Reformulated O correction of mass spectrometric stable isotope measurements in carbon dioxide and a critical appraisal of historic ‘absolute’ carbon and oxygen isotope ratios

Mass-spectrometric stable isotope measurements of CO₂ use molecular ion currents at mass-to-charge ratios m/z 44, 45 and 46 to derive the elemental isotope ratios n(¹³C)/n(¹²C) and n(¹⁸O)/n(¹⁶O), abbreviated ¹³C/¹²C and ¹⁸O/¹⁶O, relative to a reference. The ion currents have to be corrected for the contribution of ¹⁷O-bearing isotopologues, the so-called ‘¹⁷O correction’. The magnitude of this correction depends on the calibrated isotope ratios of the reference. Isotope ratio calibrations are difficult and are therefore a matter of debate. Here, I provide a comprehensive evaluation of the existing ¹³C/¹²C (¹³R), ¹⁷O/¹⁶O (¹⁷R) and ¹⁸O/¹⁶O (¹⁸R) calibrations of the reference material Vienna Standard Mean Ocean Water (VSMOW) and CO₂ generated from the reference material Vienna Pee Dee Belemnite (VPDB) by reaction with 100% H₃PO₄ at 25 °C (VPDB-CO₂). I find , ¹⁸R_VSMOW/10⁻⁶ = 2005.20 ± 0.45, ¹³R_VPDB-CO2/10^-6= 11124 ± 45, and ¹⁸R_VPDB-CO2/10^-6=2088.37±0.90. I also rephrase the calculation scheme for the ¹⁷O correction completely in terms of relative isotope ratio differences (δ values). This reveals that only ratios of isotope ratios (namely, ¹⁷R/¹³R and ¹³R¹⁷R/¹⁸R) are required for the ¹⁷O correction. These can be, and have been, measured on conventional stable isotope mass spectrometers. I then show that the remaining error for these ratios of isotope ratios can lead to significant uncertainty in the derived relative ¹³C/¹²C difference, but not for¹⁸O/¹⁶O. Even though inter-laboratory differences can be corrected for by a common ‘ratio assumption set’ and/or normalisation, the ultimate accuracy of the ¹⁷O correction is hereby limited. Errors of similar magnitude can be introduced by the assumed mass-dependent relationship between ¹⁷O/¹⁶O and ¹⁸O/¹⁶O isotope ratios. For highest accuracy in the ¹³C/¹²C ratio, independent triple oxygen isotope measurements are required. Finally, I propose an experiment that allows direct measurement of ¹³R¹⁷R/¹⁸R.     

Surface complexation effects on phosphate adsorption to ferric iron oxyhydroxides along pH and salinity gradients in estuaries and coastal aquifers

Non-conservative behavior of dissolved inorganic phosphate (DIP) in estuaries is generally ascribed to desorption from iron and aluminum (hydr)oxides with increasing salinity. Here, we assess this hypothesis by simulating the reversible adsorption of phosphate onto a model oxide (goethite) along physico-chemical gradients representative of surface and subsurface estuaries. The simulations are carried out using a surface complexation model (SCM), which represents the main aqueous speciation and adsorption reactions of DIP, plus the ionic strength-dependent coulombic interactions in solution and at the mineral-solution interface. According to the model calculations, variations in pH and salinity alone are unlikely to explain the often reported production of DIP in surface estuaries. In particular, increased aqueous complexation of phosphate by Mg²⁺ and Ca²⁺ ions with increasing salinity is offset by the formation of ternary Mg-phosphate surface complexes and the drop in electrical potential at the mineral-water interface. However, when taking into account the downstream decrease in the abundance of sorption sites, the model correctly simulates the observed release of DIP in the Scheldt estuary. The sharp increase in pH accompanying the admixing of seawater to fresh groundwater should also cause desorption of phosphate from iron oxyhydroxides during seawater intrusion in coastal aquifers. As for surface estuaries, the model calculations indicate that significant DIP release additionally requires a reduction in the phosphate sorption site density. In anoxic aquifers, this can result from the supply of seawater sulfate and the subsequent reductive dissolution of iron oxyhydroxides coupled to microbial sulfate reduction.     

Leaching mechanisms of oxyanionic metalloid and metal species in alkaline solid wastes: A review

An overview is presented on possible mechanisms that control the leaching behaviour of the oxyanion forming elements As, Cr, Mo, Sb, Se, V and W in cementituous systems and alkaline solid wastes, such as municipal solid waste incinerator bottom ash, fly ash and air pollution control residues, coal fly ash and metallurgical slags. Although the leachability of these elements generally depends on their redox state, speciation measurements are not common. Therefore, experimental observations available in the literature are combined with a summary of the thermal behaviour of these elements to assess possible redox states in freshly produced alkaline wastes, given their origin at high temperature. Possible redox reactions occurring at room temperature, on the other hand, are reviewed because these may alter the initial redox state in alkaline wastes and their leachates. In many cases, precipitation of oxyanions as a pure metalate cannot provide a satisfactory explanation for their leaching behaviour. It is therefore highly likely that adsorption and solid solution formation with common minerals in alkaline waste and cement reduce the leachate concentration of oxyanions below pure-phase solubility.     

