From subduction to transform motion: a seabeam survey of the Hellenic trench system

Preliminary results of a multi-narrow beam survey of the Hellenic trench system, in the Eastern Mediterranean, are presented. The southwestern Ionian branch is divided in small basins, partly filled with Pleistocene sediments. The morphology suggests that the basins are deformed by a compressional stress acting roughly perpendicularly to the trench along N50°E. This direction is the direction of the regional slip vector of the shallow thrust-type earthquakes. The structure of the southeastern Pliny-Strabo branch is quite different. Narrow en-e´chelon slots, oriented N40°E, have been mapped within the main troughs oriented N60°E. The regional earthquake slip vector is also oriented along N40°E. We conclude that the Hellenic trench system is an active subduction system, dominated by thrust along the Ionian branch and by transform motion along the Pliny-Strabo branch.     

The Néel transition and magnetic properties of terrestrial,synthetic, and lunar ilmenites

The magnetic susceptibility of a terrestrial, synthetic and lunar ilmenite specimen has been measured from 4 to 300 K. All specimens had a single Néel temperature transition which ranged from 56 to 57.7 K. In one case the powdered specimen was partially aligned in the magnetic field prior to the susceptibility measurements and the Néel transition was observed to shift to 60 K indicating magnetic anisotropy. A study of several magnetic parameters calculated from the experimental data showed gross impurities in the terrestrial specimen, single-domain to multi-domain metallic iron in the synthetic specimen, and a small amount of superparamagnetic metallic iron in the lunar sample. No multidomain iron was observed in the lunar ilmenite. The results of electron spin resonance measurements were also in general agreement with these findings. Because of the absence of Fe³⁺ compared to most terrestrial samples it is suggested that the anisotropic magnetic parameters be determined on lunar ilmenite when a large enough single crystal becomes available.     

First evidence of Campanian radiolarians in Turkey and implications for the tectonic setting of the Upper Antalya Nappes

The definition and inventory of the upper units of the Antalya Nappes or “Calcareous Antalya Nappes” (CAN) are still a matter of controversies and often conflicting interpretations. In the Gedeller type locality, we logged a new succession that sheds light on the detailed stratigraphy of the Upper Antalya Nappes. The lower part of the series corresponds to the uppermost part of the Kemer Gorge Nappe and is overthrust by the Ordovician Seydişehir Formation of the Tahtalı Dağ Nappe. The newly described Gedeller Formation belongs to the Kemer Gorge Nappe and is represented by Campanian (Upper Cretaceous) Scaglia-type pelagic limestones, which yielded radiolarians of the Amphipyndax pseudoconulus Zone. It is demonstrated that the “Calcareous Antalya Nappes” are composed of three different nappes, the Kemer Gorge, Bakırlı and the Tahtalı Dağ nappes, all of them belonging to the Upper Antalya Nappes system.     

Micro-environmental controls on biomineralization: superficial processes of apatite and calcite precipitation in Quaternary soils, Roussillon, France

Calcium hydroxyapatite and calcite precipitates around bacteria were observed in 2-week-old alluvial topsoil (Roussillon area, SE France). This observation prompted a laboratory study of Ca²⁺ and PO₄³⁻ incorporation into hydroxyapatite and Ca²⁺ into calcite mediated by bacteria using similar topsoil material, but free from apatite and calcite. Subsamples were prepared using three different grain sizes, and experiments were undertaken using sucrose and different contents of Ca²⁺ and PO₄³⁻. Mineralization experiments proceeded over 5 days. Calcium and PO₄³⁻ sorption onto clay influenced the Ca/P ratio in the solutions. Hydroxyapatite and calcite precipitation only occurred in unsterilized samples. The presence of clay minerals promoted biomineralization.     

International Association of Geoanalysts' Protocol for the Certification of Geological and Environmental Reference Materials: A Supplement

The International Association of Geoanalysts (IAG) published a protocol for the certification of reference materials in close accord with the International Organisation for Standardisation (ISO) guidelines (Kane et al. 2003). This article supplements that protocol, providing additional discussion of best approaches for pre-selecting laboratories for participation in certification projects. This discussion also makes a distinction between inter-laboratory certifications, where n = 15 is the general standard, and expert laboratory certifications, where a much smaller number of laboratories will be deemed qualified to provide data of the quality needed for certification.     

A Workflow for Static Reservoir Modeling Guided by Seismic Data in a Fluvial System

Realistic and accurate static geologic models are an essential element needed to predict the behavior of subsurface reservoirs and play an important role in petroleum engineering. Data used in the development of a static geologic model are gathered from various sources, such as seismic, log, and core data, each of them providing information on different physical properties of interest and with varying degrees of resolution. Compiling all data from various sources into a single representation of the subsurface formation of interest is a daily challenge for many petroleum geologists and engineers. This paper describes a framework to develop and select process-mimicking models that are consistent with available seismic attributes, namely impedance. Using a process-mimicking modeling package, 75 models of a fluvial meandering system are generated, one of which is chosen as the “true” model and masked thereafter. The implemented selection method relies on the degree of similarity in the histogram of representations of clusters of all possible patterns in the seismic impedance domain based on each process-mimicking model and that of the “true” model at several resolutions. The results demonstrate the effectiveness of the use of a weighted average divergence distance across multiple levels to select process-mimicking models that honor seismic data the best.     

