Natural tracers for identifying the origin of the thermal fluids emerging along the Aegean Volcanic arc (Greece): Evidence of Arc-Type Magmatic Water (ATMW) participation

The Aegean volcanic arc is the result of a lithosphere subduction process during the Quaternary time. Starting from the Soussaki area, from west to east, the arc proceeds through the islands of Egina, Methana, Milos, Santorini, the Columbus Bank, Kos and Nisyros. Volcano-tectonic activities are still pronounced at Santorini and Nisyros in form of seismic activity, craters of hydrothermal explosions, hot fumaroles and thermal springs. A significant number of cold water springs emerge in the vicinity of hot waters on these islands.Chemical and isotopic analyses were applied on water and fumaroles samples collected in different areas of the volcanic arc in order to attempt the assessment of these fluids. Stable isotopes of water and carbon have been used to evaluate the origin of cold and thermal water and CO₂.Chemical solute concentrations and isotopic contents of waters show that the fluids emerging in Egina, Soussaki, Methana and Kos areas represent geothermal systems in their waning stage, while the fluids from Milos, Santorini and Nisyros proceed from active geothermal systems.The δ²H–δ¹⁸O–Cl^? relationships suggest that the parent hydrothermal liquids of Nisyros and Milos are produced through mixing of seawater and Arc-Type Magmatic Water (ATMW), with negligible to nil contribution of local ground waters and with very high participation of the magmatic component, which is close to 70% in both sites. A very high magmatic contribution to the deep geothermal system could occur at Santorini as well, perhaps with a percentage similar to Nisyros and Milos, but it cannot be calculated because of steam condensation heavily affecting the fumarolic fluids of Nea Kameni before the surface discharge.The parent hydrothermal liquid at Methana originates through mixing of local groundwaters, seawater and ATMW, with a magmatic participation close to 19%. All in all, the contribution of ATMW is higher in the central–eastern part of the Aegean volcanic arc than in the western sector. This difference, which is spotted in the variable isotopic composition of the sampled fluids from west to east along the arc, is probably due to several causes, including the tectonic regime, the depth of the deep reservoir below sea level, the age of volcanic activity and in general the geomorphologic state of each island.     

The sediment-fill of Pago Pago Bay (Tutuila Island,American Samoa): New insights on the sediment record of past tsunamis

Extensive bathymetric and two-dimensional seismic surveys have been carried out and cores collected in Pago Pago Bay (Tutuila, American Samoa) in order to describe and gain a better understanding of the sediment fill of the bay, which was affected by the 2009 South Pacific Tsunami. Eight sedimentary units were identified over the volcanic bedrock. The basal transgressive unit displays retrograding onlaps towards the shore, whereas the overlying seven aggradational layers alternate between four draping units and three pinching out seaward units. ‘Core to seismic’ correlation reveals that draping units are composed of homogeneous silts, while pinching out units are dominated by very coarse coral fragments showing fresh cuts, mixed with Halimeda plates. The basal unit is attributed to transgressive sedimentation in response to flooding of the bay after the last glacial maximum, followed by the upper aggradational units corresponding to highstand sedimentation. The changeovers in these upper units indicate an alternation between low-energy silt units and high-energy coral debris units interpreted as tsunami-induced deposits. The ¹⁴C dating reveals that high-energy sedimentation units can last up to approximately 2000 years while low-energy sedimentation units can last up to approximately 1000 years. This alternation, deposited during the last highstand, may be explained by cycles of tectonic activity and quiescence of the Tonga Trench subduction, which is the main source of tsunamigenic earthquakes impacting the Samoan archipelago. In the uppermost silt unit, only the geochemical signature of the terrestrial input of the 2009 SPT backwash deposits was detected between 7 cm and 9 cm depth. Hence, Pago Pago Bay offers a unique sediment record of Holocene bay-fill under the impact of past tsunamis intermittently during the last 7000 years.     

Nankai Trough, Japan Trench and Kuril Trench: geochemistry of Fluids sampled by submersible “Nautile”

Deep-water samples collected during the Kaiko project are often associated with biological communities located on geological structures favorable to fluid venting. The evidence of fluid venting are the temperature anomalies, the decrease in sulfate concentrations, the content in methane and the lowC₁(C₂ +C₃) ratio of light hydrocarbons. Because of large dilution by ambiant seawater during sampling it is difficult to compute the composition of the advected end-member pore fluid. Part of this fluid should originate in the “petroleum window”, i.e. at temperature about 60°C. Modeling the upward flow of water, taking into account the anomalies of temperature measured on the seafloor and the geochemical anomalies, leads to non-steady-state advection of the pore fluid. The occurrence of a deep component in the fluid has implications for the geological and tectonic models of the subduction zones off Japan.     

