Quantitative reconstruction of climatic variations during the Bronze and early Iron ages based on pollen and lake-level data in the NW Alps, France

Vegetation and lake-level data from the archaeological site of Tresserve, on the eastern shore of Lake Le Bourget (Savoie, France), are used to provide quantitative estimates of climatic variables over the period 4000–2300 cal BP in the northern French Pre-Alps, and to examine the possible impact of climatic changes on societies of the Bronze and early Iron Ages. The results obtained indicate that phases of higher lake level at 3500–3100 and 2750–2350 cal BP coincided with major climate reversals in the North Atlantic area. In west-central Europe, they were marked by cooler and wetter conditions. These two successive events may have affected ancient agricultural communities in west-central Europe by provoking harvest failures, more particularly due to increasing precipitation during the growing season. However, archaeological data in the region of Franche-Comté (Jura Mountains, eastern France) show a general expansion of population density from the middle Bronze Age to the early Iron Age. This suggests a relative emancipation of proto-historic societies from climatic conditions, probably in relation to the spread of new modes of social and economic organisation.     

The Landscape of Diversity in U.S. Higher Education Geography

Palynological analyses were completed for the A and B horizons of a forested Mollic Hapludalf to determine type, amount, and distribution of pollen and spores within the soil solum. Hypotheses regarding the origin of pollen and the mechanisms of its movement within soil bodies are also advanced. Pollen downwash within the mineral soil seems to be very slow and confined to the uppermost porous and most homogenized part of the solum. The predominance of non-arboreal pollen at depth was believed to be a result of deposition with the loess parent material. High arboreal pollen frequencies in the upper horizons coupled with increases in non-arboreal types at depth indicate gradual ongoing mixing from the present vegetation into the soil.     

Reliable Procedure for Molecular Analysis of Airborne Microflora in Three Indoor Environments: An Office and Two Different Museum Contexts

Biological aerosols from air constitute a significant source of exposure to microorganisms in public places. Airborne microorganisms are involved in the development of certain respiratory symptoms, allergies, or infections among users and occupants. Various sampling instruments have commonly been used in aerobiology to collect bacteria and fungi suspended in the air. The objective of this study was to develop a reliable procedure for sampling in indoor public environments presenting different levels of occupancy, airborne bacteria and fungi to be subjected to molecular analysis (bacteria and fungi quantitative PCR, capillary electrophoresis single strand conformation polymorphism fingerprinting). Four different sampling devices were tested in situ in an office building (open‐plan type) and the sampling strategy chosen was tested in two museum contexts. In accordance with the drawbacks involved to our study (quantitative and qualitative aspects, cost, and overcrowding), cyclone device appeared to be most suitable. The results underline the effectiveness of this high‐volume aerosol sampling device for both qualitative and quantitative molecular analysis. Four in situ sampling collections were carried out in 1 day in the Louvre Museum to study quantitative and qualitative variations of airborne bacterial and fungal diversity. The quantitative results revealed a similar order of magnitude for the numbers of both bacteria and fungi. In the Louvre Museum, the samples yielded between 3.7 × 10⁴ and 4.1 × 10⁴ genome equivalent (GE) bacteria/m³ air and between 5.0 × 10⁴ and 5.9 × 10⁴ GE fungi/m³ air and in the Decorative Arts Museum between, 2.1 × 10⁴ and 2.5 × 10⁴ GE bacteria/m³ air and between 1.4 × 10⁴ and 1.7 × 10⁴ GE fungi/m³ air. The results also indicate that the dominant bacterial community displayed a stable structure over a short period of time whereas dominant eukaryotic airborne community appeared more variable.     

