Temporal and bathymetric resolution of nautiloid death assemblages in stratigraphically condensed oozes (New Caledonia)

Cephalopod shells can be affected by postmortem transport and biostratigraphic condensation, but direct estimates of the temporal and spatial resolutions of cephalopod assemblages are missing. Amino acid racemisation calibrated by ¹⁴C demonstrates a centennial‐scale time averaging (<500 years) of Nautilus macromphalus in sediment‐starved, epi‐ and mesobathyal pelagic environments. The few shells that are thousands of years old are highly degraded. The median occurrence of dead shells is at 445 m depth, close to the 300–400 m depth where living N. macromphalus are most abundant. Therefore, dead shells of this species accumulate at a centennial temporal resolution and with excellent bathymetric fidelity. Dead Nautilus shells exist for only a few hundred years on the seafloor, in contrast to the biostratigraphically condensed mixture of extant foraminifers and foraminifers that went extinct during the Pleistocene. Cephalopod shells that do not show any signs of early diagenetic cementation are unlikely to be biostratigraphically condensed.     

Constraining Holocene 10Be production rates in Greenland

The absence of a production rate calibration experiment on Greenland has limited the ability to link ¹⁰Be exposure dating chronologies of ice‐margin change to independent records of rapid climate change. We use radiocarbon age control on Holocene glacial features near Jakobshavn Isbræ, western Greenland, to investigate ¹⁰Be production rates. The radiocarbon chronology is inconsistent with the ¹⁰Be age calculations based on the current globally averaged ¹⁰Be production rate calibration data set, but is consistent with the ¹⁰Be production rate calibration data set from north‐eastern North America, which includes a calibration site nearby on north‐eastern Baffin Island. Based on the best‐dated feature available from the Jakobshavn Isbræ forefield, we derive a ¹⁰Be production rate value of 3.98 ± 0.24 atoms g a^?1, using the ‘St’ scaling scheme, which overlaps with recently published reference ¹⁰Be production rates. We suggest that these ¹⁰Be production rate data, or the very similar data from north‐eastern North America, are used on Greenland. Copyright © 2011 John Wiley & Sons, Ltd.     

What has seismic missed?

The relative efficiencies of alternative geometric patterns of both discrete borehole and continuous grid line search have been extensively discussed in the mathematical geology literature. However, an equally important problem has received virtually no attention: How to use a sample of properties of geologic anomalies detected by grid line search of a region to estimate systematically both the number and size distribution of geologic anomalies missed by the search. We show how estimation methods developed in the sample survey design literature can be adapted to this problem, and we apply these methods to data describing 94 anomalies identified by a seismic reconnaissance survey.     

A Spatial Variant of the Basic Reproduction Number for the New Orleans Yellow Fever Epidemic of 1878

A spatial variant of the basic reproduction number (R₀), here defined as the number of subsequent deaths attributed to an initial mortality, can be used to identify geographic variation within an epidemic. A spatial R₀ was calculated at the neighborhood level, here defined by a 50‐m buffer surrounding an index case, for mortality data from the 1878 yellow fever epidemic of New Orleans. The highest number of secondary mortalities linked to a neighborhood index case was twelve, with a further eighty‐seven extrapolated morbidity cases. Results also highlight the importance of multideath residences and cultural contacts in neighborhood‐level disease spread.     

A spatial perspective for predicting enrollment in a regional pharmacy school

Having the ability to predict enrollment is an important task for any school’s recruiting team. The purpose of this study was to identify significant factors that can be used to predict the spatial distribution of enrollments. As a case study, we used East Tennessee State University (ETSU) pharmacy school, a regional pharmacy school located in the Appalachian Mountains. Through the application of a negative binomial regression model, we found that the most important indicators of enrollment volume for the ETSU pharmacy school were Euclidean distance, probability (based on competing pharmacy schools’ prestige, driving distance between schools and home and tuition costs), and the natural barrier of the Appalachian Mountains. Using these factors, together with other control variables, we successfully predicted the spatial distribution of enrollments for ETSU pharmacy school. Interestingly, gender also surfaced as a variable for predicting the pharmacy school’s enrollment. We found female students are more sensitive to the geographic proximity of home to school.     

