Solar Photocatalytic Decolorization and Detoxification of Industrial Batik Dye Wastewater Using P(3HB)‐TiO2 Nanocomposite Films

Solar photocatalytic decolorization and detoxification of batik dye wastewater using titanium dioxide (TiO₂) immobilized on poly‐3‐hydroxybutyrate (P(3HB)) film was studied. The effects of initial dye concentration, catalyst concentration, P(3HB) film thickness, and fabrication methods of the nanocomposite films were evaluated against methylene blue, a standard organic dye. It was observed that 0.4 g of P(3HB)‐40 wt% TiO₂ removed 96% of the color under solar irradiation. P(3HB) and TiO₂, mixed concurrently in chloroform followed by stirring for 24 h showed a more even distribution of the photocatalyst on the polymer surface and yielded almost 100% color removal. The photocatalytic films were able to completely decolorize real industrial batik dye wastewater in 3 h and induced a chemical oxygen demand (COD) reduction of 80%. Reusability of the 0.4 g P(3HB)‐40 wt% TiO₂ film in decolorizing the batik dye wastewater was also possible as it gave a high consistent value of decolorization percentage (>80%) even after the sixth repeated usage. Recovery step of the photocatalysts was also not required in this simple treatment system. The decolorized batik dye wastewater had less/no toxic effects on mosquito larvae, Aedes aegypti, and microalgae, Scenedesmus quadricauda indicating simultaneous detoxification process along with the decolorization process.     

Pipe Service Age Effect on Chlorine Decay in Drinking‐Water Transmission and Distribution Systems

Maintaining acceptable quality of water transported in the transmission and distribution system requires the chlorination of water beyond the treatment plant. While flowing through pipes, the chlorine concentration decreases for different reasons. Reaction with the pipe material itself and the reaction with both the biofilm and tubercles formed on the pipe wall are known as pipe wall demand. This varies with pipe parameters. The aim of this paper was to assess the impact of the service age of pipes on the chlorine wall decay constant. One hundred and fifty three pipe sections of different sizes and four different pipe materials were collected and tested for their chlorine first‐order wall decay constants. The results showed that pipe service age was an important factor that must not be ignored. For the range of the 55 years of pipe service age used in this study, the change in the wall decay ranged from 8 to 531% of the corresponding values in the recently installed pipes. The effect of service age on the wall decay constants was most evident in steel pipes. Other important findings were reached.     

Effects of Oxbow Reconnection Based on the Distribution and Structure of Benthic Macroinvertebrates

This study focuses on the assessment of relationships between flow and macrozoobenthos structure that was performed in a reconnected oxbow lake located in the S?upia River floodplain (northern Poland). The lake was created during river straightening at the beginning of 20th century by cutting off the right‐bank meander. The oxbow restoration was performed to enhance the ecological viability of this water body and restore riverine wetland. In July 2000 the oxbow was connected with the river channel through PVC pipes which enabled free water movement. Macrozoobenthos sampling, as well as chemical analyses of water and hydrological measurements, took place both before and after the oxbow reconnection. Before the oxbow reconnection, the dominant species was Asellus aquaticus, whereas after the reconnection the structure of benthic species changed significantly. During the first year it was replaced by bivalves and Chironomidae larvae and then A. aquaticus. After the reconnection, macrozoobenthos mean density was 5‐fold higher and the mean wet biomass was 77‐fold higher than before the reconnection. The number of taxa increased from 4 before the oxbow reconnection to 17 during the first year after the performed works and 20 in the next year. We stated that the revitalization process of the reconnected oxbow lake has long‐term consequences for the benthic communities. The most significant feature of the oxbow reconnection is the qualitative and quantitative recolonization by riverine macrozoobenthos species. The performed restoration significantly improved ecological status of the oxbow lake by the increase in biodiversity and water quality.     