Deep-seated gravitational slope deformations and their influence on consequent mass movements (case studies from the highest part of the Czech Carpathians)

Gravitational spreading of mountain ridges displays primary disequilibrium of flysch mountain areas of the Czech Carpathians. The progression of various types of mass movements is a product of long-term ridge disintegration and is predisposed by the geological structure of the area and the upper Tertiary-Quaternary morphogenesis of the mountain area. Deep-seated slope deformations are spatially interconnected by the occurrence of some other types of slope deformations (e.g. debris flows, debris slides, slumps, rock avalanches, etc.), which pose a considerable risk for the existence of human society. An important causative factor in these dynamically developing hazardous processes is, among other factors, the way in which land has been used in the last three centuries. Therefore, the occurrence of various types of slope deformations is studied in terms of their relation to deep-seated gravitational deformations and in terms of other limiting factors (structural geological, morphological and climatic factors, manmade impacts, etc.). The paper presents several case studies of slope deformations (Velká Čantoryje Mt, Lysá hora Mt, Ropice Mt and Smrk Mt) in the area of the Outer Carpathians within the territory of the Czech Republic and also adverts to some consequences in terms of the socioeconomic structure of the landscape.     

Weed species diversity on arable land of the dryland areas of central Tanzania: impacts of continuous application of traditional tillage practices

This paper presents findings from a study that assessed influence of continuous application of a particular traditional tillage practice on weed species richness, diversity and composition and identifies weed species with positive benefits to the communities in semi-arid areas of Mpwapwa district, central Tanzania. In this area farmers apply three different traditional tillage practices which are no-till (NT), shallow tillage (ST) and Ridging System (RT). A total of 36 farm fields were surveyed in 2006/2007 cropping season where 63 weed species from 26 families were identified. Analysis of variance indicated significant differences between practices (p < 0.05), with NT practice having highest weed species richness and diversity. Among the five more prevalent weed species appearing, Bidens lineariloba was observed to exist in all the three practices. Community representatives during focus group discussions indicated 9 weed species out of 63 identified to have beneficial uses. These species are Cleome hirta, Amaranthus graecizans, Bidens lineoriloba, Bidens pilosa, Dactyloctenium aegyptium, Launaea cornuta, Heteropogon contortus, Tragus berteronianus and Trichodesma zeylanicum. Their main uses include leaf-vegetable, medicines, fodder and materials for thatching. From this study NT has highest weed species richness and diversity which therefore suggests that much more time is needed for weeding in this practice compared to other practice which was the farmers’ concern. It was also noted that although weed species have negative effects in crop production and production costs, they still play a vital role in food security and for the health of different people in marginal areas as well as for the complete ecosystem including micro and macrofauna.     

Flexural isostatic response of the Alps to increased Quaternary erosion recorded by foreland basin remnants,SE France

We test the hypothesis that flexural isostatic compensation of the mass removed by enhanced Quaternary erosion is responsible for uplift of the Western European Alps and their forelands. We use two well‐preserved and well‐dated (1.8 Ma) abandonment surfaces of foreland basin remnants in SE France (the Chambaran and Valensole plateaux) as passive benchmarks for tilting of the foreland. Estimating their initial slope from morphometric scaling relationships, we determine bulk post‐depositional tilting of 0.5–0.8% for these surfaces. The calculated isostatic response of the Alpine lithosphere to erosional unloading, using the method recently proposed by Champagnac et al. [Geology 35 (2007) 195–198] , yields a predicted tilting of 0.3–0.4% in the considered areas, explaining approximately half of the determined post‐depositional tilting. Such long‐term deformation being insensitive to cyclic loading/unloading because of glaciations, we suspect the other half to be related to as yet undetermined long‐wavelength and long‐lived tectonic process(es).     

Identification of chlorite and chlorite-related minerals in sediments

A scheme is presented for the identification and classification of chlorite and related minerals in sediments which is mainly based on X-ray characteristics of the orginal sample and the sample heated at 350°C and treated with K⁺ and with glycerol. Examples are given. It is emphasized that additional data about clay mineral genesis, electron microscopy, infrared spectroscopy and chemical analyses are needed for the ordening of a certain mineral in the proposed scheme. Many names of minerals so far found to occur in the clay separate of sediments proved to be synonymous (52 of a total of 88) and thus should be abandoned. They only give confusion and needlessly increase the many difficulties which already exist in the identification, classification and quantitative determination of this complicated group of minerals of about 36 well defined specimens which may be found in sediments.     

Benthic mineralization rates at two locations in the southern North Sea

Benthic oxygen uptake, sulphate reduction and benthic bacterial production were measured at two contrasting locations in the southern North Sea: the shallow and turbulent Broad Fourteens area in the Southern Bight, and the deeper Oyster Grounds, a deposition area, where thermohaline stratification occurs during summer. Oxygen uptake and sulphate reduction showed a clear seasonal pattern in the Broad Fourteens area, indicating a supply of carbon to the benthic system that is closely related to the standing stock of carbon in the water column. This close benthic-pelagic coupling is probably due to the influence of the tide in this part of the North Sea, which keeps the water column permanently mixed. At the Oyster Grounds, no seasonal pattern was observed. Peaks in oxygen uptake and sulphate reduction were found in winter. Irregularly occurring events, such as storms and fishery-related activities, are likely to affect the benthic mineralization patterns in this area. Annual benthic carbon mineralization rates estimated from oxygen uptake rates were 44 gC·m⁻² at the Broad Fourteens, and 131 gC·m⁻² at the Oyster Grounds, of which 26 and 28%, respectively, could be attributed to sulphate reduction (assuming an annual sulphide reoxidation rate of 100%). Although sulphate reduction rates in the southern North Sea are higher than previously suggested, aerobic respiration is the most important pathway for benthic carbon mineralization at the stations visited. Production rates of benthic bacterial carbon measured with labelled leucine were much higher than carbon mineralization rates based on oxygen uptake or sulphate reduction. This may either imply a very high bacterial carbon conversion efficiency, or point to shortcomings in the accuracy of the techniques. A critical evaluation of the techniques is recommended.