Présentation d'un capteur classeur de particules à lame unique et d'un capteur absolu permettant de l'étalonner

Résumé Dans le capteur monolame à un seul jet proposé ici, l'air est projeté obliquement sur la lame de verre en amont du jet; ce capteur permet ainsi d'obtenir un prélèvement de particules classées suivant leurs dimensions sur une grande surface d'une seule lame. Par ailleurs ce capteur, en plexiglas, permet de surveiller la lame en cours de prélèvement. Les coefficients de captation pour des gouttelettes de différentes dimensions ont été déterminés en comparant les prélèvements obtenus avec le capteur monolame à ceux obtenus avec un capteur à deux jets identiques en série, réalisé afin de permettre un comptage de toutes les gouttelettes déposées sur les parois intérieures. On a de la même façon déterminé les coefficients de captation d'un cascade impactor. Les coefficients du capteur monolame et du cascade impactor sont trouvés assez peu différents, et leurs valeurs restent comprises entre 40 et 86% pour des gouttelettes de 1 à 30 de rayon. Enfin un paragraphe de cette communication indique comment peut être utilisé le capteur monolame lors de prélèvements dans un nuage.

---

Summary In the monoslide and monojet impactor here proposed, the air is obliquely projected on the slide, up the jet; thus this impactor gives samples of particles classified according to their sizes on a large surface of only one slide. On another way, this impactor, made of plexiglas, allows the supervision of the slide during the sampling. The different size droplets sampling coefficients have been determined by comparison of samples obtained with an impactor having two identical jets in series, this impactor being realized in order to permit a counting of all the droplets settled in the interior walls. On the same way the sampling coefficients of a cascade impactor have been determined. The monoslide impactor coefficients and these of the cascade impactor have been found nearly identical and their values remain included between 40 and 86% for 1 to 30 radius droplets. Lastly a paragraph of this paper shows how the monoslide impactor can be used when sampling in a cloud.

     

Effect of particle density and inflow concentration of suspended sediment on bedload transport in rill flow

Laboratory flume experiments were carried out to evaluate the effect of particle density on bedload transport of sand‐sized particles and the effect of a suspended load of clay particles (kaolinite) on bedload transport of sand‐sized particles in rill flow conditions. Three materials in the range 400–600 µm were selected to simulate bedload transport of primary particles and aggregates: sand (2650 kg/m³), crushed brick (2450 kg/m³) and anthracite (1300–1700 kg/m³). In the two first experiments, two different methods were applied to determine bedload transport capacity of coarse particles for various conditions of flow discharge (from 2 to 15 L/min) and slope (2.2, 3 and 4%). In the third experiment, clear water was replaced with kaolinite–water mixture and bedload transport capacity of crushed brick particles was determined for a 4% slope and different concentrations of kaolinite (0, 7, 41 and 84 g/L). The results showed that bedload transport increased significantly with the decrease in particle density but the effect of particle density on transport rates was much less important than flow discharge. Velocity measurements of clear flow, flow mixed with coarse particles and coarse particles confirmed the existence of a differentiation between suspended load and bedload. In these experimental conditions, suspended load of kaolinite did not affect bedload rates of crushed brick particles. Three transport capacity formulae were tested against observed bedload rates. A calibration of the Foster formula revealed that the shear stress exponent should be greater than 1.5. The Low and the Govers unit stream power (USP) equations were then evaluated. The Low equation was preferred for the prediction of bedload rates of primary particles but it was not recommended in the case of aggregates of low density because of the limited experimental conditions applied to derive this equation. Copyright © 2008 John Wiley & Sons, Ltd.     

Effects of 12 years' operation of a sewage treatment plant on trace metal occurrence within a Mediterranean commercial sponge (Spongia officinalis, Demospongiae)

The present field study uses Spongia officinalis for assessing trace metals occurrence in time and space within Mediterranean rocky communities. Nine sites were selected in the Marseille area for studying spatial trends in 12 metal concentrations. Long term changes in 8 metal concentrations were assessed at sites that had been sampled before and 12 years after the opening of a treatment plant. Spongia officinalis highly concentrated all the trace metal surveyed excepted Hg and Cd. The overall contamination level registered provided a classification of the study sites which is congruent with that given by other studies on pollutant accumulation in neighbouring sandy-bottoms or benthic assemblages. Among the metals studied, Fe, Pb, Cr are those that best highlighted a pollution gradient. In the present study, only Cd concentration did not vary in space. Except for Ni, all pollutant concentrations clearly decreased between 1984 and 1999. This very impressive decrease in heavy metal concentrations within the Marseille area represents an indisputable evidence of the improvement of the seawater quality resulting from 12 years' operation of the Marseille sewage plant. Moreover, the significant decrease also recorded in the reference population at Port-Cros might reflect an overall improvement in the seawater quality of the NW Mediterranean.     

Estimating the error in vertically interpolated forecast‐observation differences: U‐ and v‐wind components

Abstract

Data assimilation in numerical weather forecasting corrects current forecast values by subtracting a portion of interpolated forecast‐minus‐observation differences at the points of a three‐dimensional grid. Deviations used in updating a forecast data field are forecast errors obtained or derived from observations available at update time. When observations are missing at mandatory levels, construction of full vertical soundings by interpolation introduces extraneous errors. The present paper is concerned with determination of the error in vertical extrapolations of surface winds, and of aircraft and satellite cloud‐tracked winds. In addition it examines the effect on accuracy of using location‐specific statistics compared to averaged statistics as the basis for the interpolation weighting scheme and compares errors of one‐ and two‐variable interpolations.

