System parameters of soil foundations for time domain dynamic analysis

Soil-structure interaction analysis is usually carried out in the frequency domain, because the compliance functions of the half-space are known only in the frequency domain. Since non-linear analysis cannot be carried out in the frequency domain, a system with frequency independent parameters is used to represent the half-space soil medium so that a nonlinear analysis in the time domain becomes possible. The objective of this paper is to propose a system with lumped parameters, which are independent of frequency, to represent the half-space soil medium. The proposed frequency independent system consists of a number of real discrete structure elements; thus the existing dynamic analysis programs may be adoptable with little modification. In this paper, the parameters are found by minimizing the sum of the squares of deviations between the steady-state responses of the theoretical half-space model and those of the lumped parameter system over a specified frequency range. Once the parameters have been found, the lumped parameter system can be used in practical applications for time domain dynamic analysis of either linear or non-linear structures. In comparison with the dynamic response of the theoretical half-space model, the lumped parameter system yields satisfactory results.     

The impact of high altitude aircraft on the ozone layer in the stratosphere

The paper discusses the potential effects on the ozone layer of gases released by the engines of proposed high altitude supersonic aircraft. The major problem arises from the emissions of nitrogen oxides which have the potential to destroy significant quantities of ozone in the stratosphere. The magnitude of the perturbation is highly dependent on the cruise altitude of the aircraft. Furthermore, the depletion of ozone is substantially reduced when heterogeneous conversion of nitrogen oxides into nitric acid on sulfate aerosol particles is taken into account in the calculation. The sensitivity of the aerosol load on stratospheric ozone is investigated. First, the model indicates that the aerosol load induced by the SO₂ released by aircraft is increased by about 10–20% above the background aerosols at mid-high latitude of the Northern Hemisphere at 15 km for the NASA emission scenario A (the NASA emission scenarios are explained in Tables I to III). This increase in aerosol has small effects on stratospheric ozone. Second, when the aerosol load is increased following a volcanic eruption similar to the eruption of El Chichon (Mexico, April 1982), the ozone column in spring increases by as much as 9% in response to the injection of NO _x from the aircraft with the NASA emission scenario A. Finally, the modeled suggests that significant ozone depletion could result from the formation of additional polar stratospheric clouds produced by the injection of H₂O and HNO₃ by the aircraft engines.     

The LMDZ4 general circulation model: climate performance and sensitivity to parametrized physics with emphasis on tropical convection

The LMDZ4 general circulation model is the atmospheric component of the IPSL–CM4 coupled model which has been used to perform climate change simulations for the 4th IPCC assessment report. The main aspects of the model climatology (forced by observed sea surface temperature) are documented here, as well as the major improvements with respect to the previous versions, which mainly come form the parametrization of tropical convection. A methodology is proposed to help analyse the sensitivity of the tropical Hadley–Walker circulation to the parametrization of cumulus convection and clouds. The tropical circulation is characterized using scalar potentials associated with the horizontal wind and horizontal transport of geopotential (the Laplacian of which is proportional to the total vertical momentum in the atmospheric column). The effect of parametrized physics is analysed in a regime sorted framework using the vertical velocity at 500 hPa as a proxy for large scale vertical motion. Compared to Tiedtke’s convection scheme, used in previous versions, the Emanuel’s scheme improves the representation of the Hadley–Walker circulation, with a relatively stronger and deeper large scale vertical ascent over tropical continents, and suppresses the marked patterns of concentrated rainfall over oceans. Thanks to the regime sorted analyses, these differences are attributed to intrinsic differences in the vertical distribution of convective heating, and to the lack of self-inhibition by precipitating downdraughts in Tiedtke’s parametrization. Both the convection and cloud schemes are shown to control the relative importance of large scale convection over land and ocean, an important point for the behaviour of the coupled model.     

Laboratory study of the rates and products of the phototransformations of naphthalene adsorbed on samples of titanium dioxide,ferric oxide,muscovite, and fly ash

The photodegradation of naphthalene (NPH), chosen as a model of polynuclear aromatic pollutants, has been studied in the presence of a layer of four water-insoluble inorganic solids which can be found in the troposphere (TiO₂, Fe₂O₃, muscovite, and a fly ash sample). Direct photolysis of NPH is negligible at >340 nm. Dark adsorption of NPH on TiO₂ (mainly anatase, nonporous, 50 m² g^–1) at 293 K corresponds to a surface coverage ofca. 50% at equilibrium. Under these conditions (saturated surface), the stationary-state photocatalytic degradation reaches 0.4 molecule nm^–2 h^–1 (>340 nm, radiant fluxca. 22 mW cm^–2). Dioxygen is required and its partial pressure in air is such that the degradation is zero order in O₂. Water vapor markedly increases the rate. The other particulates have also an effect, less important than that of TiO₂, however quite noticeable with respect to surface area unit for the fly ash sample which contains 3.2% Fe₂O₃. Apart from 1,4-naphthoquinone, which is the main intermediate product in all cases, 2-naphthol, phthalide, phthaldialdehyde, phthalic acid, acetophenone, benzaldehyde, benzoic acid are also formed on dry TiO₂. Depending on their volatility, these compounds are transferred to the gas phase or remain principally adsorbed on the solid particles where they are further transformed. For instance, phthalic acid (or anhydride) and benzoic acid are generated from 1,4-naphthoquinone. Degradation mechanisms are briefly discussed.     