Volcanoes of the Tibesti massif (Chad,northern Africa)

The Tibesti massif, one of the most prominent features of the Sahara desert, covers an area of some 100,000 km². Though largely absent from scientific inquiry for several decades, it is one of the world’s major volcanic provinces, and a key example of continental hot spot volcanism. The intense activity of the TVP began as early as the Oligocene, though the major products that mark its surface date from Lower Miocene to Quaternary (Furon (Geology of Africa. Oliver & Boyd, Edinburgh (trans 1963, orig French 1960), pp 1–377, 1963)); Gourgaud and Vincent (J Volcanol Geotherm Res 129:261–290, 2004). We present here a new and consistent analysis of each of the main components of the Tibesti Volcanic Province (TVP), based on examination of multispectral imagery and digital elevation data acquired from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER). Our synthesis of these individual surveys shows that the TVP is made up of several shield volcanoes (up to 80 km diameter) with large-scale calderas, extensive lava plateaux and flow fields, widespread tephra deposits, and a highly varied structural relief. We compare morphometric characteristics of the major TVP structures with other hot spot volcanoes (the Hawaiian Islands, the Galápagos Islands, the Canary and Cape Verdes archipelagos, Jebel Marra (western Sudan), and Martian volcanoes), and consider the implications of differing tectonic setting (continental versus oceanic), the thickness and velocity of the lithosphere, the relative sizes of main volcanic features (e.g. summit calderas, steep slopes at summit regions), and the extent and diversity of volcanic features. These comparisons reveal morphologic similarities between volcanism in the Tibesti, the Galápagos, and Western Sudan but also some distinct features of the TVP. Additionally, we find that a relatively haphazard spatial development of the TVP has occurred, with volcanism initially appearing in the Central TVP and subsequently migrating to both the Eastern and Western TVP regions. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

The physical volcanology of the 1600 eruption of Huaynaputina, southern Peru

Volcán Huaynaputina is a group of four vents located at 16°36'S, 70°51'W in southern Peru that produced one of the largest eruptions of historical times when ~11 km³ of magma was erupted during the period 19 February to 6 March 1600. The main eruptive vents are located at 4200 m within an erosion-modified amphitheater of a significantly older stratovolcano. The eruption proceeded in three stages. Stage I was an ~20-h sustained plinian eruption on 19-20 February that produced an extensive dacite pumice fall deposit (magma volume ~2.6 km³). Throughout medial-distal and distal parts of the dispersal area, a fine-grained plinian ashfall unit overlies the pumice fall deposit. This very widespread ash (magma volume ~6.2 km³) has been recognized in Antarctic ice cores. A short period of quiescence allowed local erosion of the uppermost stage-I deposits and was followed by renewed but intermittent explosive activity between 22 and 26 February (stage II). This activity resulted in intercalated pyroclastic flow and pumice fall deposits (~1 km³). The flow deposits are valley confined, whereas associated co-ignimbrite ash fall is found overlying the plinian ash deposit. Following another period of quiescence, vulcanian-type explosions of stage III commenced on 28 February and produced crudely bedded ash, lapilli, and bombs of dense dacite (~1 km³). Activity ceased on 6 March. Compositions erupted are predominantly high-K dacites with a phenocryst assemblage of plagioclase>hornblende>biotite>Fe-Ti oxides-apatite. Major elements are broadly similar in all three stages, but there are a few important differences. Stage-I pumice has less evolved glass compositions (~73% SiO₂), lower crystal contents (17-20%), lower density (1.0-1.3 g/cm³), and phase equilibria suggest higher temperature and volatile contents. Stage-II and stage-III juvenile clasts have more evolved glass (~76% SiO₂) compositions, higher crystal contents (25-35%), higher densities (up to 2.2 g/cm³), and lower temperature and volatile contents. All juvenile clasts show mineralogical evidence for thermal disequilibrium. Inflections on a plot of log thickness vs area^1/2 for the fall deposits suggest that the pumice fall and the plinian ash fall were dispersed under different conditions and may have been derived from different parts of the eruption column system. The ash appears to have been dispersed mainly from the uppermost parts of the umbrella cloud by upper-level winds, whereas the pumice fall may have been derived from the lower parts of the umbrella cloud and vertical part of the eruption column and transported by a lower-altitude wind field. Thickness half distances and clast half distances for the pumice fall deposit suggests a column neutral buoyancy height of 24-32 km and a total column height of 34-46 km. The estimated mass discharge rate for the ~20-h-long stage-I eruption is 2.4᎒⁸ kg/s and the volumetric discharge rate is ~3.6᎒⁵ m³/s. The pumice fall deposit has a dispersal index (Hildreth and Drake 1992) of 4.4, and its index of fragmentation is at least 89%, reflecting the dominant volume of fines produced. Of the 11 km³ total volume of dacite magma erupted in 1600, approximately 85% was evacuated during stage 1. The three main vents range in size from ~70 to ~400 m. Alignment of these vents and a late-stage dyke parallel to the NNW-SSE trend defined by older volcanics suggest that the eruption initiated along a fissure that developed along pre-existing weaknesses. During stage I this fissure evolved into a large flared vent, vent 2, with a diameter of approximately 400 m. This vent was active throughout stage II, at the end of which a dome was emplaced within it. During stage III this dome was eviscerated forming the youngest vent in the group, vent 3. A minor extra-amphitheater vent was produced during the final event of the eruptive sequence. Recharge may have induced magma to rise away from a deep zone of magma generation and storage. Subsequently, vesiculation in the rising magma batch, possibly enhanced by interaction with an ancient hydrothermal system, triggered and fueled the sustained Plinian eruption of stage I. A lower volatile content in the stage-II and stage-III magma led to transitional column behavior and pyroclastic flow generation in stage II. Continued magma uprise led to emplacement of a dome which was subsequently destroyed during stage III. No caldera collapse occurred because no shallow magma chamber developed beneath this volcano.     