Interpolation accuracy tests demonstrate the influence of the interpolation scheme on the quality of interpolated information used in forecast updating. The results show that the level of accuracy exceeds the benchmark provided by monthly mean forecast error values only with bivariate interpolation of wind components from off‐level data sources.     

Carboxylic monoacids in the air of mayombe forest (Congo): Role of the forest as a source or sink

In the tropical rain forests of the Congo during the dry season, from June to September 1987, carboxylic acid partial pressures (P _gas) in the air above the canopy, at ground level, and at the boundary layer, were estimated from water samples such as fog and rainwater. The concentrations of these acids were also measured in the sap of tree leaves. Tree leaves act as a sink or as a source if the acid P _gas is greater of lower than the acid concentrations in molecular form in sap. For each of these soluble gases, there is a value of P _gas where the exchange is nul. This is called the compensation point. Values of the compensation point for some tree leaves were evaluated according to Henry's law. Henry's law coefficients at ppm levels were redetermined for formic (HCOOH), acetic (CH₃COOH), propionic (CH₃CH₂COOH), and isobutyric (CH₃CH(CH₃)COOH) acids.By comparison of P _gas and compensation points, it is concluded that the forest was a potential source for these acids. The soil-or the litter-acts as a significant source of a carboxylic acid of C₃ or C₄ atoms in the aliphatic chain. This carboxylic acid, not yet fully characterized, could play an important role in the rain acidity in forested zones of the equatorial areas.The direct emission of these carboxylic acids by vegetation was the main source in the boundary layer above the forest. The average emissions were 3.1×10⁹, 7.8×10⁹, and 8.4×10⁹ molecules cm^-2 s^-1 for HCOOH, CH₃COOH, and CH₃CH₂COOH, respectively. The savanna is an exogenous source of HCOOH and CH₃CH₂COOH during moderately rainy days for 30% of the time. The ozonolysis of isoprene seems to be a small source of HCOOH.     

Reconstructions of spring/summer precipitation for the Eastern Mediterranean from tree-ring widths and its connection to large-scale atmospheric circulation

This study represents the first large-scale systematic dendroclimatic sampling focused on developing chronologies from different species in the eastern Mediterranean region. Six reconstructions were developed from chronologies ranging in length from 115 years to 600 years. The first reconstruction (1885–2000) was derived from principal components (PCs) of 36 combined chronologies. The remaining five, 1800–2000, 1700–2000, 1600–2000, 1500–2000 and 1400–2000 were developed from PCs of 32, 18, 14, 9, and 7 chronologies, respectively. Calibration and verification statistics for the period 1931–2000 show good levels of skill for all reconstructions. The longest period of consecutive dry years, defined as those with less than 90% of the mean of the observed May–August precipitation, was 5 years (1591–1595) and occurred only once during the last 600 years. The longest reconstructed wet period was 5 years (1601–1605 and 1751–1755). No long term trends were found in May–August precipitation during the last few centuries. Regression maps are used to identify the influence of large-scale atmospheric circulation on regional precipitation. In general, tree-ring indices are influenced by May–August precipitation, which is driven by anomalous below (above) normal pressure at all atmospheric levels and by convection (subsidence) and small pressure gradients at sea level. These atmospheric conditions also control the anomaly surface air temperature distribution which indicates below (above) normal values in the southern regions and warmer (cooler) conditions north of around 40°N. A compositing technique is used to extract information on large-scale climate signals from extreme wet and dry summers for the second half of the twentieth century and an independent reconstruction over the last 237 years. Similar main modes of atmospheric patterns and surface air temperature distribution related to extreme dry and wet summers were identified both for the most recent 50 years and the last 237 years. Except for the last few decades, running correlation analyses between the major European-scale circulation patterns and eastern Mediteranean spring/summer precipitation over the last 237 years are non-stationary and insignificant, suggesting that local and/or sub-regional geographic factors and processes are important influences on tree-ring variability over the last few centuries.     

Geometry and kinematics of brittle deformation in the Central Cameroon Shear Zone (Kékem area): Implication for gold exploration within the Central Africa Fold Belt in Cameroon

The Central Africa Fold Belt (CAFB) is a collision belt endowed with gold deposits in Eastern Cameroon area mined for about 50 years. However, favorable areas for gold exploration are poorly known. This paper presents (1) the kinematics of the brittle deformation in the Kékem area in the SW portion of the Central Cameroon Shear Zone and (2) constraints gold mineralization events with respect to the collisional evolution of the CAFB. The authors interpret that the conjugate ENE to E and NNW to NW trending lineament corresponds to the synthetic (R) and the antithetic (R’) shears, which accompanied the dextral slip along the NE to ENE striking shear. The latter coincides with the last 570–552 Ma D₃ dextral simple shear-dominated transpression, which is parallel to the Bétaré Oya shear zone hosting gold deposits. Gold mineralizations, which mainly occurred during the last dextral shearing, are disseminated within quartz veins associated to Riedel’s previous structures reactivated due to late collisional activities of the CAFB as brittle deformation. Gold mineralizations occurred mainly during the 570–552 Ma D₃ event. The reactivation, which might be due to dextral simple shear during mylonitzation, plausibly remobilized the early gold deposits hosted in syn-compressional rocks and/or possibly focused deep-sourced fluid mixed with those released by dehydration. Therefore, the Central Cameroon Shear Zone where Kékem is located, and which shows similar petrographical and structural features to those controling Batouri gold district, is a target area for gold exploration in Cameroon.