Sigmoidal particle density distribution in a subplinian scoria fall deposit

A general expression to describe particle density distribution in tephra fall deposits is essential to improve fallout tephra mass determination and numerical modelling of tephra dispersion. To obtain particle density distributions in tephra fall deposits, we performed high-resolution componentry and particle density analyses on samples from the 2006 subplinian eruption of Tungurahua volcano in Ecuador. Six componentry classes, including pumice and scoria, have been identified in our sample collection. We determined the class of 300 clasts in each 0.5? fractions from ?4.5? to 3.5? and carried out water pycnometry density measurements on selected size fractions. Results indicate that the mean particle density increases with ? up to a plateau of ~2.6?g/cm³ for clasts finer than 1.5?. The density of scoria and pumice increases between ?3 and 1?, while dense particle density is sub-constant with grainsize. We show that the mean particle density ?? of the vesicular fractions is a function of grainsize i (? scale) given by a sigmoidal law: $ \mu (i)={{{K+\beta }} \left/ {{\left( {1+\alpha {e^{-ri }}} \right)}} \right.} $ , where K, ??, ?? and r are constants. These sigmoidal distributions can be used to determine accurately the load of each componentry class and should be applicable to many tephra deposits and for modelling purposes.     

Building frequency fluctuations from continuous monitoring of ambient vibrations and their relationship to temperature variations

Building frequencies (fundamental and higher modes) are a critical parameter especially in the field of structural health monitoring mainly based on the stability of the structural dynamic parameters of individual building (frequencies, damping and modes shape). One of the most used methods to find out these parameters is based on the use on ambient vibration analysis. In this work, we study the fluctuations over a month period of the fundamental frequencies (transverse and longitudinal) of a 3.5-story RC-building made of 2 identical units connected by a structural joint. Time independent building frequencies is a strong assumption; as illustrated by our experiment showing that over an observation period of a month, building frequencies fluctuate of about 3.5 %. A clear correlation is found between the building frequency fluctuations and temperature variations, with a phase-shift interpreted as the characteristic time of heat diffusion within the walls. This allows: (1) determining the thermal diffusivity of the structure, (2) inferring its relative stiffness variations, and (3) showing that its Young modulus varies linearly with temperature.     

Deep sea in situ excess pore pressure and sediment deformation off NW Sumatra and its relation with the December 26, 2004 Great Sumatra-Andaman Earthquake

The swath bathymetric data acquired during the “Sumatra Aftershocks” cruise from the Sunda trench in the Indian Ocean to the north of the Sumatra Island imaged several scars and deposits. In situ pore pressure measurements using the Ifremer piezometer and coring demonstrate that high excess pore pressure and sediment deformation was generated by a recent event in the scar of the slope failure zone identified by J.T. Henstock and co-authors. This excess pore pressure is localized in the upper sedimentary layers and is not related to an interplate subduction process. Numerical simulations of the hydrological system that take into account the hydro-mechanical properties of the upper sediment layer show that the excess pore pressure and sediment deformations could be generated at the time of the December 26, 2004 Great Sumatra Earthquake. The Sumatra Aftershocks team: J.-C. Sibuet, S. Singh, R. Apprioual, N.C. Aryanto, J. Begot, A. Cattaneo, A.P.S. Chauchan, R. Creach, J. Crozon, A. Domzig, N. Falleau, D. Graindorge, F. Harmegnies, Y. Haryadi, F. Klingelhoffer, S.K. Kolluru, J.-Y. Landuré, C. Le Lann, J. Malod, A. Normand, G. Oggian, C. Rangin, D. Restunin Galih, J.-L. Schneider, N. Sultan, M. Taufik, M. Umber and H. Yamaguchi.     

From marginal to conditional probability functions of parameters in a conceptual rainfall–runoff model: an event-based approach

ABSTRACT

A parameter estimation strategy for a conceptual rainfall–runoff (CRR) model applied to a storm sewer system in an urban catchment (Chassieu, Lyon, France) is proposed on the basis of event-by-event Bayesian local calibrations. The marginal distribution formed by locally-estimated parameters is divided into conditional functions, clustering the event-based parameters based on their transferability to similar rainfall events. The conditional functions showed to be consistent with an observed bimodality in the marginal representation, reflecting two different hydrological conditions mainly related to the magnitude of the rainfall intensities (high or low). The improvements achieved by expressing the parameter probability functions into a conditional form are shown in terms of accuracy (Nash-Sutcliffe efficiency criterion), precision (average relative interval length) and reliability (percentage of coverage) for simulating flow rate in 255 and 110 calibration/verification events.     

