Sea-Breeze Modification Of The Growth Of A Marine Internal Boundary Layer

A numerical mesoscale model is used to make a high-resolutionsimulation of the marine boundary layer in the Persian Gulf, duringconditions of offshore flow from Saudi Arabia. A marine internal boundary layer(MIBL) and a sea-breeze circulation (SBC) are found to co-exist. The sea breeze develops in the mid-afternoon, at which time its frontis displaced several tens of kilometres offshore. Between the coastand the sea-breeze system, the MIBL that occurs is consistent with a picture described in the existing literature. However, the MIBL isperturbed by the SBC, the boundary layer deepening significantly seaward of the sea-breeze front. Our analysis suggests that thisstrong, localized deepening is not a direct consequence offrontal uplift, but rather that the immediate cause is the retardation of theprevailing, low-level offshore windby the SBC. The simulated boundary-layer development can be accounted for by using a simple 1D Lagrangian model of growth driven by the surface heatflux. This model is obtained as a straightforward modification ofan established MIBL analytic growth model.     

The effect of grain texture on the occurrence of microstructural properties in subglacial till

In this paper, we examine whether till grain size affects the range and occurrence of micromorphological features associated with subglacial shear. Our till samples were collected from two glaciers in Iceland, and varied in texture from a coarse, sandy clast-rich till (Fjallsjökull) to a fine-grained silty-sandy till (Vestari-Hagafellsjökull). We found a wide range of deformational microstructures that included skelsepic plasmic fabric, intraclasts of pre-existing eroded bedrock (basalt) and weathered clay and ‘mini-shear zones’ between clasts. We classified our micromorphological data into three classes; rotational, intermediate and linear. In addition to these observations, we performed extensive microfabric analysis at different scales on all of our samples. We found that the coarse-grained till contained a greater number and variety of microstructures than the fine-grained till. In addition, the fine-grained till showed a distinct lack of rotational structures that we attribute to the lack of significantly sized clasts in the matrix. We argue that the varied texture of the coarse-grained till provides a greater degree of perturbation within the shearing layer and so more distinct microstructures form. In a more fine-grained till, shearing is more homogeneous since there are less perturbations in the matrix and this leads to a more singular kind of microstructure. Our observations suggest that subglacial shear occurs within a multi-layered patchwork of different grain sizes, competence and pore water pressures. It is these factors that are so crucial in determining the occurrence and type of microstructural evidence we see in subglacial tills.     

Explaining complexities of environmental management in developing countries: lessons from the Fiji Islands

Development assistance agencies have long urged developing countries to adopt environmental management techniques used in industrialized countries. They have ascribed shortcomings in the way developing states use those techniques to insufficient training, environmental matters being poorly integrated into economic decision making, other institutional weaknesses and lack of capacity. These reductionist explanations ignore the influence that socio-political and economic factors may have on state environmental management. They afford only a limited understanding of environmental practice in the Fiji Islands, a South Pacific archipelago and republic. The attempts of Fijian chiefly élite to maintain their power base – achieved through political participation in the state and economic development activities as much as through maintaining the communal system – shape the state's environmental management practices. Those practices have far less rational and democratic bases than one would expect either from the underlying logic of the techniques used (such as environmental impact assessment, environmental planning and protected areas), or from the way those techniques are applied in western, industrialized countries.     

Photogrammetric recording of the Roman earthworks 'Cawthorn camps', north yorkshire

Cawthorn Camps is a Roman site of probable late 1st and early 2nd century date comprising two forts, one with a later annexe, and a camp. The site survives as earthworks and, within the main defences, there are many slight embanked structures. The current multidisciplinary programme of research has included geophysical prospection, excavation, ground and aerial survey; it is a joint initiative by the North York Moors National Park Authority and English Heritage. The project aims to increase academic understanding, improve information available to the public and assist the production of a revised management plan for this nationally important site.
Large-scale air photographs and digital photogrammetry have been used to produce a plan, at scale 1:500, of the earthworks to a precision of ±10 cm. This plan has been used as a base map with which to rectify other key photographs and plans allowing further detailed interpretation and mapping to be undertaken. The air photographic work has also investigated some of the products available through digital photogrammetric technology, such as digital elevation models (DEMs), orthophotographs and perspective views.     

