U–Pb and Hf isotopic study of zircons from migmatised amphibolites in the Cathaysia Block: Implications for the early Paleozoic peak tectonothermal event in Southeastern China

Amphibolites occur in a number of localities in the Cathaysia Block, some of them have been migmatised and their protoliths represent basaltic magmas erupted in various tectonic settings. Four migmatised amphibolites were collected from Jiangxi and Fujian Provinces. Cathodo-luminescence images of zircons extracted from the representative amphibolites show unzoned or sector-zoned structure. LA-ICP-MS analysis indicates that most zircons have high Th/U ratios and yield U–Pb zircon ages of 446 ± 5, 435 ± 2, 434 ± 4 and 423 ± 2 Ma, respectively. Lu–Hf isotopic analysis on these zircons gives Hf model ages ranging from 900 to 1200 Ma. Based on lithological observations and previously published geochronological data, we interpret that these U–Pb ages record an important tectonothermal event that led to the migmatization. This early Paleozoic (Caledonian) tectonothermal event in the Southeastern China has a great tectonic implication for the evolutionary history of the Cathaysia Block.     

Modeling the 2D behavior of dry‐stone retaining walls by a fully discrete element method

The dry‐stone retaining walls (DSRW) have been tipped as a promising solution for sustainable development. However, before recently, their behavior is relatively obscure. In this study, discrete element method (DEM) approach was applied to simulate the plane strain failure of these walls. A commercial DEM package (PFC2D™) was used throughout this study. The authors used a fully discrete approach; thus, both the wall and the backfill were modeled as discrete elements. The methodology for obtaining the micromechanical parameters was discussed in detail; this includes the three mechanical sub‐systems of DSRWs: wall, backfill and interface. The models were loaded progressively until failure, and then the results were compared with the full‐scale experimental results where the walls were loaded, respectively, with hydrostatic load and backfill. Despite its complexity and its intensive calculation time, DEM model can then be used to validate a more simplified approach. Copyright © 2015 John Wiley & Sons, Ltd.     

Time‐scale analysis in unsaturated porous media under external wave loads

Extreme waves caused by tsunamis and storm surges can lead to soil failures in the near‐shore region, which may have severe impact on coastal environments and communities. Multiphase flows in deformable porous media involve several coupled processes and multiple time scales, which are challenging for numerical simulations. The objective of this study is to investigate the roles of the various processes and their interactions in multiphase flows in unsaturated soils under external wave loading, via theoretical time‐scale analysis and numerical simulations. A coupled geomechanics–multiphase flow model based on conservation laws is used. Theoretical analysis based on coupled and decoupled models demonstrates that transient and steady‐state responses are governed by pore pressure diffusion and saturation front propagation, respectively, and that the two processes are essentially decoupled. Numerical simulations suggest that the compressibility of the pore fluids and the deformation of the soil skeleton are important when the transient responses of the media are of concern, while the steady‐state responses are not sensitive to these factors. The responses obtained from the fully coupled numerical simulations are explained by a simplified time‐scale analysis based on coupled and decoupled models. Copyright © 2010 John Wiley & Sons, Ltd.     

Fluid composition and evolution in coesite-bearing rocks (Dora-Maira massif,Western Alps): implications for element recycling during subduction

Fluid inclusions and F, Cl concentration of hydrous minerals were analysed in the coesite-pyrope quartzite, the interlayered jadeite quartzite and their country-rock gneiss from the Dora-Maira massif using a combination of microthermometry, Raman spectrometry, synchrotron X-ray microfiuorescence and electron microprobe analysis. Three populations of fluid inclusions were recognized texturally and can be related to distinct metamorphic stages. A low-salinity aqueous fluid occurs in the retrogressed country gneiss and as late secondary inclusions in jadeite quartzite and chloritized pyrope. An earlier secondary population is found in matrix quartz of the jadeite- and pyro-pe-quartzites. This population can be related to the early decompression and so to incipient breakdown of garnet into phlogopite-bearing assemblages. The inclusion fluid is highly saline (up to 84 wt% equivalent NaCl) and contains Na, Ca, Fe, Cu and Zn as major cations. In pyrope quartzite, additional K was found in these brines, which locally coexist with CO₂-rich inclusions. The oldest fluid inclusions are preserved in kyanite grains included in fresh pyrope and in pyrope itself. In pyrope, all inclusions have decrepitated and contain magnesite, an Mg-phosphate, sheet-silicate(s), a chloride and an opaque phase, with no fluid preser ved. In contrast, the kyanite inclusions in pyrope preserve primary H₂O-CO₂ low-salinity fluid inclusions, probably owing to the low compressibility of the kyanite inclusions and host garnet. In spite of in-situ re-equilibration, these inclusions can be interpreted as relics of the dehydration fluid that attended pyrope growth. These correlations between textural and chemical fluid inclusion data and metamorphic stages are consistent with the fluid composition calculated from the halogen content of different generations of phlogopite and biotite. The preservation of different fluid compositions, both in time and space, is evidence for local control and possibly origin of the fluids, in agreement with isotopic data. These results, in particular the absence of CO₂ in the jadeite quartzite, are best interpreted in terms of a fluid-melt system evolution. With increasing metamorphism, partitioning of H₂O, Na, Ca, Fe and heavy metals into melt (jadeite quartzite) and Mg, Na/K, F, CO₂ and P(?) into a residual aqueous fluid can account for depletion in Na, Ca and Fe of the pyrope quartzite. During the retrograde path, a _{H 2 O} rose as melt crystallized, generating the two populations of hypersaline and water-rich fluids that were highly reactive to pyrope. The process of fluid-melt interaction envisioned here coupled with models of melt extraction in subduction zones provides an attractive opportunity for the instantaneous ( < 1 Ma) and selective transport of elements between a downgoing slab and the overlying mantle wedge.     

