An experimental design for laboratory simulation of periglacial solifluction processes

An experimental slope of gradient 12° was constructed, comprising two 5 m × 2 m × 0·3 m contiguous strips of natural soils. Soil freezing and thawing took place from the surface downwards in an open hydraulic system, water being supplied at the base of each soil. Thermal conditions, porewater pressures and soil displacements were monitored using a PC-based logging system, with readings taken at half-hourly intervals. Soil surface displacements due to frost heave and solifluction were measured using linear voltage displacement transducers. Soil temperatures were determined using thermistors and semiconductor temperature sensors. Antifreeze-filled miniature ceramic-tipped pressure transducers were used to determine porewater pressure variations. The potential of this experimental approach for precise monitoring of mass movement processes associated with thawing of ice-rich soils is demonstrated.     

Oxygen and carbon isotope composition of structural carbonate in weathering apatites from laterites, southern Brazil and western Senegal

The oxygen (δ¹⁸O_c) and carbon (δ¹³C_c) isotope compositions of the structural carbonate group (CO₃) in apatites from lateritic profiles were investigated. The weathering profiles, located in southern Brazil and in western Senegal, are developed on three different types of apatite-rich parent rock: carbonatite, metamorphosed marine phosphorite and sedimentary marine phosphorite. The parent rock apatites are of magmatic, hydrothermal, metamorphic and sedimentary origins. The in situ formation of apatite of weathering origin in the profiles is well documented petrographically and geochemically.The overall range of measured δ¹⁸O_c and δ¹³C_c values of apatites of weathering origin (22 to 27 SMOW for δ¹⁸O_c and −15 to −10 PDB for δ¹³C_c) is much smaller than the range of measured and/or published isotope compositions of parent rock apatites (4–35 for δ¹⁸O_c and −11 to +1 for δ¹³C_c). In any profile, the apatites of weathering origin can exhibit lower, similar or higher δ¹⁸O_c values than parent rock apatites. In contrast, their δ¹³C_c values are systematically and significantly lower than those of the parent rock apatites. Apatites formed as a result of weathering in laterites can therefore be readily distinguished from apatites of other origin on the basis of their isotope composition.Assuming that apatite CO₃ fractionates O in a way similar to calcite CO₃, the structural carbonate group of the apatites of weathering origin appears to form in approximate isotopic equilibrium with the weathering solutions. The very low δ¹³C_c values exhibited by these apatites indicate that the dominant sources of dissolved CO₂ in the soil water are organic. The isotope composition of structural carbonate in apatite of weathering origin in lateritic profiles may provide useful information for paleoenvironmental studies.     

The precise positioning of lunar farside lander using a four-way lander-orbiter relay tracking mode

China is planning to land a spacecraft on the farside of the Moon, a premiere, by 2018. In essence, the traditional tracking modes, based on direct visibility, cannot operate for the lunar farside lander tracking, and therefore a relay satellite, visible at the same time by both the lander and the Earth, will be required, operating in the so-called four-way mode (Earth-relay satellite-lander-relay satellite-Earth). In this paper, we firstly give the mathematical formulation of the four-way relay tracking mode and of its partial derivatives with respect to the relevant parameters, implemented in our POD software WUDOGS (Wuhan University Deep-space Orbit determination and Gravity recovery System). In a second step, in simulation mode, we apply this relay mode to determining lander coordinates, which are absolutely needed for a sample return mission, or to add constraints on rotation models of the Moon. The results show that with Doppler measurements at a 0.1 mm/s error level, the positioning of the farside lander could be done at centimeters level (1-\(\delta\)) in the case of a circumlunar relay satellite; and at a 5 meters level (1-\(\delta\)) in the case of a Lagrange point (L2) Halo relay satellite.     

Elastic wave propagation in an irregularly layered medium

The indirect boundary element method (IBEM) is used to simulate wave propagation in two-dimensional irregularly layered elastic media for internal line sources. The method is based on the integral representation for scattered elastic waves using single layer boundary sources. Fulfillment of the boundary conditions leads to a system of integral equations. Results are obtained in the frequency domain and seismograins are computed through Fourier synthesis. In order to test and validate the method we present various comparisons between our results and the time series obtained analytically for a buried line source in a half-space and by using the recently developed spectral element method (SEM).     

Modélisation de propagation d’écoulement entre lits mineur et majeur sur les fleuves Sénégal et Niger

In the Senegal River valley and Niger Inner Delta, the annual floods inundate a wide floodplain consisting of a complex network of lakes and channels, where topographic information needed by standard hydraulic models is difficult to obtain. To represent the flood propagation between mainstream and floodplain, we use a model designed for flood propagation in river mainstreams with flat bed and large overflow and without topographic data. Depending on the water level in the riverbed, the model calibrated on the levels observed at two stations gives the level in the floodplains and propagation time between stations. Several cases are tested for various types of hydraulic connections between mainstream and floodplain. The model could correctly reproduce the flood rise and fall in the floodplain, even for a lake connected by a single channel to the riverbed or in the case of a strong attenuation of the flood between very distant stations.     

