利用卫星影像获得汶川地震之同震地表变形来探讨其断层几何模型(英文)

On 12th May 2008, a MW7.9 earthquake occurred on the Longmenshan fault in the mountains to the west of Sichuan Province, which shook many Asian cities and killed at least 69 000 people.     

Monitoring water flow in a clay-shale hillslope from geophysical data fusion based on a fuzzy logic approach

Seismic and electrical resistivity tomography allow subsurface characterization from acoustic P-waves (Vp), shear S-waves (Vs) velocities, and electrical resistivity (ρ). Both geophysical methods were used to monitor water flow during a controlled rainfall experiment on a clay-shale hillslope located in the Laval catchment at Draix (Alpes-de-Haute-Provence, France). The objectives of the rainfall experiment were to analyse the water infiltration processes and identify possible water pathways by combining multi-method observations. The seismic data provide information on fissure density and the electrical resistivity data provide information on soil water content within the hillslope. Changes of the Vp and electrical resistivity fields with time show some similar pattern. To go further in the analysis of the water flow a geophysical data fusion strategy based on fuzzy set theory is applied. The computed fuzzy cross-sections based on expert hypotheses show the possibility for the material to be saturated during the rainfall experiment. The data fusion process is repeated in time for each acquisition set. The relative difference between the obtained fuzzy cross-sections is calculated and reveals possible locations where water may be transferred within the hillslope.     

Grain structure of the Earth's inner core

The coarsening rate of an initial grain structure is calculated and compared to the inner core growth rate. An estimate of the present size of the grains in the centre of the core varies from 560 m to 12 km, depending on the value taken for the diffusion coefficient of iron in the core. Regardless of the hypotheses chosen, this size is homogeneous inside the inner core.     

Storm Surges in the Strait of Georgia Simulated with a Regional Model

The Strait of Georgia is a large, semi-enclosed body of water between Vancouver Island and the mainland of British Columbia connected to the Pacific Ocean via Juan de Fuca Strait at the south and Johnstone Strait at the north. During the winter months, coastal communities along the Strait of Georgia are at risk of flooding caused by storm surges, a natural hazard that can occur when a strong storm coincides with high tide. This investigation produces storm surge hindcasts using a three-dimensional numerical ocean model for the Strait of Georgia and the surrounding bodies of water (Juan de Fuca Strait, Puget Sound, and Johnstone Strait) collectively known as the Salish Sea. The numerical model employs the Nucleus for European Modelling of the Ocean architecture in a regional configuration. The model is evaluated through comparisons of tidal elevation harmonics and storm surge with observations. Important forcing factors contributing to storm surges are assessed. It is shown that surges entering the domain from the Pacific Ocean make the most significant contribution to surge amplitude within the Strait of Georgia. Comparisons between simulations and high-resolution and low-resolution atmospheric forcing further emphasize that remote forcing is the dominant factor in surge amplitudes in this region. In addition, local wind patterns caused a slight increase in surge amplitude on the mainland side of the Strait of Georgia compared with Vancouver Island coastal areas during a major wind storm on 15 December 2006. Generally, surge amplitudes are found to be greater within the Strait of Georgia than in Juan de Fuca Strait.     

An early Palaeozoic supra-subduction lithosphere in the Variscides: new evidence from the Maures massif

Petrographic and geochemical studies of peridotites and melagabbros from the Maures massif (SE France) provide new constraints on the Early Palaeozoic evolution of the continental lithosphere in Western Europe. Peridotites occur as lenses along a unit rooted in the main Variscan suture zone. They are dominantly spinel peridotites and minor garnet–spinel peridotites. Spinel peridotites represent both residual mantle and ultramafic cumulates. Mantle-related dunites and harzburgites display high temperature textures, with olivine (Mg#_0.90), orthopyroxene (Mg#_0.90) and spinel (TiO₂ < 0.2%; Cr#_0.64–0.83) compositions typical of fore-arc upper mantle. Ultramafic cumulates are dunite adcumulates, harzburgite heteradcumulates and mesocumulates, melagabbro heteradcumulates and amphibole peridotites, with olivine (Mg#_0.85–0.89), orthopyroxene (Mg#_0.86–0.89) and Cr-spinel (TiO₂ = 0.5–3.3%; Cr#_0.7–0.98) compositions typical of ultramafic cumulates. Cr-spinel compositions of both spinel peridotite types suggest their genesis in a supra-subduction zone lithosphere. Core to rim zoning in spinel is related to the incomplete influence of regional metamorphism and serpentinisation. The covariation of major and minor elements with Al₂O₃ for cumulates is consistent with igneous processes involving crystal accumulation. Both mantle and cumulate dunites and harzburgites have U-shaped REE patterns and extremely low trace element contents, similar to peridotites from modern fore-arc peridotites (South Atlantic) and from ophiolites related to supra-subduction zones (Semail, Cyclops, Pindos, Troodos). Melagabbros also have U-shaped REE patterns similar to xenoliths from the Philippine island arc, but also similar to intrusive ultramafic cumulates from the Semail nappe of Oman related to a proto-subduction setting. A wehrlite has a REE pattern similar to that of amphibole peridotites reflecting metasomatism of clinopyroxene-bearing peridotites due to subduction-related fluids. The Maures spinel peridotites and melagabbros are therefore interpreted as the lowermost parts of a crustal sequence and minor residual mantle of lithosphere generated in a supra-subduction zone during Early Palaeozoic time. Garnet–spinel peridotites are chemically close to melagabbros, but have recorded high pressure metamorphism before their retrogression similar to spinel peridotites into amphibolites to greenschists facies metamorphism. They indicate burial to mantle depths of the margin of the supra-subduction lithosphere during the Early Palaeozoic continental subduction. Both peridotite types were exhumed during the Upper Palaeozoic continental collision. Comparable observations from other Variscan-related peridotites, in particular of the Speik complex of the Autroalpine basement, and a common age for the subduction stage allow extension of these regional conclusions to a broad area sharing the Cambrian suture zone, extending from the Ossa-Morena to the Bohemian massif.     

