A Raman spectroscopic study on the structural disorder of monazite–(Ce)

This study addresses whether Raman spectra can be used to estimate the degree of accumulated radiation damage in monazite-(Ce) samples whose chemical composition was previously determined. Our results indicate that the degree of disorder in monazite–(Ce), as observed from increasing Raman band broadening, generally depends on both the structural state (i.e., radiation damage) and the chemical composition (i.e., incorporation of non-formula elements). The chemical effects were studied on synthetic orthophosphates grown using the Li-Mo flux method, and non radiation-damaged analogues of the naturally radiation-damaged monazite–(Ce) samples, produced by dry annealing. We found that the “chemical” Raman-band broadening of natural monazite–(Ce) can be predicted by the empirical formula, $$ {\hbox{FWHM}} {\hbox{[c}}{{\hbox{m}}^{ - {1}}}{]} = {3}{.95} + {26}{.66} \times {\hbox{(Th}} + {\hbox{U}} + {\hbox{Ca}} + {\hbox{Pb)}} {\hbox{[apfu]}} $$ where, FWHM = full width at half maximum of the main Raman band of monazite–(Ce) (i.e., the symmetric PO₄ stretching near 970?cm^?1), and (Th+U+Ca+Pb) = sum of the four elements in apfu (atoms per formula unit). Provided the chemical composition of a natural monazite–(Ce) is known, this “chemical band broadening” can be used to estimate the degree of structural radiation damage from the observed FWHM of the ν₁(PO₄) band of that particular sample using Raman spectroscopy. Our annealing studies on a wide range of monazite–(Ce) reference materials and other monazite–(Ce) samples confirmed that this mineral virtually never becomes highly radiation damaged. Potential advantages and the practical use of the proposed method in the Earth sciences are discussed.     

Ore belts of the Greater Altai and their ore resource potential

The results of comprehensive geological and metallogenic studies of the Greater Altai are presented. This project has been carried out since 1997 under the guidance of Academician G.N. Shcherba. The importance of these investigations is determined by the need to enhance and further develop mineral resources of nonferrous, noble, rare, and other metals for operating mining and metallurgical enterprises of Kazakhstan. The great body of information on the geology, geophysics, and metallogeny of the region obtained over many years has been integrated on the basis of new global tectonics. The Greater Altai embraces the Hercynides of the Rudny Altai, Qalba-Narym, West Qalba, Zharma-Saur, and the adjacent territories of Russia and China. The present-day tectonic units are considered to be detached blocks of ancient continental massifs that drifted in the Paleoasian ocean and then amalgamated into the structure of the Greater Altai during the Hercynian collision. The tectonic and metallogenic demarcation of the studied territory made possible the recognition of the Rudny Altai, Qalba-Narym, West Qalba, and Zharma-Saur ore belts, different in geology, geodynamic evolution, and metallogeny. The formation conditions and localization of volcanic-hosted massive sulfide, gold, and rare-metal deposits pertaining to certain ore-bearing geochronological levels were specified, and the potential of the region for various mineral resources was estimated.     

Melanterite and szomolnokite as weathering products of pyrite from the Bazhenovo Formation

Weathering of pyrite in the core recovered from black shales of the Bazhenovo Formation (Upper Jurassic-Lower Cretaceous) in the West Siberian marine basin promoted the successive formation of melanterite (FeSO₄ · 7H₂O) and szomolnokite (FeSO₄ · H₂O). Szomolnokite was detected in West Siberia for the first time.     

Geophysical investigation using resistivity and GPR methods: a case study of a lubricant oil waste disposal area in the city of Ribeirão Preto,São Paulo,Brazil

Geophysics has been shown to be effective in identifying areas contaminated by waste disposal, contributing to the greater efficiency of soundings programs and the installation of monitoring wells. In the study area, four trenches were constructed with a total volume of about 25,000 m³. They were almost totally filled with re-refined lubricating oil waste for approximately 25 years. No protection liners were used in the bottoms and laterals of the disposal trenches. The purpose of this work is to evaluate the potential of the resistivity and ground penetrating radar (GPR) methods in characterizing the contamination of this lubricant oil waste disposal area in Ribeirão Preto, SP, situated on the geological domain of the basalt spills of the Serra Geral Formation and the sandstones of the Botucatu Formation. Geophysical results were shown in 2D profiles. The geophysical methods used enabled the identification of geophysical anomalies, which characterized the contamination produced by the trenches filled with lubricant oil waste. Conductive anomalies (smaller than 185 Ωm) immediately below the trenches suggest the action of bacteria in the hydrocarbons, as has been observed in several sites contaminated by hydrocarbons in previously reported cases in the literature. It was also possible to define the geometry of the trenches, as evidenced by the GPR method. Direct sampling (chemical analysis of the soil and the water in the monitoring well) confirmed the contamination. In the soil analysis, low concentrations of several polycyclic aromatic hydrocarbons (PAHs) were found, mainly naphthalene and phenanthrene. In the water samples, an analysis verified contamination of the groundwater by lead (Pb). The geophysical methods used in the investigation provided an excellent tool for environmental characterization in this study of a lubricant oil waste disposal area, and could be applied in the study of similar areas.     