War landform mapping and classification on the Verdun battlefield (France) using airborne LiDAR and multivariate analysis

Acting as efficient earth-movers, soldiers can be viewed as significant geomorphological drivers of landscape change when replaced in the recent debates on Anthropocene Geomorphology. ‘Polemoforms’, generated by military activities, correspond with a set of human-made landforms of various sizes and geometries. They are particularly common on the World War One battlefield of Verdun (France) which ranks among the largest battles of attrition along the Western Front. The artillery bombardments and building of defensive positions in that battle significantly altered the landscape, resulting in thousands of shell craters, dugouts, and gun positions that have altered both the meso and microtopography. This paper proposes an innovative methodology to make an exhaustive inventory of these small-scale conflict-induced landforms (excluding linear features such as trenches) using a digital terrain model (DTM) acquired by airborne LiDAR on the whole battlefield. Morphometric analysis was conducted using Kohonen's self-organizing maps (SOMs) and hierarchical agglomerative clustering (HAC) in order to quantify and classify the high number of war landforms. This combined approach allowed for mapping more than one million landforms which can be classified into eight different shapes including shell craters and various soldier-made landforms (i.e. shelters, gun positions, etc.). Detection quality evaluation using field observations revealed the algorithm successfully classified 93% of shell craters and 74% of anthropologically constructed landforms. Finally, the iconographic database and map series produced will help archaeologists and foresters to better manage the historic site of Verdun, today covered by a large forest of ~10 000 ha. © 2019 John Wiley & Sons, Ltd.     

Use of IGS products in TAI applications

The Bureau International des Poids et Mesures (BIPM) is in charge of producing International Atomic Time TAI. In this aim, it uses clock data from more than 60 laboratories spread worldwide. For two decades, GPS has been an essential tool to link these clocks, and products from the International GNSS Service (IGS) have been used to improve the quality of these time links since its creation in the early 1990s. This paper reviews the various interactions between the IGS and time activities at the BIPM, and shows that TAI has greatly benefited from IGS products so that their availability is now an essential need for the quality of TAI links. On the other hand, IGS has also benefited from introducing time laboratories equipped with highly stable clocks in its network of stations. In the future, similar products will be needed for an ensemble of satellite systems, starting with GLONASS and GALILEO. It will be a major challenge to the IGS to obtain a consistent set of products, particularly for what concerns satellite clocks and inter-system bias values.     

Spatial Modeling of Geotechnical Information Using GML

Geotechnical data characterizes the geometry and physical properties of soil deposits, which are determined from field observations, in-situ and laboratory tests, and engineering analyses. Until now, geotechnical information was mainly described and exchanged as relational data, which occasionally included spatial characteristics. Hereafter, the spatial features of geotechnical data are investigated by invoking the geotechnical data model of the Association of Geotechnical and Geoenvironmental Specialists (AGS), which is widely used in the United Kingdom to exchange geotechnical data in engineering practice. The basic geometric objects in AGS geotechnical data are first identified. These geometric objects are mapped to basic geometric features of the Geography Markup Language (GML). AGS data can therefore be fully rendered using GML-conformant schemas, which make geotechnical data readily importable into GML-aware applications. The data can be also imported to mainstream GIS applications using Extensible Markup Language (XML) transformations. This article demonstrates the rendition of AGS data format to a GML-conformant schema and illustrates the implementation of the new format through a few geotechnical examples.     

50-year record and solid state speciation of mercury in natural and contaminated reservoir sediment

Contaminated fluvial sediments represent both temporary sinks for river-borne pollutants and potential sources in case of natural and/or anthropogenic resuspension. Reservoir lakes play a very important role in sediment dynamics of watersheds and may offer great opportunities to study historical records of river-borne particles and associated elements transported in the past. The fate and potential environmental impact of Hg depends on its abundance, its carrier phases and its chemical speciation. Historical Hg records and solid state Hg speciation were compared in sediments from two contrasting reservoirs of the Lot River (France) upstream and downstream from a major polymetallic pollution (e.g. Cd, Zn) source. Natural (geochemical background) and anthropogenic Hg concentrations and their relationships with predominant carrier phases were determined. The results reveal important historical Hg contamination (up to 35 mg kg⁻¹) of the downstream sediment, reflecting the historical evolution of industrial activity at the point source, i.e. former coal mining, Zn ore treatment and post-industrial remediation work. Single chemical extractions (ascorbate, H₂O₂, KOH) suggest that at both sites most (∼75%) of the Hg is bound to organic and/or reactive sulphide phases. Organo-chelated (KOH-extracted) Hg, representing an important fraction in the uncontaminated sediment, shows similar concentrations (∼0.02 mg kg⁻¹) at both sites and may be mainly attributed to natural inputs and/or processes. Although, total Hg concentrations in recent surface sediments at both sites are still very different, similar mono-methylmercury concentrations (up to 4 μg kg⁻¹) and vertical distributions were observed, suggesting comparable methylation-demethylation processes. High mono-methylmercury concentrations (4–15 μg kg⁻¹) in 10–40 a-old, sulphide-rich, contaminated sediment suggest long-term persistence of mono-methylmercury. Beyond historical records of total concentrations, the studied reservoir sediments provided new insights in solid state speciation and carrier phases of natural and anthropogenic Hg. In case of sediment resuspension, the major part of the Hg historically stored in the Lot River sediments will be accessible to biogeochemical recycling in the downstream fluvial-estuarine environment.