基于激光扫描和构造分析的紫云苗厅“双穹顶结构”成因机理初步研究

隶属于贵州格必（凸）河伏流洞穴系统的紫云苗厅,是世界上已知探明体积和表面积最大的洞厅,平面投影面积仅次于马来西亚的沙捞越大厅。2014年英国研究人员采用Riegl VZ-400三维激光扫描仪首次对整个苗厅进行了地面激光扫描,本研究通过激光扫描数据并结合地质构造背景分析,对苗厅基本形态特征及其控制因素获得了如下新认识：（1）苗厅整体由两个洞厅与一段大型廊道（极有可能是世界上跨度最大的洞穴廊道）共同构成,在形态上则是两个穹顶与一个拱顶相连接,总体呈“凹”字形。点云切片显示苗厅为鞍部（上部）水平截面呈两个独立又相互关联的多边形且底座并联的“双穹顶”特殊结构;（2）苗厅鞍部的多边形系多期地质构造错动所致,产生了不同方向、不同等级的断裂和节理体系,在区域内形成了具有格子状构造的格局,密集的裂隙交汇于苗厅使得溶蚀作用最为发育;（3）苗厅发育在交麻向斜核部下二叠厚层—块状石灰岩地层中,向斜底部的开张裂隙为地下水进入提供了良好的构造条件,是苗厅能发育成世界级巨大洞厅一个不可忽略的关键因素;（4）苗厅还存在上层洞道,与区域内的层状洞穴共同反映了地质历史时期构造抬升与河流下切的双重作用。推测早期有其它多股水流从高处共同汇聚于苗厅,共同掏蚀出巨大的地下空间,并经历了从潜流带到包气带的转换,才最终形成现今所见的宏大洞厅;（5）根据地貌形态与地质构造的关系,“双穹顶”的发育暗示了有利于形成超大地下洞厅的特殊地质构造也是相邻成对的。     

Three dimensional numerical simulation of residential building on shrink–swell soils in response to climatic conditions

Shrink–swell soils can cause distresses in buildings, and every year, the economic loss associated with this problem is huge. This paper presents a comprehensive system for simulating the soil–foundation–building system and its response to daily weather conditions. Weather data include rainfall, solar radiation, air temperature, relative humidity, and wind speed, all of which are readily available from a local weather station or the Internet. These data are used to determine simulation flux boundary conditions. Different methods are proposed to simulate different boundary conditions: bare soil, trees, and vegetation. A coupled hydro‐mechanical stress analysis is used to simulate the volume change of shrink–swell soils due to both mechanical stress and water content variations. Coupled hydro‐mechanical stress‐jointed elements are used to simulate the interaction between the soil and the slab, and general shell elements are used to simulate structural behavior. All the models are combined into one finite element program to predict the entire system's behavior. This paper first described the theory for the simulations. A site in Arlington, Texas, is then selected to demonstrate the application of the proposed system. Simulation results are shown, and a comparison between measured and predicted movements for four footings in Arlington, Texas, over a 2‐year period is presented. Finally, a three‐dimensional simulation is made for a virtual residential building on shrink–swell soils to identify the influence of various factors. Copyright © 2015 John Wiley & Sons, Ltd.     

A methodology for regionalizing 3‐D effective porosity at watershed scale in crystalline aquifers

An innovative approach for regionalizing the 3‐D effective porosity field is presented and applied to two large, overexploited, and deeply weathered crystalline aquifers located in southern India. The method derives from earlier work on regionalizing a 2‐D effective porosity field in that part of an aquifer where the water table fluctuates, which is now extended over the entire aquifer using a 3‐D approach. A method based on geological and geophysical surveys has also been developed for mapping the weathering profile layers (saprolite and fractured layers). The method for regionalizing 3‐D effective porosity combines water table fluctuation and groundwater budget techniques at various cell sizes with the use of satellite‐based data (for groundwater abstraction), the structure of the weathering profile, and geostatistical techniques. The approach is presented in detail for the Kudaliar watershed (983 km²) and tested on the 730 km² Anantapur watershed. At watershed scale, the effective porosity of the aquifer ranges from 0.5% to 2% in Kudaliar and between 0.3% and 1% in Anantapur, which agrees with earlier works. Results show that (a) depending on the geology and on the structure of the weathering profile, the vertical distribution of effective porosity can be very different and that the fractured layers in crystalline aquifers are not necessarily characterized by a rapid decrease in effective porosity and (b) that the lateral variations in effective porosity can be larger than the vertical ones. These variations suggest that within a same weathering profile, the density of open fractures and/or degree of weathering in the fractured zone may significantly vary from a place to another. The proposed method provides information on the spatial distribution of effective porosity that is of prime interest in terms of flux and contaminant transport in crystalline aquifers. Implications for mapping groundwater storage and scarcity are also discussed, which should help in improving groundwater resource management strategies.     

Modeling the 2D behavior of dry‐stone retaining walls by a fully discrete element method

The dry‐stone retaining walls (DSRW) have been tipped as a promising solution for sustainable development. However, before recently, their behavior is relatively obscure. In this study, discrete element method (DEM) approach was applied to simulate the plane strain failure of these walls. A commercial DEM package (PFC2D™) was used throughout this study. The authors used a fully discrete approach; thus, both the wall and the backfill were modeled as discrete elements. The methodology for obtaining the micromechanical parameters was discussed in detail; this includes the three mechanical sub‐systems of DSRWs: wall, backfill and interface. The models were loaded progressively until failure, and then the results were compared with the full‐scale experimental results where the walls were loaded, respectively, with hydrostatic load and backfill. Despite its complexity and its intensive calculation time, DEM model can then be used to validate a more simplified approach. Copyright © 2015 John Wiley & Sons, Ltd.