Influence of instruments on the H/V spectral ratios of ambient vibrations

For an optimal analysis of the H/V curve, it appears necessary to check the instrument signal to noise ratio in the studied frequency band, to ensure that the signal from the ground noise is well above the internal noise. We assess the reliability and accuracy of various digitizers, sensors and/or digitizer-sensor couples. Although this study is of general interest for any kind of seismological study, we emphasize the influence of equipment on H/V analysis results. To display the impact of the instrumental part on the H/V behavior, some series of tests have been carried out following a step-by-step procedure: first, the digitizers have been tested in the lab (sensitivity, internal noise...), then the three components sensors, still in the lab, and finally the usual user digitizers-sensors couple in lab and outdoors. In general, the digitizer characteristics, verified during this test, correspond well to the manufacturer specifications, however, depending on the digitizer, the quality of the digitized waveform can be very good to very poor, with variation from a channel to another channel (gain, time difference etc.). It appears very clearly that digitizers need a warming up time before the recording to avoid problems in the low-frequency range. Regarding the sensors, we recommend strongly to avoid the use of “classical” accelerometers (i.e., usual force balance technology). The majority of tested seismometers (broadband and short period, even 4.5 Hz) can be used without problems from 0.4 to 25 Hz. In all cases, the instrumentation should be checked first to verify that it works well for the defined study aim, but also to define its limit of use (frequency, sensitivity...).     

Apatite solubility in carbonatitic liquids and trace element partitioning between apatite and carbonatite at high pressure

We have measured apatite solubility in calcic carbonatitic liquids and determined apatite/melt partition coefficients for a series of trace elements, including the rare earth elements (REE), high field strength elements (HFSE), Rb, Sr, U-Th-Pb. Experiments were performed between 4 and 6 GPa, from 1200 to 1380 °C, using the multianvil apparatus. Trace element concentrations were determined by laser ablation ICP-MS and electron microprobe. In addition, a specific protocol was designed to measure carbon concentration in the apatites, using the electron microprobe. Two starting apatite samples were used in order to test for the effect of apatite chemistry on partitioning behavior.Apatite solubility is lower in calcitic melts by a factor 3-5 compared to dolomitic melts (3-5.5 vs. 10-18 wt.% P₂O₅ in melt). We interpret this difference in terms of solubility product in the liquid and propose an empirical model for apatite saturation that takes into account melt calcium content. We conclude that calcitic melts that may form by melting of carbonated eclogites could be saturated with residual apatite, contrary to dolomitic melts formed in carbonated peridotites.Compatibility behavior of the REE depends on apatite silica content: REE are compatible in apatites containing 3.5-5 wt.% SiO₂, with values between 1.5 and 4, whereas REE are incompatible in apatites containing 0.2 wt.% SiO₂. HFSE, U, Th, and Y are compatible in silica-rich apatite, with while . Strontium is always retained in the melt, with of the order of 0.5. Lead appears to be incompatible in apatite, although this finding is weakened by almost complete Pb loss to sample container. High silica concentration favors REE incorporation in apatite by allowing for charged balanced coupled substitution. Sulfur and carbonate may also favor REE incorporation in apatite. Our results allow to reconcile previously published experimental determinations of REE partitioning. We use our experimentally determined partition coefficients to investigate the impact of residual apatite during partial melting of recycled carbonated material (eclogite + sediments) and discuss how the chemical characteristics of the produced liquids can be affected by residual apatite.     