The mark III Nançay radioheliograph The Radioheliograph Group

A north-south array has been added to the Mark II Nançay Radioheliograph (Radioheliograph Group, 1977). This instrument gives at 169 MHz two one-dimensional images of the Sun in the east-west and north-south directions including measurement of the circular polarization ratio. The main performances of this instrument are high space and time resolutions, flexible on line data processing and the possibility of off-line interactive data reduction. The method of calibration is briefly described. A few observations are presented.     

Ecotoxicological effects of a semi-submerged municipal dump (Castle harbour, Bermuda) on the Calico scallop Argopecten gibbus

A biomarker study was undertaken using the Calico scallop Argopecten gibbus to assess the ecotoxicological effects of a semi-submerged municipal dump on the adjacent patch reef lagoon ecosystem (Castle harbour, Bermuda). Caged scallops were deployed in situ for 2 months at various distances from the dump (50 m, 900 m and 2.7 km) and at a reference site (14 km). A suite of biomarkers comprising metallothionein (MT), lipid peroxidation (LPO), vitellin-like proteins (Vn), glutathione S-transferase (GST), DNA strand breaks and condition factor (CF) were investigated in various tissues of the scallop (gill, digestive gland and gonad). Levels of heavy metals were also measured in the whole scallop soft tissue. While there was some variation in response between tissues, in general the results indicated that the dump was negatively impacting scallops deployed in the adjacent marine environment: elevated levels of MT, DNA strand breaks, Vn and GST and reduced condition factor were found for scallops deployed nearest to the dump and at the site 1.5 km from this point source of contamination (Tuckers town) in Castle harbour, with respect to the reference site, North Rock (although this exhibited some degree of metal contamination). The gills from scallops deployed at the dump site were the most responsive tissue, with the highest expression of MT, LPO and DNA damage. This study indicates the potential of the Calico scallop as a convenient bioindicator species in the marine tropical benthos.     

Impact of environmental factors on in situ determination of iron in seawater by flow injection analysis

A sensitive method for iron determination in seawater has been adapted on a submersible chemical analyser for in situ measurements. The technique is based on flow injection analysis (FIA) coupled with spectrophotometric detection. When direct injection of seawater was used, the detection limit was 1.6 nM, and the precision 7%, for a triplicate injection of a 4 nM standard. At low iron concentrations, on line preconcentration using a column filled with 8-hydroxyquinoline (8HQ) resin was used. The detection limit was 0.15 nM (time of preconcentration = 240 s), and the precision 6%, for a triplicate determination of a 1 nM standard, allowing the determination of Fe in most of the oceanic regimes, except the most depleted surface waters. The effect of temperature, pressure, salinity, copper, manganese, and iron speciation on the response of the analyser was investigated. The slope of the calibration curves followed a linear relation as a function of pressure (C_p = 2.8 × 10^{− 5}P + 3.4 × 10^{− 2} s nmol^{− 1}, R² = 0.997, for Θ = 13 °C) and an exponential relation as a function of temperature (C_Θ = 0.009e^0.103Θ, R² = 0.832, for P = 3 bar). No statistical difference at 95% confidence level was observed for samples of different salinities (S = 0, 20, 35). Only very high concentration of copper (1000 × [Fe]) produced a detectable interference. The chemical analyser was deployed in the coastal environment of the Bay of Brest to investigate the effect of iron speciation on the response of the analyser. Direct injection was used and seawater samples were acidified on line for 80 s. Dissolved iron (DFe, filtered seawater (0.4 μm), acidified and stored at pH 1.8) corresponded to 29 ± 4% of Fe_a (unfiltered seawater, acidified in line at pH 1.8 for 80 s). Most of Fe_a (71 ± 4%) was probably a fraction of total dissolvable iron (TDFe, unfiltered seawater, acidified and stored at pH 1.8).     

Gen*: a generic toolkit to generate spatially explicit synthetic populations

Agent-based models tend to integrate more and more data that can deeply impact their outcomes. Among these data, the ones that deal with agent attributes and localization are particularly important, but are very difficult to collect. In order to tackle this issue, we propose a complete generic toolkit called Gen* dedicated to generating spatially explicit synthetic populations from global (census and GIS) data. This article focuses on the localization methods provided by Gen* that are based on regression, geometrical constraints and spatial distributions. The toolkit is applied for a case study concerning the generation of the population of Rouen (France) and shows the capabilities of Gen* regarding population spatialization.