Growth fold controls on carbonate distribution in mixed foreland basins: insights from the Amiran foreland basin (NW Zagros,Iran) and stratigraphic numerical modelling

The evolution from Late Cretaceous to early Eocene of the well dated Amiran foreland basin in the NW Iranian Zagros Mountains is studied based on the reconstruction of successive thickness, palaeobathymetry and subsidence maps. These maps show the progressive forelandwards migration of the mixed carbonate‐siliciclastic system associated with a decrease in creation of accommodation. Carbonate facies variations across the basin suggest a structural control on the carbonate distribution in the Amiran foreland basin, which has been used as initial constraint to study the control exerted by syndepositional folding in basin architecture and evolution by means of stratigraphic numerical modelling. Modelled results show that shallow bathymetries on top of growing folds enhance carbonate production and basin compartmentalization. As a consequence, coarse clastics become restricted to the internal parts of the basin and only the fine sediments can by‐pass the bathymetric highs generated by folding. Additionally, the development of extensive carbonate platforms on top of the anticlines favours the basinwards migration of the depositional system, which progrades farther with higher fold uplift rates. In this scenario, build‐ups on top of anticlines record its growth and can be used as a dating method. Extrapolation of presented modelling results into the Amiran foreland basin is in agreement with an early folding stage in the SE Lurestan area, between the Khorramabad and Kabir Kuh anticlines. This folding stage would enhance the development of carbonate platforms on top of the anticlines, the south‐westward migration of the system and eventually, the complete filling of the basin north of the Chenareh anticline at the end of the Cuisian. Incremental thickness maps are consistent with a thin (0.4–2 km) ophiolite complex in the source area of the Amiran basin.     

Buried and Submerged Greek Archaeological Coastal Structures and Artifacts as Gauges to Measure Late Holocene Seafloor Subsidence off Calabria,Italy

This synthesis integrates recently acquired archaeological and geological data with earlier documented observations to shed light on the subsidence of ancient Greek coastal facilities in southern Italy. These are now positioned between former shorelines and inner shelf sectors at five Calabrian margin localities. Submergence of coastal to inner shelf facilities has resulted in part from sea‐level rise by about 2 m associated with glacio‐hydro‐isostatic factors since archaic to classic Greek time. This phenomenon alone, however, does not explain the wide variation of measured subsidence rates from site‐to‐site. The marked lowering of coastal site substrates by seismo‐tectonic activity (including extensional fault motion), stratal readjustments at depth, and compaction of underlying sediment sequences is significant. Four of the subsided facilities are positioned near emerged Calabrian areas where prevailing Holocene average annual land uplift rates range to ˜1.0 mm/yr; at the fifth, near Hipponion, terrains have risen by nearly 2 mm/yr. In marked contrast, submerged and/or buried structures record the following late Holocene long‐term average rates of coastal margin subsidence: Sybaris‐Thuri on the Taranto Gulf margin (˜0.5–1.0 mm/yr); Hipponion‐Vibo Valentia along the Tyrrhenian coast (˜0.8 to ˜3.2 mm/yr); and Locri‐Epizefiri, Kaulonia, and Capo Colonna on Calabria's Ionian margin (˜1.6, ˜1.6–2.4, and ˜4.0 mm/yr, respectively). © 2012 Wiley Periodicals, Inc.     

The effect of global warming on mortality

There is a significant relationship between ambient temperature and mortality. In healthy individuals with no underlying co-morbid conditions, there is an efficient heat regulation system which enables the body to effectively handle thermal stress. However, in vulnerable groups, especially in elderly over the age of 65 years, infants and individuals with co-morbid cardiovascular and/or respiratory conditions, there is a deficiency in thermoregulation. When temperatures exceed a certain limit, being cold winter spells or heat waves, there is an increase in the number of deaths. In particular, it has been shown that at temperatures above 27 °C, the daily mortality rate increases more rapidly per degree rise compared to when it drops below 27 °C.This is especially of relevance with the current emergency of global warming. Besides the direct effect of temperature rises on human health, global warming will have a negative impact on primary producers and livestock, leading to malnutrition, which will in turn lead to a myriad of health related issues. This is further exacerbated by environmental pollution.Public health measures that countries should follow should include not only health-related information strategies aiming to reduce the exposure to heat for vulnerable individuals and the community, but improved urban planning and reduction in energy consumption, among many others. This will reduce the carbon footprint and help avert global warming, thus reducing mortality.     