Delineation of the distinctive nature of tertiary coal beds

Floral character in mires has changed progressively through time. In the Carboniferous, pteridophytes, sphenophytes and lycophytes were dominant but by the Permian gymnosperms were an important component of mire flora. During the early Mesozoic gymnosperms remained the characteristic mire vegetation, together with pteridophytes, and conifers became dominant during the Jurassic. Cretaceous and Paleocene vegetation are similar, with taxodiaceous flora being important in mire vegetation. From the Eocene onwards, however, angiosperms were increasingly dominant in mire communities and in the Miocene herbaceous vegetation began to play a significant role. Together with these changes in floral character at least three aspects of coal character also appear to vary sequentially with time and are distinctive in the Tertiary: (1) proportions and thickness of vitrain banding, (2) coal bed thickness and (3) proportions of carbonised material. A compilation has been made of data from the coal literature comparing older coals with those of the Tertiary, in order to give a perspective in which to examine Tertiary coals. It was found that only Tertiary coals contain significant proportions of coal devoid of vitrain bands. In addition, Tertiary coals are the thickest recorded coal beds and generally contain low percentages of carbonised material (many less than 5%) as compared to older coals. It is interesting to note that Paleocene coal beds are similar to Cretaceous coals in that they tend to be thinner and contain higher proportions of carbonised material than do younger Tertiary coals.The absence of vitrain bands in some Tertiary coal beds is thought to result from the floras dominated by angiosperms, which are relatively easily degraded as compared to gymnosperms. The thickness of Tertiary coals may be related to an increase in biomass production from the Carboniferous through to the Tertiary, as plants made less investment in producing lignin, an energy-intensive process. In addition, with less lignin in plants, easier degradation of biomass may have facilitated nutrient recycling which, in turn, led to greater biomass production. Increased biomass production may have also ‘diluted’ the carbonised material present in some Tertiary peats, leading to lower proportions in the coal. Another possible cause of decreased carbonised components in Tertiary coal is that decreasing lignin content resulted in decreased charring during fires, as lignin is particularly prone to charring. A third possibility is that the carbonised component of peat may be concentrated during coalification so that Tertiary coals, generally of lower rank than Mesozoic or Paleozoic coals, contain a smaller fraction of carbonised plant material. It is not at present clear which of these mechanisms may have affected carbonised material in peat and coal but it is clear that lignin type and content has had an important role in determining peat and coal character since the Paleozoic.     

Changes in seasonal water transport in a Louisiana estuary,Fourleague Bay,Louisiana

Water transport in Fourleague Bay is strongly influenced by the discharge of the Atchafalaya River and prevailing wind conditions. In three 50-h intensive surveys, we measured transport through the major inlets of the bay during the three major river discharge/weather regimes of the year: strong frontal passage, high river flow, and calm, low river flow. Wind stress caused significant changes in both transport and water levels. North winds, dominant during winter frontal passages, caused a net export of water. During the high river flow survey, southeasterly winds created an opposing hydraulic pressure gradient in the Gulf of Mexico, diverting river flow into Fourleague Bay. This resulted in an increase in water elevation and the inundation of adjacent marshes. We believe that this high-discharge, southerly wind condition is the major mechanism leading to sheet flow and sedimentation on the marsh. Calm, low-discharge conditions, typical of late summer, produced classic tidally-dominated circulation.     

