Quantifying fracture geometry with X-ray tomography: Technique of Iterative Local Thresholding (TILT) for 3D image segmentation

This paper presents a new method—the Technique of Iterative Local Thresholding (TILT)—for processing 3D X-ray computed tomography (xCT) images for visualization and quantification of rock fractures. The TILT method includes the following advancements. First, custom masks are generated by a fracture-dilation procedure, which significantly amplifies the fracture signal on the intensity histogram used for local thresholding. Second, TILT is particularly well suited for fracture characterization in granular rocks because the multi-scale Hessian fracture (MHF) filter has been incorporated to distinguish fractures from pores in the rock matrix. Third, TILT wraps the thresholding and fracture isolation steps in an optimized iterative routine for binary segmentation, minimizing human intervention and enabling automated processing of large 3D datasets. As an illustrative example, we applied TILT to 3D xCT images of reacted and unreacted fractured limestone cores. Other segmentation methods were also applied to provide insights regarding variability in image processing. The results show that TILT significantly enhanced separability of grayscale intensities, outperformed the other methods in automation, and was successful in isolating fractures from the porous rock matrix. Because the other methods are more likely to misclassify fracture edges as void and/or have limited capacity in distinguishing fractures from pores, those methods estimated larger fracture volumes (up to 80 %), surface areas (up to 60 %), and roughness (up to a factor of 2). These differences in fracture geometry would lead to significant disparities in hydraulic permeability predictions, as determined by 2D flow simulations.     

Assessment of small-diameter shallow wells for managed aquifer recharge at a site in southern Styria,Austria

An approach to establish the recharge component of managed aquifer recharge (MAR) has recently been proposed that uses small-diameter shallow wells installed using relatively inexpensive drilling methods such as direct push. As part of further development of that approach, a generalized procedure is presented for a technical and economic assessment of the approach’s potential in comparison to other systems. Following this procedure, the use of small-diameter wells was evaluated both experimentally and numerically for a site located in southern Styria, Austria. MAR is currently done at the site using a horizontal pipe infiltration system, and system expansion has been proposed with a target rate of 12 l/s using small-diameter wells as one possible option. A short-duration single-well field recharge experiment (recharge rate 1.3–3.5 l/s) was performed (recharge by gravity only). Numerical modeling of the injection test was used to estimate hydraulic conductivity (K). Quasi-steady-state, single-well recharge simulations for different locations, as well as a long-term transient simulation, were performed using the K value calibrated from the field injection test. Results indicate that a recharge capacity of 4.1 l/s was achievable with a maximum head rise of 0.2 m at the injection well. Finally, simulations were performed for three different well fields (4, 6 and 8 wells, respectively) designed to infiltrate a target rate of 12 l/s. The experimental and numerical assessments, supported by a cost analysis of the small-diameter wells, indicate that the small-diameter wells are a viable, cost-effective recharge approach at this and other similar sites.     

Genesis of tuff interval and its uranium enrichment in Upper Triassic of Ordos Basin,NW China