Prediction of extractable metals in retention pond sediments at surface coal mines

Fifty-two grab samples of bottom sediment in settling ponds were obtained at 17 surface coal mines in the eastern and midwestern U.S. A series of laboratory extraction procedures were designed to simulate a wide range of possible natural conditions. The three types of laboratory extraction procedures were (1) a low-pH buffered extract; (2) a series of low-pH, near-neutral-pH, and high-pH nonbuffered extracts; and (3) a DTPA extract. For the transition metals examined (Fe, Mn, Ni, Zn, Co, Cu, Cr, Fe, Al), higher percentages were extracted by the low-pH buffered extract than by the low-pH nonbuffered extract and the DTPA extract. Within the nonbuffered series, higher percentages of individual metals were extracted at lower pH levels. There was generally a consistent order of “extractability” for all the extracts performed. At the mines using a chemical treatment to neutralize acid mine drainage, Mn was the most mobile and Fe and Al the least mobile of the metals considered; at the mines not using a chemical treatment, Ni, Zn, and Co were among the most mobile and Fe, Al, and Cr the least mobile of the metals studied. Two stepwise regression procedures (maximum R² improvement and backward elimination) were used to suggest a ranking of independent variables that influence extractable metals. Statistically significant independent variables differed for the various metals. In general, the total amount of metal present was most important in determining metal extractability in the buffered extract at the mines using chemical treatment, and variables related to the natural acidity or alkalinity of the sediment and element interrelationships were important in the other extracts. A detailed examination of regression equations for the buffered extract suggests that it is possible to predict extractable metals using simple regression models based on the total amount of metals present, metals interrelationships, and sediment acidity or alkalinity.     

Where the buffalo roam: Boundaries and the politics of scale in the yellowstone region

For more than twenty years, the state of Montana has pursued a controversial policy of lethal control to manage winter migrations of bison from Yellowstone National Park. In the late 1990s, as the state and a number of federal agencies attempted to cooperatively outline a more palatable scenario for bison management, local environmental groups became active participants in the debate. This paper examines the strategies pursued by these organizations in the course of their attempt to construct a new, ecosystem-level territorial space and jurisdictional scale for bison, and places their struggle within the context of existing work in geography on the politics of scale. Ultimately, the failure of their efforts illustrates some of the important constraints faced by social groups that attempt to create new territorial regimes and new scales of resistance in the interstices of existing political structures.     

The effect of global warming on mortality

There is a significant relationship between ambient temperature and mortality. In healthy individuals with no underlying co-morbid conditions, there is an efficient heat regulation system which enables the body to effectively handle thermal stress. However, in vulnerable groups, especially in elderly over the age of 65 years, infants and individuals with co-morbid cardiovascular and/or respiratory conditions, there is a deficiency in thermoregulation. When temperatures exceed a certain limit, being cold winter spells or heat waves, there is an increase in the number of deaths. In particular, it has been shown that at temperatures above 27 °C, the daily mortality rate increases more rapidly per degree rise compared to when it drops below 27 °C.This is especially of relevance with the current emergency of global warming. Besides the direct effect of temperature rises on human health, global warming will have a negative impact on primary producers and livestock, leading to malnutrition, which will in turn lead to a myriad of health related issues. This is further exacerbated by environmental pollution.Public health measures that countries should follow should include not only health-related information strategies aiming to reduce the exposure to heat for vulnerable individuals and the community, but improved urban planning and reduction in energy consumption, among many others. This will reduce the carbon footprint and help avert global warming, thus reducing mortality.     

Geochemical constraints on the origin and tectonic setting of the serpentinized peridotites from the Paleoproterozoic Nyong series,Eseka area,SW Cameroon

Serpentinized rocks closely associated with Paleoproterozoic eclogitic metabasites were recently discovered at Eseka area in the northwestern edge of the Congo craton in southern Cameroon. Here, we present new field data, petrography, and first comprehensible whole-rock geochemistry data and discuss the protolith and tectonic significance of these serpentinites in the region. The studied rock samples are characterized by pseudomorphic textures, including mesh microstructure formed by serpentine intergrowths with cores of olivine, bastites after pyroxene. Antigorite constitutes almost the whole bulk of the rocks and is associated (to the less amount) with tremolite, talc, spinel, and magnetite. Whole-rock chemistry of the Eseka serpentinites led to the distinction of two types. Type 1 has high MgO (> 40 wt%) content and high Mg# values (88.80) whereas Type 2 serpentinite samples display relatively low MgO concentration and Mg# values (< 40 and 82.88 wt%, respectively). Both types have low Al/Si and high Mg/Si ratios than the primitive mantle, reflecting a refractory abyssal mantle peridotite protolith. Partial melting modeling indicates that these rocks were derived from melting of spinel peridotite before serpentinization. Bulk rock high-Ti content is similar to the values of subducted serpentinites (> 50 ppm). This similarity, associated with the high Cr contents, spinel-peridotite protolith compositions and Mg/Si and Al/Si ratios imply that the studied serpentinites were formed in a subduction-related environment. The U-shaped chondrite normalized-REE patterns of serpentinized peridotites, coupled with similar enrichments in LREE and HFSE, suggest the refertilized nature due to melt/rock interaction prior to serpentinization. Based on the results, we suggest that the Eseka serpentinized peridotites are mantle residues that suffered a high degree of partial melting in a subduction-related environment, especially in Supra Subduction Zone setting. These new findings suggest that the Nyong series in Cameroon represents an uncontested Paleoproterozoic suture zone between the Congo craton and the São Francisco craton in Brazil.