It starts at home? Climate policies targeting household consumption and behavioral decisions are key to low-carbon futures

Through their consumption behavior, households are responsible for 72% of global greenhouse gas emissions. Thus, they are key actors in reaching the 1.5 °C goal under the Paris Agreement. However, the possible contribution and position of households in climate policies is neither well understood, nor do households receive sufficiently high priority in current climate policy strategies. This paper investigates how behavioral change can achieve a substantial reduction in greenhouse gas emissions in European high-income countries. It uses theoretical thinking and some core results from the HOPE research project, which investigated household preferences for reducing emissions in four European cities in France, Germany, Norway and Sweden. The paper makes five major points: First, car and plane mobility, meat and dairy consumption, as well as heating are the most dominant components of household footprints. Second, household living situations (demographics, size of home) greatly influence the household potential to reduce their footprint, even more than country or city location. Third, household decisions can be sequential and temporally dynamic, shifting through different phases such as childhood, adulthood, and illness. Fourth, short term voluntary efforts will not be sufficient by themselves to reach the drastic reductions needed to achieve the 1.5 °C goal; instead, households need a regulatory framework supporting their behavioral changes. Fifth, there is a mismatch between the roles and responsibilities conveyed by current climate policies and household perceptions of responsibility. We then conclude with further recommendations for research and policy.     

Early Permian extensional shearing of an Ordovician granite: The Saint-Eutrope “C/S-like” orthogneiss (Montagne Noire,French Massif Central)

Dating the magmatic events in the Montagne Noire gneiss dome is a key point to arbitrate between the different interpretations of the Late Carboniferous–Early Permian tectonics in this southern part of the Variscan belt. The Saint-Eutrope orthogneiss crops out along the northern flank of the dome. We show that the protolith of this orthogneiss is an Ordovician granite dated at 455 ± 2 Ma (LA-ICP-MS U-Pb dating on zircon). This age is identical to that previously obtained on the augen orthogneiss of the southern flank, strongly suggesting that both orthogneiss occurrences have the same Ordovician protolith. The Saint-Eutrope orthogneiss experienced intense shearing along the Espinouse extensional detachment at ca. 295 Ma (LA-ICP-MS U-Pb-Th on monazite), an age close to that determined previously on mica by the ³⁹Ar-⁴⁰Ar method and contemporaneous with the emplacement age of the syntectonic Montalet granite farther to the west. This normal sense shearing reworked previous fabrics related to Variscan thrusting that can be still observed in the augen orthogneiss of the southern flank, and is responsible for the spectacular “C/S-like” pattern of the Saint-Eutrope orthogneiss. This work also shows that care is needed when dealing with C/S-type structures, since they can develop not only in syntectonic intrusions, but also in orthogneisses affected by an intense secondary deformation, at decreasing temperature.     

Microtextural investigation (SEM and TEM study) of phyllosilicates in a major thrust fault zone (Monte Perdido, southern Pyrenees): impact on fault reactivation

Thrusting fault zone in foreland basins are characterized by highly foliated zones generally enriched in phyllosilicates which can play a major role on the mechanical behaviour of the fault. In this context, investigations of synkinematic clay minerals permit to determine the origin of the fluid from which they precipitated as well as the mechanisms of deformation. Our study is focused on clay mineral assemblages (illite and chlorite) in a major thrust fault located in the Monte Perdido massif (southern Pyrenees), a shallow thrust that affects upper cretaceous-paleocene platform carbonates and lower Eocene marls and turbidites. It implied 3?km of displacement of the Monte Perdido thrust unit with respect to the underlying Gavarnie unit. In this area the cleavage development by pressure-solution is linked to the Monte Perdido and Gavarnie thrust activity. The core zone of the fault, about 6?m thick, consists of an interval of intensely deformed clay-bearing rocks bounded by major shear surfaces. The deformed sediment is markedly darker than the protolith. Calcite-quartz shear veins along the shear planes are abundant. Detailed SEM and TEM observations of highly deformed fault zone samples indicate that clay mineral enrichment in the core zone of the fault is not only related to passive increase by pressure-solution mechanism but that dissolution?Crecrystallization of phyllosilicates occurs during deformation. A mineral segregation is observed in the highly deformed zone. Newly formed 2M ₁ muscovite is present along the cleavage whereas IIb chlorite crystals fill S_V2 shear veins suggesting syntectonic growth of phyllosilicates in the presence of fluids in low-grade metamorphic conditions. These mineralogical reactions act as weakening processes and would favour Monte Perdido fault creeping.