Effets thermique et hydrothermal de la coulée de basalte triasico-liasique sur les argiles du bassin d'Argana (Maroc)Thermal and hydrothermal effects of Triassic–Liassic basalt flow deposition on clays (Agana Basin,Morocco)

Thermal and hydrothermal effects of Triassic–Liassic basalt flow deposition on sedimentary series of the Argana Basin are responsible for major modifications in detrital clays, until 20 m in depth. It expressed by transformation of detrital smectite to corrensite and moreover to chlorite, and by increasing illite crystallinity. On the 2 m of sediments located immediately under the flow, magnesium-rich hydrothermal fluids have caused precipitation of new mineral phases. To cite this article: L. Daoudi, J.-L. Pot de Vin, C. R. Geoscience 334 (2002) 463–468.     

La diatomee marine chaetoceros simplex calcitrans paulsen et son environnement,I. Relations avec le milieu de culture; étude de la fraction insaponifiable,des stérols et des acides gras

Detailed analysis of the lipids present in seawater medium before and after growing cultures of the diatom Chaetoceros simplex calcitrans Paulsen in them has been carried out and compared with the lipids found in the diatom itself.Fatty Acids. The seawater contained 1.0 μg fatty acids/ml, C 16:0, C 18:0 and C 18:1 being the predominant components. After removal of 12-day cultures of the diatom, the medium contained 1.1 μg fatty acids/ml and showed 47% decrease of the C 18:0 acid, and decreases of 37% in the C 13:0 and 56% in the C 15:1 contents. The diatom itself contained 10.7% fatty acids of the dry weight, among which C 16:1, C 16:0 and C 14:0 predominated.Sterols. Cholesterol dominated the sterol composition of seawater, which was found to contain 0.15 μg total sterols/ml. The filtered culture medium contained 0.18 μg total sterols/ml, had lost some of its cholesterol content, but contained a significant amount of 24-methylene-cholesterol. Other minor sterols in seawater both prior to and after growing diatoms cultures in it were β-sitosterol, stigmasterol and campesterol.The diatom itself contained 0.47% total sterols of the dry weight with cholesterol and 24-methylene-cholesterol making up ca. 40% of the total each. Minor sterols found were stigmasterol (or fucosterol), campesterol and β-sitosterol.     

Predicting the impact of land use on the major element and nutrient fluxes in coastal Mediterranean rivers: The case of the Têt River (Southern France)

This study presents a detailed discrimination between the natural and anthropogenic sources of dissolved major elements in the Têt River, a typical small coastal river in the south of France. The main objectives were to quantify the materials that were released by human activities in the basin, and to determine the specific element inputs for the major land use forms. The dissolved material fluxes were estimated by weekly monitoring over a hydrological year (2000–2001) along the major water gauging stations, and the flux relationships were examined in the context of anthropogenic and natural basin characteristics as determined by a Geographical Information System (GIS). Intensive agricultural land use in the form of fruit tree cultures and vineyards has a strong control on the dissolved element fluxes in the river. Area specific element releases for these cultures are greatest for SO₄, with an estimated average of about 430 ± 18 keq km⁻² a⁻¹. This is ?11 times the natural SO₄ release by rock weathering. Also for K, NO₃, PO₄ and Mg, the specific releases were ?6 times the natural weathering rates (respectively about 44, 60, 4 and 265 keq km⁻² a⁻¹). Waste-waters are the other major source of anthropogenic elements in the river. They have an important role for the fluxes of inorganic P and N, but they are also a considerable source of Cl and Na to the river. For example, the average annual release of Cl is around 150 moles/inhabitant in the rural basin parts. Further downstream, however, where population density strongly increases, industrial effluents can enhance this value (>300 moles/inhabitant). The waste-waters contribute more than 70% of the dissolved inorganic N export to the sea, although their contribution to the average DOC export is almost negligible (3%).     