Investigating the swelling pressure of highly compacted bentonite/sand mixtures under constant-volume conditions

Acta Geotechnica - Compacted bentonite/sand mixtures are often considered as sealing/backfilling materials in deep geological disposal for radioactive waste. This study investigates the swelling...     

Ozone production due to emissions from vegetation burning

Ozone has been observed in elevated concentrations by satellites over areas previously believed to be background. There is meteorological evidence, that these ozone plumes found over the Atlantic Ocean originate from vegetation fires on the African continent.In a previous study (DECAFE-88), we have investigated ozone and assumed precursor compounds over African tropical forest regions. Our measurements revealed large photosmog layers at altitudes from 1.5 to 4 km. Both chemical and meteorological evidence point to savanna fires up to several thousand km upwind as sources.Here we describe ozone mixing ratios observed over western Africa and compare ozone production ratios from different field measurement campaigns related to vegetation burning. We find that air masses containing photosmog ingredients require several days to develop their oxidation potential, similar to what is known from air polluted by emissions from fossil fuel burning. Finally, we estimate the global ozone production due to vegetation fires and conclude that this source is comparable in strength to the stratospheric input.     

Stabilization of Atmospheric Concentrations of Greenhouse Gases

Given the present commitment of the developed countries according to the Kyoto Protocol, most published scenarios demonstrate that global greenhouse gases concentrations would not be stabilized at any level. In order to stabilize these concentrations, a deeper global involvement is needed. Taking Israel as an example of a `recently-developed' country, we assess the role that such countries could play by assuming voluntary commitments in strengthening global involvement. This case as a model may encourage a global scheme for curbing carbon emissions, in which the more developed countries assume a stronger role and the less developed countries participate according to the principle of common but differentiated responsibility. The scheme builds on the inverse relation that exists between the per capita gross domestic product and the rate of increase of emissions due to economic growth. According to this theoretical scheme, the voluntary commitments assumed by the `recently-developed' countries encourage the more developed countries to deepen their involvement by assuming more stringent reductions of emissions at home and transferring technological and financial means to the less developed countries. The proposed scheme would enable non-Annex I countries, both `recently-developed' countries and less developed countries, to participate much earlier in the net mitigation of greenhouse gases.     

Carboxylic monoacids in the air of mayombe forest (Congo): Role of the forest as a source or sink

In the tropical rain forests of the Congo during the dry season, from June to September 1987, carboxylic acid partial pressures (P _gas) in the air above the canopy, at ground level, and at the boundary layer, were estimated from water samples such as fog and rainwater. The concentrations of these acids were also measured in the sap of tree leaves. Tree leaves act as a sink or as a source if the acid P _gas is greater of lower than the acid concentrations in molecular form in sap. For each of these soluble gases, there is a value of P _gas where the exchange is nul. This is called the compensation point. Values of the compensation point for some tree leaves were evaluated according to Henry's law. Henry's law coefficients at ppm levels were redetermined for formic (HCOOH), acetic (CH₃COOH), propionic (CH₃CH₂COOH), and isobutyric (CH₃CH(CH₃)COOH) acids.By comparison of P _gas and compensation points, it is concluded that the forest was a potential source for these acids. The soil-or the litter-acts as a significant source of a carboxylic acid of C₃ or C₄ atoms in the aliphatic chain. This carboxylic acid, not yet fully characterized, could play an important role in the rain acidity in forested zones of the equatorial areas.The direct emission of these carboxylic acids by vegetation was the main source in the boundary layer above the forest. The average emissions were 3.1×10⁹, 7.8×10⁹, and 8.4×10⁹ molecules cm^-2 s^-1 for HCOOH, CH₃COOH, and CH₃CH₂COOH, respectively. The savanna is an exogenous source of HCOOH and CH₃CH₂COOH during moderately rainy days for 30% of the time. The ozonolysis of isoprene seems to be a small source of HCOOH.     

Estimating the error in vertically interpolated forecast‐observation differences: U‐ and v‐wind components

Abstract

Data assimilation in numerical weather forecasting corrects current forecast values by subtracting a portion of interpolated forecast‐minus‐observation differences at the points of a three‐dimensional grid. Deviations used in updating a forecast data field are forecast errors obtained or derived from observations available at update time. When observations are missing at mandatory levels, construction of full vertical soundings by interpolation introduces extraneous errors. The present paper is concerned with determination of the error in vertical extrapolations of surface winds, and of aircraft and satellite cloud‐tracked winds. In addition it examines the effect on accuracy of using location‐specific statistics compared to averaged statistics as the basis for the interpolation weighting scheme and compares errors of one‐ and two‐variable interpolations.

Interpolation accuracy tests demonstrate the influence of the interpolation scheme on the quality of interpolated information used in forecast updating. The results show that the level of accuracy exceeds the benchmark provided by monthly mean forecast error values only with bivariate interpolation of wind components from off‐level data sources.