Reevaluation of the lake-sediment chronology in the Dead Sea basin, Israel, based on new Th/U dates

The Dead Sea is surrounded by chemical and detrital sediments that were deposited in its larger precursor lakes, Lake Samra and Lake Lisan. The sedimentary history of these lakes was recon-structed by means of ²³⁰Th/²³⁴U ages of 30 samples, mostly of argonite laminae, from 8 columnar sections up to 110 km apart. The general validity of the ages was demonstrated by subjecting them to tests of internal isotopic consistency, agreement with stratigraphic order, and concordance with ¹⁴C ages. In the south, only the part of the Samra Formation older than 170,000 yr is exposed, while the aragonite-detritus rhythmites found in the central and northern region are generally younger than 120,000 yr. The Lisan Formation started accumulating about 63,000 yr B.P., with the clay and aragonite beds in the south-central area reflecting a rise in water level to at least −280 m. The upper part of the Lisan Formation, the aragonite-rich White Cliff Member, started accumulating about 36,000 yr B.P. The lake probably reached its highest level sometime after this, based on the ages of Lisan sediments preserved in the southernmost reaches of the basin.     

Wind-forced continental shelf waves from a geographical origin

The response of a barotropic coastal ocean on a step-shaped continental shelf to a traveling sinusoidal wind stress forcing is predicted theoretically using a frictional force proportional to the alongshore current velocity. This theory is compared to a small set of observations from the northeast coast of Australia where a sudden widening of the continental shelf provides a geographical origin. The comparison is accomplished by means of frequency response functions relating alongshore wind stress with alongshore velocity. Amplitudes of the response functions are predicted to increase with alongshore distance equatorward and also to decrease with frequency at any location. These predictions are verified by the measurements. Predicted phase lags are generally less than about 30°, with observations agreeing with theory to within about 20°C. In general, the measurements provide reasonable evidence to support the theory of wind-forced continental shelf waves from a geographical origin.     

Influence of vegetation change on watershed hydrology: implications for paleoclimatic interpretation of lacustrine δ18O records

Stratigraphic shifts in the oxygen isotopic (¹⁸O) and trace element (Mg and Sr) composition of biogenic carbonate from tropical lake sediment cores are often interpreted as a proxy record of the changing relation between evaporation and precipitation (E/P). Holocene ¹⁸O and Mg and Sr records from Lakes Salpetén and Petén Itzá, Guatemala were apparently affected by drainage basin vegetation changes that influenced watershed hydrology, thereby confounding paleoclimatic interpretations. Oxygen isotope values and trace element concentrations in the two lowland lakes were greatest between ~ 9000 and 6800 ¹⁴C-yr BP, suggesting relatively high E/P, but pollen data indicate moist conditions and extensive forest cover in the early Holocene. The discrepancy between pollen- and geochemically-inferred climate conditions may be reconciled if the high early Holocene ¹⁸O and trace element values were controlled principally by low surface runoff and groundwater flow to the lake, rather than high E/P. Dense forest cover in the early Holocene would have increased evapotranspiration and soil moisture storage, thereby reducing delivery of meteoric water to the lakes. Carbonate ¹⁸O and Mg and Sr decreased between 7200 and 3500 ¹⁴C-yr BP in Lake Salpetén and between 6800 and 5000 ¹⁴C-yr BP in Lake Petén Itzá. This decline coincided with palynologically documented forest loss that may have led to increased surface and groundwater flow to the lakes. In Lake Salpetén, minimum ¹⁸O values (i.e., high lake levels) occurred between 3500 and 1800 ¹⁴C-yr BP. Relatively high lake levels were confirmed by ¹⁴C-dated aquatic gastropods from subaerial soil profiles ~ 1.0–7.5 m above present lake stage. High lake levels were a consequence of lower E/P and/or greater surface runoff and groundwater inflow caused by human-induced deforestation.