in different magma chambers. The eruption centres of Groups I and II, therefore, cannot be the same, and the volcanic rocks must have originated from different vents. The sills and pyroclastic flow deposits of Group III stem at least partly from the same source as Group I. Rocks of Group I most likely mixed together with Group II components during the formation of the Group III flows, which became hybridised during eruption, transportation and emplacement.

The sedimentological and geochemical data best support a rift as the tectonic setting of this volcanism, analogous to modern continental rift zones. Hence, the rift-associated volcanic activity preserved in the Vogtendorf beds and Randschiefer Series represents an early Ordovician stage of rift volcanism when the separation of the Saxothuringian Terrane from Gondwana had just commenced.     

A Finite-Volume Method with Hexahedral Multiblock Grids for Modeling Flow in Porous Media

This paper presents a finite-volume method for hexahedral multiblock grids to calculate multiphase flow in geologically complex reservoirs. Accommodating complex geologic and geometric features in a reservoir model (e.g., faults) entails non-orthogonal and/or unstructured grids in place of conventional (globally structured) Cartesian grids. To obtain flexibility in gridding as well as efficient flow computation, we use hexahedral multiblock grids. These grids are locally structured, but globally unstructured. One major advantage of these grids over fully unstructured tetrahedral grids is that most numerical methods developed for structured grids can be directly used for dealing with the local problems. We present several challenging examples, generated via a commercially available tool, that demonstrate the capabilities of hexahedral multiblock gridding. Grid quality is discussed in terms of uniformity and orthogonality. The presence of non-orthogonal grid and full permeability tensors requires the use of multi-point discretization methods. A flux-continuous finite-difference (FCFD) scheme, previously developed for stratigraphic hexahedral grid with full-tensor permeability, is employed for numerical flow computation. We extend the FCFD scheme to handle exceptional configurations (i.e. three- or five-cell connections as opposed to the regular four), which result from employing multiblock gridding of certain complex objects. In order to perform flow simulation efficiently, we employ a two-level preconditioner for solving the linear equations that results from the wide stencil of the FCFD scheme. The individual block, composed of cells that form a structured grid, serves as the local level; the higher level operates on the global block configuration (i.e. unstructured component). The implementation uses an efficient data structure where each block is wrapped with a layer of neighboring cells. We also examine splitting techniques [14] for the linear systems associated with the wide stencils of our FCFD operator. We present three numerical examples that demonstrate the method: (1) a pinchout, (2) a faulted reservoir model with internal surfaces and (3) a real reservoir model with multiple faults and internal surfaces.     

Automated placement of supplementary contour lines

Supplementary contour lines are placed between regular contour lines to visualize small but important forms that regular contour lines are unable to show. On topographic maps, typical forms are hillcrests, depressions, saddles, terraces, banks, and levees. No automated method for the selection of supplementary contour lines has been described so far. We document cartographic design principles for the selection of supplementary contour lines for topographic maps, and present an automated method for their placement. Results of the automated method are similar to manually placed supplementary contour lines. Our method helps map authors to create contour line maps that more effectively illustrate relevant small details in maps showing terrain elevation or other scalar fields.