Continuous monitoring of distal gas emanations at Vulcano,southern Italy

The increasing activity of Vulcano Island (Italy) since 1985 led to the initiation of continuous geochemical monitoring of the lateral soil gas emissions. On the basis both of their relative geochemical characteristics and of local considerations, three gaseous components were selected for monitoring, namely CO₂, He and ²²²Rn. Monitoring has been performed by means of specific analysers. Gases extracted from a water well located at the foot of the active cone were selected for monitoring, on the basis of their geochemical and isotopic characters that indicate their genetic link with central high temperature fumarolic gases emitted at the crater. Very strong variations of gas composition can be observed within one day (from 1 to about 94% for CO₂). Some variations display a daily character and can be correlated with that of atmospheric pressure. The three monitored gases are highly correlated, suggesting very high kinetics of gas transfer in the system. Because of these considerable variations of chemical composition, bulk concentrations obviously are not suitable for monitoring at Vulcano. However, the evolution with time of ratios such as ²²²Rn/CO₂ and He/CO₂ (the latter being corrected for atmospheric contamination) supplies numerical parameters that the expected to characterize the intensity of the degassing process. A new input of magmatic gases, that would lead to an increase in the ²²²Rn/CO₂ and He/CO₂ ratios, should therefore be detected by such a monitoring station.     

Defects and hydrolytic weakening in α-berlinite AlPO4 a structural analog of quartz

Berlinite, AlPO₄, is a structural analog of quartz and a number of physical properties are very similar in both materials. It is thus interesting to compare their mechanical properties and investigate the possible role of water. Constant strain rate tests on wet synthetic crystals have been performed at room temperature and at 600 MPa confining pressure. They indicate that \((000){1 \mathord{\left/ {\vphantom {1 3}} \right. \kern-0em} 3}\langle 11\bar 20\rangle \) is the easy glide system. Detailled investigation of the crystal structure shows that the corresponding a dislocations can glide in such a way that only the weaker Al—O bonds are broken. This explains why this glide system is much more easily activated in berlinite than in quartz. Deformation experiments at higher temperature and at atmospheric pressure clearly show a thermally activated regime. However the actually available crystals are so rich in water that above 300° C the dislocation structure resulting from deformation is completely hidden by water precipitation and coarsening of the as-grown fluid inclusions. Like for wet quartz this later phenomenon generates numerous bubbles and sessile dislocation loops.     

Flocculation Potential of Estuarine Particles: The Importance of Environmental Factors and of the Spatial and Seasonal Variability of Suspended Particulate Matter

Estuarine systems are complex environments where seasonal and spatial variations occur in concentrations of suspended particulate matter, in primary constituents, and in organic matter content. This study investigated in the laboratory the flocculation potential of estuarine-suspended particulate matter throughout the year in order to better identify the controlling factors and their hierarchy. Kinetic experiments were performed in the lab with a “video in lab” device, based on a jar test technique, using suspended sediments sampled every 2 months over a 14-month period at three stations in the Seine estuary (France). These sampling stations are representative of (1) the upper estuary, dominated by freshwater, and (2) the middle estuary, characterized by a strong salinity gradient and the presence of an estuarine turbidity maximum. Experiments were performed at a constant low turbulent shear stress characteristic of slack water periods (i.e., a Kolmogorov microscale >1,000 μm). Flocculation processes were estimated using three parameters: flocculation efficiency, flocculation speed, and flocculation time. Results showed that the flocculation that occurred at the three stations was mainly influenced by the concentration of the suspended particulate matter: maximum floc size was observed for concentrations above 0.1 g l⁻¹ while no flocculation was observed for concentrations below 0.004 g l⁻¹. Diatom blooms strongly enhanced flocculation speed and, to a lesser extent, flocculation efficiency. During this period, the maximum flocculation speed of 6 μm min⁻¹ corresponded to a flocculation time of less than 20 min. Salinity did not appear to automatically enhance flocculation, which depended on the constituents of suspended sediments and on the content and concentration of organic matter. Examination of the variability of 2D fractal dimension during flocculation experiments revealed restructuring of flocs during aggregation. This was observed as a rapid decrease in the floc fractal dimension from 2 to 1.4 during the first minutes of the flocculation stage, followed by a slight increase up to 1.8. Deflocculation experiments enabled determination of the influence of turbulent structures on flocculation processes and confirmed that turbulent intensity is one of the main determining factors of maximum floc size.     

Undrained behaviour of polypropylene fibre reinforced sandy soil under monotonic loading

Soil improvement using fibres is widely used in soil stabilisation to prevent sand liquefaction. In order to study the undrained behaviour and liquefaction resistance of sand reinforced with polypropylene fibres, a series of triaxial compressive tests were conducted on unreinforced and reinforced Chlef sand with different contents of polypropylene fibres (0, 0.3, 0.5 and 0.8%). Samples were prepared at 30% and 80% relative densities representing loose and dense states respectively, and triaxial tests were performed at confining pressures of 50, 100 and 200 kPa. Tests results show that fibre inclusion has a significant effect on the shear strength and dilation of sandy soil. The increase in strength is function of fibre content, relative density and confining pressure. The maximum strength improvement for both loose and dense fibre-reinforced sand is more pronounced at higher confining pressure and at higher fibre content.     