Impact of nitrogenous fertilizers on carbonate dissolution in small agricultural catchments: Implications for weathering CO2 uptake at regional and global scales

The goal of this study was to highlight the occurrence of an additional proton-promoted weathering pathway of carbonate rocks in agricultural areas where N-fertilizers are extensively spread, and to estimate its consequences on riverine alkalinity and uptake of CO₂ by weathering. We surveyed 25 small streams in the calcareous molassic Gascogne area located in the Garonne river basin (south-western France) that drain cultivated or forested catchments for their major element compositions during different hydrologic periods. Among these catchments, the Hay and the Montoussé, two experimental catchments, were monitored on a weekly basis. Studies in the literature from other small carbonate catchments in Europe were dissected in the same way. In areas of intensive agriculture, the molar ratio (Ca + Mg)/HCO₃ in surface waters is significantly higher (0.7 on average) than in areas of low anthropogenic pressure (0.5). This corresponds to a decrease in riverine alkalinity, which can reach 80% during storm events. This relative loss of alkalinity correlates well with the content in surface waters. In cultivated areas, the contribution of atmospheric/soil CO₂ to the total riverine alkalinity (CO_{2 ATM-SOIL}/HCO₃) is less than 50% (expected value for carbonate basins), and it decreases when the nitrate concentration increases. This loss of alkalinity can be attributed to the substitution of carbonic acid (natural weathering pathway) by protons produced by nitrification of N-fertilizers (anthropogenic weathering pathway) occurring in soils during carbonate dissolution. As a consequence of these processes, the alkalinity over the last 30 years shows a decreasing trend in the Save river (one of the main Garonne river tributaries, draining an agricultural catchment), while the nitrate and calcium plus magnesium contents are increasing.We estimated that the contribution of atmospheric/soil CO₂ to riverine alkalinity decreased by about 7-17% on average for all the studied catchments. Using these values, the deficit of CO₂ uptake can be estimated as up to 0.22-0.53 and 12-29 Tg¹ yr⁻¹ CO₂ on a country scale (France) and a global scale, respectively. These losses represent up to 5.7-13.4% and only 1.6-3.8% of the total CO₂ flux naturally consumed by carbonate dissolution, for France and on a global scale, respectively. Nevertheless, this loss of alkalinity relative to the Ca + Mg content relates to carbonate weathering by protons from N-fertilizers nitrification, which is a net source of CO₂ for the atmosphere. This anthropogenic CO₂ source is not negligible since it could reach 6-15% of CO₂ uptake by natural silicate weathering and could consequently partly counterbalance this natural CO₂ sink.     

Formation of U-depleted rhyolite from a basanite at El Hierro, Canary Islands

Phonolite and trachyte are the felsic magmas of the alkaline magma suites, which characterize the Canary Islands. The October 2011 submarine eruption off El Hierro, the westernmost island, nevertheless, produced a small volume of rhyolitic magma. The rhyolite occurred as highly vesicular, white coloured pumices enveloped in and mingled with darker coloured basanitic pumice. The basanitic pumice is relatively crystal poor with a few euhedral olivines (mostly Fo_77–79), clinopyroxenes and Fe-rich spinels, whereas very rare olivine of same composition is found together with equally rare Fe-sulphide and FeTi-rich oxides in the rhyolite. The Fe–Mg exchange equilibrium in the oxides permits to calculate an equilibrium temperature of 970–890 °C for the rhyolite, in agreement with quartz-melt equilibrium at ca. 930 °C. A striking mineralogical feature of the rhyolite is the presence of rounded to contorted grains of milky quartz, which are xenocrysts incorporated and partly dissolved into the magma. Analyses of residual volatile concentrations in the glasses show that the rhyolite melt was highly degassed, whereas the basanitic glass still has important halogen concentrations. Trace element patterns of the mafic glasses and their elevated incompatible element concentrations are typical of the western Canary Island basanites. In contrast, the trace element composition of the rhyolite shows surprisingly low concentrations for all elements except the most incompatible ones (e.g. Rb, Ba, K and Th). All other measured LILE, HFSE and REE have significantly lower concentration than the basanitic counterpart that can be explained by fractionation of accessory phases (1 % apatite, 1 % sphene and 0.1 % zircon). Surprisingly, low U concentration is presumably related to elevated oxygen fugacity in the rhyolite, causing U to be in a hexavalent state, and fluxing of F-rich gas leading to volatilization of UF₆, known to emanate at low temperature. The results suggest that a gas-rich basanitic melt remobilized a small volume of stagnant rhyolitic melt formed by incorporation of approximately 10 % quartz-rich sediment into a late differentiate of trachytic composition. Sediments at the interface of an old oceanic crust adjacent to a continental shield and younger volcanic island are likely to act as magma traps were sediment assimilation may alter the mantle-derived magma composition. Quartz assimilation thus explains the production of rhyolite magma in a volcanic island characterized by an alkaline magma series from primitive basanites to trachytes.