Recently measured high gamma ray values in the Yanchang Formation of the Upper Triassic in the Ordos Basin have added an interesting and controversial twist to the study of the formation’s uranium enrichment and genesis. High uranium and thorium contents in the tuffaceous layer cause high gamma ray values in the Yanchang Formation. Petrographic studies, major elements, rare earth elements (REEs), and trace elements have been systematically analyzed to determine the composition, geochemical environment, and diagenetic processes of the layer. The observed color of the tuffaceous layer in the study area varies from yellow to yellowish brown. The tuff consists of matrix supported with sub-rounded to sub-angular lithic fragments. These lithic fragments probably derived from pre-existing rocks and incorporated into the tuffaceous layer during volcanic eruption. Quartz, plagioclase, and biotite were observed in well to poorly sorted form, in addition to framboidal pyrite and organic laminae. Measured ratios of SiO₂/Al₂O₃ ranged from 3.277 to 6.105 with an average of 3.738. The ratio of TiO₂/Al₂O₃ varied from 0.037 to 0.201 with an average of 0.061, indicating that the sediments of the tuffaceous layer originated from an intermediate magma. REE distribution patterns show sharp negative Eu anomalies, indicating a reducing environment, which is suitable for uranium deposition. A reducing environment was confirmed by black shale in the base of the Yanchang Formation. Such black shale has high organic matter content that can take kerogene from mudstone and provide a reducing environment for uranium enrichment in the tuffaceous layer. Moreover, negative Eu anomalies and the REE patterns indicate a subduction-related volcanic arc environment as the magma source of the tuffaceous layers. High values of Rb, Ba, and Sr might be the result of fluid phase activities; low values of Hf and Eu indicate the involvement of crustal material during diagenesis of the tuff. Discrimination diagrams (Th/Yb vs Ta/Yb, Th/Hf vs Ta/Hf) suggest an active continental margin as the tectonic setting of source volcanoes. Plots of Nb versus Y, Rb versus Y + Nb, TiO₂ versus Zr, and Th/Yb versus Nb/Yb of the tuffaceous content point to calc-alkaline continental arc-related magmatism. We concluded that uranium enrichment in the tuffaceous layer was supported by oxidation–reduction.     

Vulnerability and fate of a coastal sand dune complex,Rosetta-Idku,northwestern Nile Delta,Egypt

Types, distribution, and origin of recent sand dunes between Rosetta and Idku, in the western sector of the Nile Delta, Egypt were investigated. Sand samples from the dunes, beach, and seafloor were studied for grain size distribution and mineralogical composition. It has been found that most of the dunes in the study area have been subjected to deterioration and removal due to the construction of buildings and the International Coastal Highway. The remnant constitutes a damaged belt of foredunes that extends from El Bouseily village to the west of Idku town. The dune’s origin is interpreted to be the result of coastal drifting and the subsequent transport of sediments of the former Canopic Nile branch eastward by the predominant longshore current and by aeolian processes. The blown sand grains accumulated to form a belt of coastal sand dunes of original longitudinal and crescentic forms. Urbanization of the coast has severely altered the landscape. The study area is considered vulnerable to the impacts of climate change and the expected rise in sea level. The outcome of potential sea level rise is serious; erosion problems are expected to be exacerbated and vast areas from land and property would be lost. Thus, protection and preservation the remaining dunes in the study area are vital requirements for shore protection.     

<Superscript>226</Superscript>Ra, <Superscript>232</Superscript>Th and <Superscript>40</Superscript>K activities in soils of Cuihua Mountain National Geological Park,China

Gamma activity from the naturally occurring radionuclides namely, ²²⁶Ra, ²³²Th, the primordial radionuclide ⁴⁰K was measured in the soil of Cuihua Mountain National Geological Park, China using γ-ray spectrometry technique. The mean activity of ²²⁶Ra, ²³²Th and ⁴⁰K were found to be 27.2 ± 6.5, 43.9 ± 6.2 and 653.1 ± 127.6 Bq kg⁻¹, respectively. The concentrations of these radionuclides were compared with the typical world values and the average activities of Chinese soil. The radium equivalent activity, the air absorbed dose rate, the annual effective dose rate, and the external hazard index were evaluated and compared with the internationally approved values. All the soil samples have Ra_eq lower than the limit of 370 Bq kg⁻¹ and H _ex less than unity. The overall mean outdoor terrestrial gamma dose rate is 66.3 nGy h⁻¹ and the corresponding outdoor annual effective dose is 0.081 mSv.     

Potential for localized groundwater contamination in a porous pavement parking lot setting in Rhode Island