The effects of Phaeocystis globosa bloom on the dynamics of the mineralization processes in intertidal permeable sediment in the Eastern English Channel (Wimereux, France)

In the Eastern part of the English Channel, high biomasses of the phytoplankton prymnesiophyceae Phaeocystisglobosa (reaching biomasses over 20 microg Chlal(-1)) are a recurrent spring event (March-June). A significant part of the pelagic Phaeocystis-derived organic matter can be broken down in the sandy permeable sediment that makes up most of the intertidal zone in this part of the Channel. Sediment characteristics, macrofaunal distribution, bacterial biomass, organic carbon content, sediment oxygen demand (SOD), and the sediment-water flux of dissolved inorganic nitrogen and silicates were calculated for an exposed sandy beach (Wimereux, France) over a two-year period (2004-2006). According to the data collected, the SOD remains relatively low throughout the whole survey (64-306 micromol m(-2)h(-1)), indicating limited mineralization. However, the same data reveals a temporal variability in the flux, with a sharp increase in the SOD and ammonium released in spring when Phaeocystis-derived phytodetritus was deposited. The organic carbon content and bacterial biomass values indicate similar patterns of increase in response to the phytodetritus deposit. The nitrogen cycle also appears to be modified during the Phaeocystis bloom, with a clear stimulation of nitrification. The influence of various factors (e.g., temperature, nutrient concentrations, and bacterial activity) on the temporal fluctuations of the exchanges is discussed, as are the direct effects of spring bloom. A synthesis of the annual cycle of the mineralization dynamics in this permeable sediment type is also presented.     

Synthetic fluid inclusions. XV. TEM investigation of plastic flow associated with reequilibration of fluid inclusions in natural quartz

The nature and abundance of dislocations in quartz surrounding fluid inclusions were studied to obtain a better understanding of processes associated with fluid inclusion reequilibration. Synthetic fluid inclusions containing 10 wt% NaCl aqueous solution were formed in three samples at 700 °C and 5 kbar. One of the samples was quenched along an isochore to serve as a reference sample. The other two samples were quenched along a P-T path that generated internal pressures in excess of the confining pressure. The two samples were held at the final reequilibration P-T conditions of 625 °C and 2 kbar for 30 and 180 days, respectively. Following the experiments, microstructures associated with fluid inclusions were examined with the TEM. Quartz in healed fractures in the reference sample that was quenched isochorically shows a moderate dislocation activity. Quartz adjacent to reequilibrated fluid inclusions in the other two samples, however, showed a marked increase in dislocation activity compared to the un-reequilibrated sample. Deformation of the inclusion walls occurred anisotropically by expansion of mobile dislocations in their slip systems. Dislocation expansion was controlled by glide in the rhombohedral planes {1 0 1 1} that was restricted to narrow zones (≤3 μm) in the immediate vicinity of the fluid inclusion walls outside of the healed fracture plane. These plastic zones were observed after both short term (30 days) and long term (180 days) experiments and are attributed to hydrolytic weakening of quartz around fluid inclusions owing to diffusion of water into the quartz matrix during the experiment. The close spatial association of submicroscopic water bubbles with dislocations, and the rarity of water bubbles in the reference sample, show clearly that in both the 30 and 180 day experiments reequilibration involves water loss from the fluid inclusions. Our results indicate that synthetic fluid inclusions in this study recover (chemically and volumetrically), even at relatively fast experimental loading rates, such that internal stresses never reach the point of brittle failure. The driving force for fluid inclusion deformation involves two related mechanisms: plastic deformation of hydrolytically weakened wet quartz in the healed fracture, and water leakage associated with preexisting and strain-induced dislocations. Received: 5 May 1998 / Accepted: 10 February 2000     

CCD BVI photometry and Coravel observations of stars in the open cluster NGC 2489

We present CCD BVI photometry for the southern open cluster NGC 2489 and its surrounding field. The sample consists of 2182 stars measured in an area of 13.6 × 13.6 arcmin², extending down to   V ∼ 21.5  . These data are supplemented with CORAVEL radial-velocity observations for seven red giant candidates. A cluster angular radius of 6.7 ± 0.6 arcmin, equivalent to 3.5 ± 0.3 pc, is estimated from star counts carried out inside and outside the cluster region. The comparison of the cluster colour–magnitude diagrams with isochrones of the Padova group yields   E ( B − V ) = 0.30 ± 0.05, E ( V − I ) = 0.40 ± 0.05  and   V − M _V = 12.20 ± 0.25  for log   t = 8.70 ( t = 500⁺¹³⁰₋₁₀₀ Myr)  and   Z = 0.019  . NGC 2489 is then located at 1.8 ± 0.3 kpc from the Sun and 25 pc below the Galactic plane. The analysis of the kinematical data allowed us to confirm cluster membership for six red giants, one of them being a spectroscopic binary. A mean radial velocity of 38.13 ± 0.33 km s⁻¹ was derived for the cluster red giants. The properties of a sample of open clusters aligned along the line of sight of NGC 2489 are examined.