Petrogenetic modeling of rock variety in the Khalkhab–Neshveh pluton,NW of Saveh,Iran

The Khalkhab–Neshveh (KN) pluton is a part of Urumieh–Dokhtar Magmatic Arc and was intruded into a covering of basalt and andesite of Eocene to early Miocene age. It is a medium to high‐K, metaluminous and I‐type pluton ranging in composition from quartz monzogabbro, through quartz monzodiorite, granodiorite, and granite. The KN rocks show subtle differentiation trends strongly controlled by clinopyroxene, plagioclase, hornblende, apatite, and titanite, where most major elements (except K₂O) are negatively correlated with SiO₂; and Al₂O₃, Na₂O, Sr, Eu, and Y define curvilinear trends. Considering three processes of magmatic differentiation including mixing and/or mingling between basaltic and dacitic magmas, gravitational fractional crystallization and in situ crystallization revealed that the latter is the most likely process for the evolution of KN magma. This is supported by the occurrence of all rock types at the same level, the lack of mafic enclaves in the granitoid rocks, the curvilinear trends of Na₂O, Sr, and Eu, and the constant ratios of (⁸⁷Sr/⁸⁶Sr)_i from quartz monzodiorite to granite (0.70475 and 0.70471, respectively). In situ crystallization took place via accumulation of plagioclase and clinopyroxene phenocrysts and concentration of these phases in the quartz monzogabbro and quartz monzodiorite at the margins of the intrusion at T ≥ 1050°C, and by filter pressing and fractionation of hornblende, plagioclase, and later biotite in the granitoids at T = ～880°C.     

A call for standardization of aeolian process measurements: moving beyond relative case studies

Progress in some areas of process‐based aeolian sediment transport research is hampered by limited opportunities for data comparison, synthesis, and integration. This is partially due to a lack of reliable comparison methods. Many comparison methods are forms of calibration that are either restrictive (e.g., time‐averages only) or non‐existent (e.g., for field‐based sediment transport thresholds or vertical mass flux profiles). It is believed that the adoption of standard methods for common measurements may improve inter‐study comparison, add value and longevity to data, and advance integrative modeling efforts. Examples of approaches in allied disciplines where standards are used routinely are reviewed and we discuss how the mutual benefits of standardized data could outweigh perceived disadvantages. Overall, the goal of this commentary is to encourage discussion, self‐assessment, and forethought with regard to measurement methods used in process‐based aeolian geomorphology. Copyright © 2011 John Wiley & Sons, Ltd.     

Effect of hysteretic smoothness on inelastic response spectra with constant‐ductility

This paper presents an efficient methodology for computing constant‐ductility inelastic response spectra. The computation of constant‐ductility spectra involves numerical root‐finding algorithms to find the strongest structure providing a desired ductility response. Smooth inelastic structural behavior is modeled using a first‐order nonlinear differential equation and the transient structural response is solved using an implicit algorithm requiring Newton iterations at each time step. For structural models with smooth hysteretic behavior (not piece‐wise linear), a simple root‐finding method involving a combination of hyperbolic fits, linear interpolation, and Newton's method converges upon the highest strength (conservative) solution with a small number of iterations. The effect of the hysteretic smoothness on the occurrence of multiple roots is examined for two near‐fault and two far‐fault earthquake records, and for two measures of ductility and for normalized hysteretic energy. The results indicate how the smoothness of the hysteretic behavior affects ductility demand and constant‐ductility response spectra. Copyright © 2010 John Wiley & Sons, Ltd.     

Evaluating restoration of man‐made slopes: a threshold approach balancing vegetation and rill erosion

The management of reclaimed slopes derived from industrial and civil activities (e.g. surface mining and road construction) requires the development of practical stability analysis approaches that integrate the processes and mechanisms that rule the dynamics of these ubiquitous emerging ecosystems. This work describes a new modelling approach focused on stability analysis of water‐limited reclaimed slopes, where interactive relationships between rill erosion and vegetation regulate ecosystem stability. Our framework reproduces two main groups of possible trends along the temporal evolution of reclaimed slopes: successful trends, characterized by widespread vegetation development and the effective control of rill erosion processes; and gullying trends, characterized by the progressive loss of vegetation and a sharp logistic increase in erosion rates. Furthermore, this analytical approach allows the determination of threshold values for the state variables (i.e. vegetation cover and rill erosion) that drive the system's stability, facilitating the identification of critical situations that require specific human intervention (e.g. revegetation or, in very problematic cases, revegetation combined with rill network destruction) to ensure the long‐term sustainability of the restored ecosystem. The application of our threshold analysis framework in Mediterranean‐dry reclaimed slopes derived from surface coal mining (the Teruel coalfield in central‐eastern Spain) showed a good field‐based performance. Therefore, we believe that this model is a valuable contribution for the management of water‐limited reclaimed systems, including those associated with rill erosion, as it provides a tool for the evaluation of restoration success and can play an important role in decision‐making during ecosystem restoration in severely disturbed landscapes. Copyright © 2011 John Wiley & Sons, Ltd.     