Experimental study of D/H isotopic fractionation factor of water adsorbed on porous silica tubes

This paper presents D/H isotopic fractionation factor measurements of water adsorbed on porous silica tubes in isotopic equilibrium with water vapor. The fractionation factor is measured as a function of vapor pressure ranging from 10% to 80% RH (relative humidity) at room temperature. It is shown that the fractionation factor between the adsorption film or nanometrically confined water and vapor is smaller than that between bulk liquid water and vapor. A qualitative analysis relates this deuterium depletion to a modification of the zero-point energy of the water isomers in the adsorbed/confined state. Furthermore, the behavior of the fractionation factor with RH shows two different linear trends. The transition between the two (at 60% RH) may indicate the transition from a two-dimensional adsorbed water to a three-dimensional water network.     

Evidence for fault-related directionality and localized site effects from strong motion recordings of the 2003 Boumerdes (Algeria) earthquake: Consequences on damage distribution and the Algerian seismic code

The Algiers–Boumerdes region has been struck by a destructive magnitude 6.8 (M_w) earthquake on May 21, 2003. The study presented in this paper is based on main shock strong motions from 13 stations of the Algerian accelerograph network. A maximum 0.58g peak ground acceleration (PGA) has been recorded at 20 km from the epicenter, only about 150 m away from a PGA of 0.34g, with both a central frequency around 5 Hz, explained by a strong very localized site effect, confirmed by receiver function technique results showing peaks at 5 Hz with amplitudes changing by a factor of 2. Soil amplifications are also evidenced at stations located in the quaternary Mitidja basin, explaining the higher PGA values recorded at these stations than at stations located on firm soil at similar distances from the epicenter. A fault-related directionality effect observed on the strong motion records and confirmed by the study of the seismic movement anisotropy, in agreement with the N65 fault plan direction, explains the SW–NE orientation of the main damage zone. In the near field, strong motions present a high-frequency content starting at 3 Hz with a central frequency around 8 Hz, while in the far field their central frequency is around 3 Hz, explaining the high level of damage in the 3- to 4-story buildings in the epicentral zone. The design spectra overestimate the recorded mean response spectra, and its high corner frequency is less than the recorded one, leading to a re-examination of the seismic design code that should definitively integrate site-related coefficient, to account for the up to now neglected site amplification, as well as a re-modeling of the actual design spectra. Finally, both the proposed Algerian attenuation law and the worldwide laws usually used in Algeria underestimate the recorded accelerations of the 6.8 (M_w) Boumerdes earthquake, clearly showing that it is not possible to extrapolate the proposed Algerian law to major earthquakes.     

Optical studies of natural deformation microstructures in feldspars (gneiss and pegmatites from Occitania,southern France)

Natural deformation microstructures of feldspars have been investigated optically in augen gneisses and pegmatites from southern France that exhibit microstructures due to polyphase deformation. This deformation was produced in both cases under a pressure of about 2 Kb and a temperature decreasing from about 550° to 200–300°C.In microcline, recrystallization, tension gashes and shear planes are the most important microstructures observed. In plagioclase, shear planes and kink-bands prevail. The development of these structures is controlled primarily by three parameters: temperature, influence of the surrounding material and amount of bulk strain. The orientation of the planes of anisotropy of the minerals with respect to the compression axis is also important. Some perthitic patterns are ascribed to deformation.     

Metal corrosion and argillite transformation at the water-saturated,high-temperature iron–clay interface: A microscopic-scale study

In this study, microscopic and spectroscopic techniques (scanning electron microscopy coupled with energy-dispersive X-ray analysis, Raman microspectroscopy, micro X-ray fluorescence spectroscopy, micro X-ray fine structure adsorption spectroscopy, and micro laser-induced breakdown spectroscopy) were combined to decipher the chemical and mineralogical properties of a saturated Fe–clay interface reacted at 90 °C and 50 bar for 8 months. The results collectively confirm the presence of a corrosion layer and a clay transformation layer. The corrosion layer is made of a magnetite-containing internal sublayer and a Fe-phyllosilicate external sublayer enriched in Na, with traces of goethite presumably resulting from sample reaction with air. The clay transformation layer is made of predominantly Ca-rich siderite (FeCO₃). It is depleted in Al and K, suggesting dissolution of rock-forming minerals. The corroded thickness determined from the amount of Fe in corrosion and transformation layers and assuming zero porosity equals 19 ± 9 μm. These data indicate that the interfacial clay was transformed by dissolution of calcite and clay minerals and precipitation of siderite close to the original surface. Silica released upon clay dissolution diffused into the corrosion layer and coprecipitated with oxidized Fe to form Fe-phyllosilicate.