Till fabric associated with deformable beds

This paper investigates the development of till fabric associated with glaciers overlying deformable beds. First, the till fabrics from both modern and ancient, soft bed and hard bed subglacial environments are investigated, and then soft bedded sites with specific strain histories are examined. The results indicate that lodgement tills had a strong fabric, whilst there is a wide range of much weaker fabric strengths associated with soft bed tills. It is suggested from a theoretical study of soft bed till deposition that longitudinal and vertical processes in the subglacial deforming layer are important in fabric development. Field sites were chosen to isolate these two factors, and fabrics investigated in areas of known relative shear strain, and known relative thickness of the deforming layer. The results indicate that: (1) for a fixed deforming layer, fabric strength does increase with increasing deformation (except at very high strains where the development of a transverse fabric can lead to a reduction in the overall fabric strain); and (2) lodgement tills and soft bed tills associated with a thin deforming layer have a high fabric strength, whilst soft bed tills associated with a thick deforming layer have a low fabric strength. Where the deforming layer is thin, clasts are oriented parallel with the glacier direction either by lodging against a hard bed or ploughing against a soft bed. However, where the deforming layer is thicker and shear strains are high, melt-out processes encourage a parallel fabric, but the increased shear strain and changes in the deforming layer thickness cause the clasts to develop both a parallel and transverse fabric. These processes combine to reduce the overall fabric strength. Till fabric studies are a further sedimentological technique to separate the depositional processes associated with a homogeneous till.     

Fluid heterogeneities and hornblende stability in interlayered graphitic and nongraphitic schists (Tauern Window,Eastern Alps)

The assemblage hornblende+white mica occurs in graphite-free schists at two localities in the southwest corner of the Tauern Window, Eastern Alps. In interbedded graphitic layers (1 mm to 1 m thick), however, hornblende is typically replaced by pseudomorphs of biotite+plagioclase +epidote±chlorite+staurolite in the presence of white mica. Garnets adjacent to these pseudomorphs have pronounced growth discontinuities near their rims, in contrast to the continuously zoned garnets in nongraphitic layers. These observations imply that reactions of the type hbl+white micagar+bio+plag+epid±chl±staur +H₂O occurred in the graphitic samples, but that hbl+white mica remained stable in graphite-free layers.Calculation of the equilibrium constants for solid phases in five dehydration equilibria at locality 1 indicates thata(H₂O) in the nongraphitic layers was 6 to 11 times greater thana(H₂O) in the graphitic layers. Similar calculations involving six dehydration equilibria at locality 2 show no difference ina(H₂O) between layers at the conditions of final equilibration. Initial differences in fluid composition maintained between the graphitic and nongraphitic layers caused the hbl+white mica reaction to occur at differentP-T conditions in different horizons of the schists.These data indicate that systematic differences in fluid composition were generated during metamorphism of the interlayered graphitic and non-graphitic schists but were subsequently homogenized at locality 2. The heterogeneities could initially have been produced while the rocks were in theP-T field of CO₂-H₂O immiscibility. Development of a penetrative, layer-parallel shear foliation at this time would have prevented subsequent mixing of the fluids across layers after temperatures exceeded the consolute temperature in the CO₂-H₂O system. Late-stage homogenization of fluids at locality 2 is thought to reflect loss of the buffer capacity of the mineral assemblage in response to total consumption of hornblende.     

Mineralogical changes occurring during the retrogression of Archaean gneisses from the Lewisian complex of NW Scotland

Gneisses, metamorphosed at granulite facies ca 2.7 Ga, were subsequently retrogressed to amphibolite facies during a prolonged period of retrogression, perhaps lasting as long as 200 m.y. The Scourie dykes were emplaced towards the end of this event. Localised Laxfordian shear zones further modified the mineral assemblages. The retrogression caused the production of a uniform $\text{plagioclase-hornblende}\text{- ±}\text{quartz}\text{±}\text{biotite}$ assemblage. A study of hornblende composition shows that it depends on metamorphic grade, host rock composition and paragenesis. The sequence of mineral assemblages suggests that retrogression took place on a falling temperature path, beginning at about $\text{650±50°}\text{C}$. Post-tectonic muscovite indicates that temperatures were still in excess of 500°C after the formation of Laxfordian shear zones. This indicates that the Lewisian complex was uplifted and cooled extremely slowly.