Composition and formation conditions of pay zones in the lower Cretaceous Nizhnyaya Kheta and Yakovlevo formations within the Vankor oil-and-gas field (in the Northeast of West Siberia)

Sedimentologic analysis of cores from wells sunk in the Vankor petroleum field allowed refinement of the accumulation conditions producing the sandy strata of the Nizhnyaya Kheta River (Nizhnekhetsky) Formation accumulated in the coastal marine zone and of the Yakovlevo (Yakovlevsky) Formation accumulated under alluvial-deltaic conditions. Petrographic examination of the sandstones added information on the sources, transport, and accumulation conditions of the terrigenous material in the northeastern marginal part of the West Siberian sedimentation basin.     

Surface changes on crystalline stones due to salt crystallisation

This study assesses the changes on the surface of crystalline stones due to salt crystallisation. Efflorescence was forced to grow on the surface of granite and marbles through 60 cycles of salt crystallisation with sodium sulphate. Changes on surface roughness, gloss and colour were measured every 15 cycles and the specimens were examined with naked eye and SEM. Sodium sulphate produces damage which depends on mineral composition. Results show that granites experience a mechanical decay with an increase in roughness. Peaks of mica can be observed on the surface and cracks widen and grow deeper. Colour and gloss do not show any significant change, although gloss decreases with an increase in surface roughness. In marbles, the decay is mainly chemical. Surface roughness increases due to dissolution of the calcite. White marbles exhibit yellowing. Gloss decreases during the first cycles—as grain boundaries become more visible—but tends to regain almost its initial value as the number of cycles increases. In this case, gloss does not show any relation with surface roughness.     

Fault-line uplifts in the Northeastern Pacific

The nearly latitudinal giant fracture zones in the northeastern Pacific Ocean are accompanied by narrow fault-line uplifts making up tectonic couples that strike for thousands of kilometers. They are especially distinctly expressed in the gravity map of the World Ocean [7]. As is shown in the paper, a compensation mechanism of deep mass displacement operates in the uplift-deepwater trench system. The uplifts have similar asymmetric structures, which reflects the long-term unidirectional effect of the deep geodynamic stress. In my opinion, the system of the fault-line uplifts began to form at the Cretaceous-Cenozoic boundary.     

Decompression and H<Subscript>2</Subscript>O exsolution driven crystallization and fractionation: development of a new model for low-pressure fractional crystallization in calc-alkaline magmatic systems

Magma ascent, decompression-induced H₂O exsolution and crystallization is now recognized as an important process in hydrous subduction zone magmas. During the course of such a process calculations suggest that the ascent rate of a degassing and crystallizing mafic magma will be greater than crystal settling velocities. Thus, any crystals formed as a consequence of volatile exsolution will remain suspended in the magma. If the magma erupts before the percentage of suspended crystals reaches the critical crystallinity value for mafic magma (~55 vol.%) it will produce the commonly observed crystal rich island arc basalt lava. If the magma reaches its critical crystallinity before it erupts then it will stall within the crust. Extension of compaction experiments on a 55 vol.% sand-Karo syrup suspension at different temperatures (and liquid viscosities) to the likely viscosities of interstitial andesitic to dacitic liquid within such a stalled magma suggest that small amounts (up to ~10%) can be expelled on a time scale of 1–10 years. The expelled liquid can create a new intermediate to silicic body of magma that is related to the original mafic magma via fractional crystallization. The short time scale for liquid expulsion indicate that decompression-induced H₂O exsolution and crystallization can be an important mechanism for fractional crystallization. Based on this assumption a general model of decompression-induced crystallization and fractionation is proposed that explains many of the compositional, mineralogical and textural features of Aleutian (and other andesites).