Impact of subsurface rock fragments on runoff and interrill soil loss from cultivated soils

Field and laboratory studies have indicated that rock fragments in the topsoil may have a large impact on soil properties, soil quality, hydraulic, hydrological and erosion processes. In most studies, the rock fragments investigated still remain visible at the soil surface and only properties of these visible rock fragments are used for predicting runoff and soil loss. However, there are indications that rock fragments completely incorporated in the topsoil could also significantly influence the percolation and water distribution in stony soils and therefore, also infiltration, runoff and soil loss rates. Therefore, in this study interrill laboratory experiments with simulated rainfall for 60 min were conducted to assess the influence of subsurface rock fragments incorporated in a disturbed silt loam soil at different depths below the soil surface (i.e. 0.001, 0.01, 0.05 and 0.10 m), on infiltration, surface runoff and interrill erosion processes for small and large rock fragment sizes (i.e. mean diameter 0.04 and 0.20 m, respectively). Although only small differences in infiltration rate and runoff volume are observed between the soil without rock fragments (control) and the one with subsurface rock fragments, considerable differences in total interrill soil loss are observed between the control treatment and both contrasting rock fragments sizes. This is explained by a rapid increase in soil moisture in the areas above the rock fragments and therefore a decrease in topsoil cohesion compared with the control soil profile. The observed differences in runoff volume and interrill soil loss between the control plots and those with subsurface rock fragments is largest after a cumulative rainfall (P_cum) of 11 mm and progressively decreases with increasing P_cum. The results highlight the impacts and complexity of subsurface rock fragments on the production of runoff volume and soil loss and requires their inclusion in process‐based runoff and erosion models. Copyright © 2011 John Wiley & Sons, Ltd.     

Environmental health impacts of mobility and transport in Hai Phong, Vietnam

Traffic is an essential part of modern society and mobility is part of its socio-economic setting. However, signs of counter productivity arise as the current mobility patterns substantially affect our health, including the consequences from traffic accidents, air pollution—which causes even more victims than traffic accidents—and traffic-noise. The use of private motorised vehicles also contributes to sedentarism, climate change and psychological effects. This paper reviews these mobility related health effects and applies them to the situation in Hai Phong, a Vietnamese port-city in fast development and facing growing mobility patterns. In his Master Plan the city developed a view on its development together with the transportation infrastructure up to 2020. Together with the fast changing mobility patterns, such as a modal change from bicycles to motorcycles and cars, this lead to an increase in motorized vehicles and non-negligible environmental health risks. Applying the methodology of a Health Impact Assessment as used in previous studies the current health burden is estimated, focussing on particulate matter (PM) and noise. For PM₁₀ 1287 deaths per year were calculated for the current situation, where the estimated number of deaths by 2020 doubled up to 2741. Hospital admissions due to PM₁₀ raised from 44,954 now to 51,467 in 2020 and for PM_2.5 the restricted-activity days were calculated, accounting for 852,352 per year. For noise only calculations for the current state (2007) were performed. The total estimated DALYs due to noise was 4758.     

Integration of the life of field seismic data with the reservoir model at the Valhall Field‡

The frequent time‐lapse observations from the life of field seismic system across the Valhall field provide a wealth of information. The responses from the production and injection wells can be observed through time‐shift and amplitude changes. These observations can be compared to modelled synthetic seismic responses from a reservoir simulation model of the Valhall Field. The observed differences between the observations and the modelling are used to update and improve the history match of the reservoir model. The uncertainty of the resulting model is reduced and a more confident prediction of future reservoir performance is provided. A workflow is presented to convert the reservoir model to a synthetic seismic response and compare the results to the observed time‐lapse responses for any time range and area of interest. Correlation based match quality factors are calculated to quantify the visual differences. This match quality factor allows us to quantitatively compare alternative reservoir models to help identify the parameters that best match the seismic observations. Three different case studies are shown where this workflow has helped to reduce the uncertainty range associated with specific reservoir parameters. By updating various reservoir model parameters we have been able to improve the match to the observations and thereby improve the overall reservoir model predictability. The examples show positive results in a range of different reservoir modelling issues, which indicates the flexibility of this workflow and the ability to have an impact in most reservoir modelling challenges.