The control of polluted surface runoff and the assessment of possible impacts on groundwater is a concern at the local and regional scale. On this background, a study investigates possible impacts of organic and inorganic pollutants (including bacteria) originating from a permeable asphalt parking lot on the water quality immediately beneath it. The functioning of the permeable pavement, including clogging and restricted vertical percolation, was also evaluated. Four nested sample ports (shallow and deep) were installed below low- and high-traffic areas, including one port outside the parking lot. At least initially there was a good hydraulic connection between the parking surface and the shallow sample ports. The presence of a geotextile layer at the base of the parking lot structure, however, was identified in lab tests as one factor restricting vertical percolation to the deeper ports. Clogging of the permeable surface was most pronounced in heavy traffic areas and below snow pile storage areas. Corroborated by high electric conductivity and chloride measurements, sand brought in by cars during winter was the principal cause for clogging. No bacteria or BOD were found in percolating water. Polycyclic aromatic hydrocarbons (PAH) were present at concentrations near minimum detection limit. Nutrients (nitrate and phosphate) were being leached into the ground via the permeable parking lot surface at annual flux rates of 0.45–0.84 g/m²/year. A multi-species tracer test demonstrated a retention capacity of the permeable parking lot structure of >90% for metals and 27% for nutrients, respectively.     

Fractal-like adsorption kinetics of Pb^2＋ in rocks

The adsorption kinetics of Pb^2＋ in rocks has been studied using ion selective electrodes and atomic absorption spectrophotometer. The results showed that the adsorption process is a fractal-like reaction. The adsorption rate was relatively high before 30 minutes, and then dropped. The saturated adsorption capacity （a） of Pb^2＋ and kinetic parameters （b, a, D and k） increased with increasing initial concentrations of Pb^2＋. These parameters （except a） decreased while Na^＋ was present in the solution. Furthermore, the smaller the rocks were in grain size, the bigger these kinetic parameters would be, though the parameter a was almost constant.     

Suitability analysis for sand and gravel extraction site location in the context of a sustainable development in the surroundings of Zaragoza (Spain)

Zaragoza city is located in the central Ebro Basin, in the Iberian Peninsula. The fluvial terraces formed by the Ebro River present a valuable resource of sand and gravel deposits. However, taking advantage of these available resources implies conflicts with other land use interests like urban and industrial development as well as agricultural use, which has also traditionally occupied the alluvial terraces. These deposits represent a substantial groundwater resource that should be preserved for future generations. The development of spatial decision support systems (SDSS) has greatly assisted efforts for solving land-use conflicts. These systems combine the benefits of geographic information systems (GIS) and decision support methodologies and are therefore suitable to manage sustainable development of urban areas. In this contribution, an extraction suitability map taking into consideration a variety of environmental criteria is created with the help of a SDSS. The method used is the analytical hierarchy process which is integrated in ArcGIS. Areas most suitable to sand and gravel extraction are located in the high terraces, and in those terraces covered by pediments where the thickness of resource is relatively high. These areas are far from valuable natural areas, outside areas most vulnerable to groundwater contamination, and beneath soils with poor irrigation characteristics.     

2-D deformation analysis of a half-space due to a long dip-slip fault at finite depth

Closed form analytical expressions of stresses and displacements at any field point due to a very long dip-slip fault of finite width buried in a homogeneous, isotropic elastic half-space, are presented. Airy stress function is used to derive the expressions of stresses and displacements which depend on the dip angle and depth of the upper edge of the fault. The effect of dip angle and depth of the upper edge of the fault on stresses and displacements is studied numerically and the results obtained are presented graphically. Contour maps for stresses and displacements are also presented. The results of Rani and Singh (1992b) and Freund and Barnett (1976) have been reproduced.     

SIMULATION AND PREDICTION OF DEBRIS FLOW USING ARTIFICIAL NEURAL NETWORK

Debris flow is one of the most destructive phenomena of natural hazards. Recently, major natural haz-ard, claiming human lives and assets, is due to debris flow in the world. Several practical methods for forecasting de-bris flow have been proposed, however, the accuracy of these methods is not high enough for practical use because of the stochastic and non-linear characteristics of debris flow. Artificial neural network has proven to be feasible and use-fill in developing models for nonlinear systems. On the other hand, predicting the future behavior based on a time se-ries of collected historical data is also an important tool in many scientific applications. In this study we present a three-layer feed-forward neural network model to forecast surge of debris flow according to the time series data collect-ed in the Jiangjia Ravine, situated in north part of Yunnan Province of China. The simulation and prediction of debris flow using the proposed approach shows this model is feasible, however, further studies are needed.